• International Journal of Industrial Entomology and Biomaterials
• /
• v.29 no.2
• /
• pp.145-152
• /
• 2014

The variation in the level of immune response related gene expression in silkworm, Bombyx mori following infection with Bombyx mori nucleopolyhedrovirus (BmNPV) was analyzed at different time intervals. The occlusion bodies of BmNPV orally inoculated to the two most divergent silkworm races viz., Sarupat (resistant to BmNPV infection) and CSR2 (susceptible to BmNPV infection) were subjected to oral BmNPV inoculation. The expression profile of gp 41 gene of BmNPV in the Sarupat and CSR2 races revealed that the virus could invade the midguts of both susceptible and resistant races. However, its multiplication was significantly less in the midgut of resistant race, while, in the susceptible race, the viral multiplication reached maximum level within 12 h. These findings indicate that potential host genes are involved in the inhibition of viral multiplication within larval midgut. The immune response genes arylphorin, cathepsin B, gloverin, lebocin, serpin, Hsp 19.9, Hsp 20.1, Hsp 20.4, Hsp 20.8, Hsp 21.4, Hsp 23.7, Hsp 40, Hsp 70, Hsp90 revealed differential level of expression on NPV infection. The gloverin, serpin, Hsp 23.7 and Hsp 40 genes are significantly up-regulated in the resistant race after NPV infection. The early up-regulation of these genes suggests that these genes could play an important role in baculovirus resistance in the silkworm, B. mori.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.153-162
• /
• 2002

Earlier breeding experiments undertaken at Central Sericultural Research and Training Institute, Mysore, India since a decade had resulted in the development of many productive and qualitatively superior bivoltine hybrids. However, the hot climatic conditions of tropics prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids. This has necessitated breeding of compatible bivoltine hybrids for year-round rearing. Accordingly, the Japanese hybrid, B2Ol ${\times}$ BCS12 which was found to be tolerant to high temperature was used as breeding resource material. Following hybridization and selection rearing of silkworms was taken up in SERICATRON (Environmental chamber with precise and automatic control facilities for uniform maintenance of temperature and humidity) at high temperature of $36{\times}1^{\circ}C$ and 85${\times}$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65{\times}$5% RH. Directional selection was resorted to the batches reared at 36$\pm$1$^{\circ}C$ till F$_{5}$ keeping pupation rate as important selection criteria. From $F_{2}% onwards the experiment was modified in such a way as to conduct normal rearing every alternate generation to regain the lost vitality due to continuous exposure to high temperature and high humidity stress. At $F_{2}$ , Oval and dumb-bell cocoons were separated out and designated as CSR18 and CSR19, respectively. By utilizing these lines at $F_{12}$, the hybrid CSR18$\times$CSR19 was prepared and studied for the thermotolerance by subjecting to stress condition at high temperature of 36$\pm$1$^{\circ}C$ and 85$\pm$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65${\times}$5% RH. The better performance of CSR18${\times}$CSR19 (survival > 88%) at $36{\times}1^{\circ}C$ clearly indicates the general superiority of CSR18${\times}$CSR19 with regard to high temperature tolerance over the productive hybrids and CSR18$\times$CSR19 can perform well in varied agro-climatic conditions of the tropics with optimum qualitative and quantitative characteristics.s.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.113-116
• /
• 2001

Fifth instar larvae of the new bivoltine hybrid (CSR2 ${\times}$ CSR5) were reared under different temperature and humidity viz., $20^{\circ}C$ and 85 ${pm}$ 5% R.H (T1), $25^{\circ}C$ and 70 ${pm}$ 5% R.H (T2-Optimum), $30^{\circ}C$ and 80% ${pm}$ 5 R.H (T3) and $35^{\circ}C$and 50 ${pm}$ 5% R.H (T4). The cocoon yield, cocoon characters and disease incidence were studied in normal (non infectious source, i.e control) rearing as well as in 1% infectious source of rearing. The results indicated that V instar larval duration was prolonged and cocoon weight was improved in T1. ERR and shell ratio were significantly improved and disease incidence was minimised in T2. Further significant difference was observed among the treatments with regard to spread of diseases.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.2
• /
• pp.81-86
• /
• 2005

The mode of transmission, effect on fecundity, hatching and tissues specificity of a microsporidian $(Lb_{ms})$ recovered from Lamerin breed of the silkworm Bombyx mori L. was studied and compared with standard strain Nosema bombycis. Peroral inoculation of $Lb_{ms}$ or N. bombycis to zeroday of $4^{th}$ instar larvae of silkworm was the most suitable method for producing information on development of stage specific mortality, pupation and obtaining infected adults for transovarial transmission studies. It was observed that pupal mortality, the percentage of moths emerged and the percentage of moths infected were significantly high in N. bombycis infected batches as compared $(Lb_{ms})$ in all the three tested breeds of the silkworm. However no significant difference was observed in larval mortality. The fecundity and hatchability was not affected significantly in $(Lb_{ms})$ infected adults, however significant reduction in egg production, fecundity, hatchability and increased egg retention was observed in mother moths infected with N. bombycis. The $(Lb_{ms})$ is transmitted both horizontally and vertically at lower rate due to its low rate of proliferation. The trans ovarial transmission of $(Lb_{ms})$ to the $F_1$ progeny generation through eggs averaged only $61.33\pm5.10\%$ whereas N. bombycis was transmitted at $100\%$. The $(Lb_{ms})$ had low oral infectivity and low transovarial transmission in silkworm B. mori.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.273-277
• /
• 2004

Variation in the size of the silk filament will determine the uniformity and quality of the silk reeled. In the present study, an attempt has been made to study the filament size variation in 6 multivoltine parental breeds and 9 multivoltine ${\times}$ bivoltine hybrids in all three seasons of a year. All multivoltine breeds and multivoltine ${\times}$ bivoltine hybrids showed variation in filament size throughout its length from the outer layer to inner layer. Results of the present study indicated that the size of the filament decreased from outer to inner layer. The decrease in filament size was sudden in some breeds/hybrids whereas it was gradual in other. Relationship between filament length to that of slope, average filament size to slope, and maximum filament size to slope was determined based on regression analysis. Regression analysis revealed significant positive correlation between slope vs average filament length (r=0.92$^{**}$) in multivoltine${\times}$bivoltine hybrids. Among parental breeds, 96C showed lowest slope of the curve (b-value: -0.00428) and 96A showed highest slope of the curve (b-value: -0.00269). Among 9 hybrids, PM${\times}$N $B_4$ $D_2$ recorded lowest slope value (b-value: -0.00328) and BL24${\times}$N $B_4$ $D_2$ showed highest value for slope of the curve (b-value: -0.00234). The breed 96C, which showed lowest slope value can be utilized for future breeding programmes to breed strains with less size deviation. Three multivoltine${\times}$bivoltine hybrids viz., PM${\times}$N $B_4$ $D_2$, 96E${\times}$CSR19 and BL67${\times}$CS $R_{101}$ , which showed less slope values (b-values: -0.00328, -0.00300 and -0.00297 respectively) can be utilized for commercial exploitation to produce uniform silk.k.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.99-106
• /
• 2011

The appearance of CSR changes the concept of the hull form design as well as structural design, since the application of CSR inevitably brings the lightweight increase of a ship. Keeping the original design constraints such as principal particulars, deadweight, and speed performance, designers have to increase the volume of the hull form. As a result, the entrance angle at bow end should become larger, which results in blunter waterline shape. For a slow and full ship having high $C_B$ more than 0.85, a new concept of bow shape has been required to alleviate the increase of wave-making resistance, since it is very difficult to improve waterline and frameline shape for such a full ship. In this paper a new bow shape of Capesize Bulk Carrier was developed to improve its wave-making characteristics without incompliance with the design constraints. For loading manual calculation, NAPA software was used. FLUENT6.3.26 and WAVIS1.4 were used to evaluate resistance performance of the subject hull forms. The newly designed hull form was tested at SSPA model basin for the final confirmation of resistance and propulsion performance of the ship. It was found that the new bow shape of a Capesize Bulk Carrier improved the resistance characteristics greatly compared to a conventional bulbous bow. The other benefits of new bow shape on the manufacturability were also investigated.

• Architectural research
• /
• v.21 no.2
• /
• pp.41-48
• /
• 2019

The purpose of this study is to research and development of 'Korea B(Benefit)-impact Model' for Sustainable Development. A concept evaluation model is 'B(Benefit)-impact model' in U.S.A. We use the results of surveys that examined the importance of social value issues to stakeholders in Korea to implement the benefit-impact model in Korea. In particular, in this paper, we use the KSI(Korean Sustainability Index) survey data conducted by the Korea Standards Association to evaluate the social value of the construction industry for representative stakeholders in the construction industry. The social value pool and the activity indicator pool used for the survey are created based on relevant International Standards; ISO 26000, ISO 14001, ISO 37001. As a result, Korea B-impact model for construction industry included the following five core social value issues; Strengthen transparency of corporate management, Ensure fair employment and employment relations, Efforts to prevent corruption, Conduct fair competition, Efforts to prevent environmental pollution. In addition, the US B-impact model has three limitations. First, it is unclear whether the key indicators have been derived while considering all issues of social value. Second, US B-impact model indicators are developed by the social responsibility experts, so it is necessary to review by stakeholders in each industry. Finally, it would be more effective for companies to use the B-impact model index as a more detailed activity indicator. When developing a Korea B-impact model, the following methods are used to supplement it. First, we reviewed all social value issues using international standards. Secondly, we used the KSI(Korean Sustainability index) survey results to derive the importance of the social value issue of construction industry in Korea. Finally, we have clearly matched the activity indicators by social value core issues based on the GRI Standard so that companies can actually use the Korea B-impact model for the construction sector. The detailed development stages and results of this study are as follows;.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.171-178
• /
• 2003

Four thermo-tolerant lines of silkworm, Bombyx mori, (L.) viz., A HT, B HT (Chinese type) and F HT, G HT (Japanese type) were evolved by utilizing the breeding resource material (identified from initial screening at a temperature of 31 ${\pm} 1^{\circ}C$ and relative humidity 85 ${\pm}$ 5%) through conventional breeding. These tolerant lines were crossed with productive breeds and forty four hybrids were evaluated on eight economic traits by the Multiple Trait Evaluation Index Method. Ten hybrids were short-listed based on the average evaluation index value larger than 50 for eight economic traits studied. The identified ten hybrids recorded higher index values (＞ 50) for most of the traits studied. Single hybrid G ${\times}$ CSR12 indicated average index value larger than 50 for six traits viz., pupation number (58), cocoon weight (67), shell weight (65), average filament length (74), raw silk % (69), reelability % (51) except for shell ratio % (41). The standard deviation of the cocoons in the above hybrid was 8.41 in the hybrid cocoon length and width measurement. However, two selected hybrids viz., A ${\times}$ CSR5 and G ${\times}$ CSR13 recorded average index value larger than 50 for all the traits viz., pupation number (57, 60), cocoon weight (50, 54), shell weight (56, 57), shell ratio percentage (59, 53), average filament length (55, 60), raw silk percentage (63, 67) and reelability percentage (53, 53). The standard deviation of the cocoons in the two selected hybrids viz., A ${\times}$ CSR5 and G ${\times}$ CSR13 was 8.41 and 8.06 respectively in the cocoon length and width measurement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.235-238
• /
• 2009

The study of our investigating and analyzing through experiments the performance on nonslip techniques, which has been nationally applied and represented, showed the following results. 1) In wearing shoes condition, regardless the shape of the surface and surface condition of the object, it satisfied the performance standard in cleaned and dried condition and the pulverulent body mixed liquid dispersed moisture condition. However, for the case of the non-slip agent treatment, not likely as the non-slip tape treatment case, the effect was not approved as it shows almost the same CSR as none treatment. 2) In bare foot condition, it satisfied the performance standard in most of the objects except for the Ceramic tile (A), Ceramic tile (B), pure and soapy water dispersed condition.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.1
• /
• pp.41-43
• /
• 2006

Lamerin breed of the silkworm Bombyx mori L. is the only mulberry silkworm breed which survives with an associated microsporidian $(Lb_{ms})$ infection from generations. This present comparative investigation has produced information on the influence of $Lb_{ms}$ on the growth and development of the breed. The $Lb_{ms}$ transmits tranovarially as well as perorally at low level. Larvae developed from the eggs laid by female, infected with $Lb_{ms}$ were as normal as larvae developed from the eggs laid by healthy female. In infected tissues early developmental stages and mature spores located intracellularly but did not show hypertrophy of cells of the host. The meronts and sporonts measures $0.46{\pm}0.25,\;1.11{\pm}0.05{\mu}m$ in length and $0.32{\pm}0.05,\;0.78{\pm}0.10{\mu}m$ in width respectively. The mature spore measures $4.36{\pm}0.06{\mu}m$ in length and $2.14{\pm}0.01{\mu}m$ in width.