• Progress in Superconductivity and Cryogenics
• /
• v.23 no.3
• /
• pp.45-50
• /
• 2021

In this study, the effect of the size of B powder on the critical current density (J_c) of MgB₂ prepared by an in situ reaction process was investigated. Various combinations of B powders were made using a micron B, ball-milled B and nano B powders. Micron B powder was reduced by ball milling and the milled B powder was mixed with the micron B or nano B powder. The mixing ratios of the milled B and micron or nano B were 100:0, 50:50 and 0:100. Non-milled micron B powder was also mixed with nano powder in the same ratios. Pellets of (2B+Mg) prepared with various B mixing ratios were heat-treated to form MgB₂. T_c of MgB₂ decreased slightly when the milled B was used, whereas the J_c of MgB₂ increased with increasing amount of the milled B or the nano powder. The used of the milled B and nano B power promoted the formation MgB₂ during heat treatment. In addition to the enhanced formation of MgB₂, the use of the powders reduced the grain size of MgB₂. The use of the milled and nano B powder increased the J_c of MgB₂. The highest J_c was achieved when 100% nano B powder was used. The J_c enhancement is attributed to the high volume fraction of the superconducting phase (MgB₂) and the large grain boundaries, which induces the flux pinning at the magnetic fields.

• Communications of Mathematical Education
• /
• v.24 no.2
• /
• pp.445-474
• /
• 2010

The results of performing first survey after learning linear equation and second survey after 5 months to find out whether there is change in solving process while seventh grade students solve linear equations are as follows. First, as a result of performing McNemar Test in order to find out the correct answer ratio between first survey and second survey, it was shown as $p=.035^a$ in problem x+4=9 and $p=.012^a$ in problem $x+\frac{1}{4}=\frac{2}{3}$ of problem type A while being shown as $p=.012^a$ in problem x+3=8 and $p=.035^a$ in problem 5(x+2)=20 of problem type B. Second, while there were students not making errors in the second survey among students who made errors in the solving process of problem type A and B, students making errors in the second survey among the students who expressed the solving process correctly in the first survey were shown. Third, while there were students expressing the solving process of linear equation correctly for all problems (type A, type B and type C), there were students expressing several problems correctly and unable to do so for several problems. In conclusion, even if a student has expressed the solving process correctly on all problems, it would be difficult to foresee that the student is able to express properly in the solving process when another problem is given. According to the result of analyzing the reaction of students toward three problem types (type A, type B and type C), it is possible to determine whether a certain student is 'able' or 'unable' to express the solving process of linear equation by analyzing the problem solving process.

• Knowledge Management Research
• /
• v.3 no.1
• /
• pp.41-60
• /
• 2002

This paper defines measurement index items and weight of the index for the purpose of developing a performance measurement index that balancedly measures performance of B2B electronic commerce. The deductive research is used for the development of measurement index items and Analytic Hierarchy Process(AHP) method for the development of weight of the index. This paper has four performance measurement perspectives-finance, partners, business process and human resources, which based the existing researches of balanced performance measurement. This researchers developed eleven second level criteria and twenty-six indexes under four perspectives through the deductive method and expert interviews, weighted on the perspectives, criteria and indexes in accordance with the forms of e-marketplace-vertical and horizontal. As a result, the most important indexes are the maintenance of partners and the efficiency of operation process in the vertical e-marketplace. In the horizontal e-marketplace, the collection of partners, development and prediction processes are more important than other indexes.

• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.15-22
• /
• 1988

This paper analysis the process capability by applying experiment design to control alcohol in soluble matter mixing process of laundry soap. The results are summarized as follows: (1) Alcohol insoluble matter shows the tendency of increasing according to the mixing temperature (A) and beating velocity (B). (2) The most suitable working condition of the mixing process is $A_2B_2$, and 95% confidence limit of alcohol insoluble matter is $22.06{\pm}0.77%$. (3) The process capability index ($C_p$) of the mixing process is improved from 0.64 to 1.68.

• Journal of the Korean Ceramic Society
• /
• v.45 no.1
• /
• pp.60-64
• /
• 2008

[ $B_4C$ ] ceramics were fabricated by spark plasma sintering process and their sintering behavior, microstructure and mechanical properties were evaluated. Relative density of $B_4C$ ceramics could be achieved by spark plasma sintering method reached as high as 99% at lower temperature than conventional sintering method, in addition, without any sintering additives. The mechanical properties of $B_4C$ ceramics could be improved by the heat treatment at $1300^{\circ}C$ during sintering process which can be removed $B_2O_3$ phase from a $B_4C$ powder surface. This improvement results from the formation of a fine and homogeneous microstructure because the grain coarsening was suppressed by the elimination of $B_2O_3$ phase. Particularly, mechanical properties of the specimen experienced the $B_2O_3$ removing process improved over 30% compared with the specimen without that process.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.3
• /
• pp.128-137
• /
• 2024

In this study, the carburizing heat treatment process used in aircraft gear manufacturing was compared with the general carburizing heat treatment process using AISI 9310 steel. The process of carburizing followed by slow cooling, and then quenching after austenitizing(Process A) showed less compressive residual stress and less retained austenite in the surface layer compared to the process of quenching directly after carburizing(Process B). In prpcess B, there was a large amount of retained austenite when quenched immediately after carburization, and when treated with subzero, martensite rapidly increased and the compressive residual stress increased significantly, but at the same time, there is a risk of cracking due to severe expansion in volume. Therefore, in the case of aviation parts, it is believed that a step-by-step heat treatment cycle was adopted to ensure stability against heat treatment cracks. As a result of the final tempering after sub-zero treatment, the A process specimen showed a deeper effective case depth and HV700 depth and a higher hardness value above HV700 than the B process specimen.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.811-816
• /
• 1997

SiO2-P2O5-B2O3 glass soot was fabricated by flame hydrolysis deposition and their properties by SEM, XRD, TGA-DSC were investigated., The mechanism of consolidation process of a glass soot as a function of consolidation temperature was analyzed by SEM observations. In the XRD patterns, the crystalline peaks which seem to be generated from B2O3 and BPO4 were observed. When the temperature of heat treatment exceeded 105$0^{\circ}C$, the non-crystalline state of SiO2-P2O5-B2O3 glass was observed. In the TGA-DSC curves, the evaporation of water molecule by a sudden endothermic reaction was observed at 128$^{\circ}C$ and a broad endothermic peak was seen in the temperature range of 40$0^{\circ}C$-95$0^{\circ}C$, without any weight loss. Finally, this peak was began to recover its baseline at 953$^{\circ}C$. This point is equal to the temperature at which the densification begins. Furthermore, we observed that the addition of dopants such as P2O5 and B2O3 decrease the onset of consolidation temperature till 95$0^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.391-395
• /
• 2007

This study investigated the feasibility of enhanced electrokinetic (EK) remediation of soil contaminated with approximately 20000 Pb-mg/kg. Enhanced EK remediation was evaluated by using mixed solution (0.3 M acetic acid and 0.03 M EDTA, EK-M) and by exchanging electrodes for preventing precipitation of metal hydrate. For the EK-M, the lead removal efficiency was only 2% lower than the case where 0.03 M EDTA was solely used (EK-Blank, EK-B). Considering the costly expense of EDTA, the application of EK-M would be economically viable. The efficiency of of EK-E was higher by 2% than the EK-B method. More impertantly, the pH values of entire soil packed column presented to be neutral (7~8) in the EK-E process. Unlike to EK-B and EK-M, the deposition of heavy metals to any specific area was avoided in the EK-E process.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.402-409
• /
• 2004

I performed the research about the drinking water treatment by precoat filtration and activated carbon adsorption process in the D water treatment plant at Gwangju. D water treatment plant inlet water is supplied from Juam lake in Jeollanamdo. The results are as follows; 1. Element disk used in this experiment are R(pore size $10{\mu}m$), B(pore size $20{\mu}m$). And diatomaceous earth are A(cake pore size $3.5{\mu}m$), B(cake pore size $7{\mu}m$) and C(cake pore size $17{\mu}m$) 2. Filtrate of precoat filter during 30 min are B-C 10.2 > BB 5.7 > R-A 5.4 ($m^3/m^2$). 3. The water quality through B-C+AC and R-A+AC are DOC 1.76 mg/1, 1.288 m/l respectively. 4. total THMs produced by chlorination are $84.2{\mu}g/l$(B-C+AC), $66.11{\mu}g/l$ (R-A+AC), $97{\mu}g/l$ (rapid sand filtration water) respectively. 5. The R-A+AC and B-C+AC process can be substitute of CWTS.

• Korean Journal of Materials Research
• /
• v.23 no.2
• /
• pp.104-111
• /
• 2013

In this study, GaN powders were synthesized from gallium oxide-hydroxide (GaOOH) through an ammonification process in an $NH_3$ flow with the variation of $B_2O_3$ additives within a temperature range of $300-1050^{\circ}C$. The additive effect of $B_2O_3$ on the hexagonal phase GaN powder synthesis route was examined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transformation infrared transmission (FTIR) spectroscopy. With increasing the mol% of $B_2O_3$ additive in the GaOOH precursor powder, the transition temperature and the activation energy for GaN powder formation increased while the GaN synthesis limit-time ($t_c$) shortened. The XPS results showed that Boron compounds of $B_2O_3$ and BN coexisted in the synthesized GaN powders. From the FTIR spectra, we were able to confirm that the GaN powder consisted of an amorphous or cubic phase $B_2O_3$ due to bond formation between B and O and the amorphous phase BN due to B-N bonds. The GaN powder synthesized from GaOOH and $B_2O_3$ mixed powder by an ammonification route through ${\beta}-Ga_2O_3$ intermediate state. During the ammonification process, boron compounds of $B_2O_3$ and BN coated ${\beta}-Ga_2O_3$ and GaN particles limited further nitridation processes.