• 한국주조공학회지
• /
• 제13권4호
• /
• pp.333-341
• /
• 1993

The effects of alloying elements on the structure and mechanical properties of compacted/vermicular graphite cast irons containing copper, tin and molubdenum for producing pearlite matrix, and also containing phosphorus and boron for increasing wear resistance, were investigated. The Brinell hardness and ultimate tensile strength of the specimens with the range of compositions, [1.5% Cu-0.05% Sn-(0.2-0.4)% Mo-(0.2-0.6)% P-(0.035-0.070)% B], was found to fall within in the following range, depending on their composition; Brinell hardness of BHN 250-315, ultimate tensile strength of $28.1-40.3kg/mm^2$. It was also found within this experiment that CV graphite cast irons possessing higher amount of phosphide eutectic exhibit better wear resistance, but the wear resistance became deteriorate when the area fraction of phosphide eutectics exceed more than 10%. From these experimental results, it could be concluded that the CV graphite cast iron containing 1.5% Cu, 0.05% Sn, 0.4% Mo, 0.2% P and 0.035% B showed good mechanical and wear resistance properties.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.72-78
• /
• 2013

Compacted graphite iron 340 was carried out the heat treatment from 873 to 1,273 K. Compacted graphite iron 340 was evaluated relationship between the sound velocity, the attenuation coefficient and the tensile strength. The obtained results are as following. The signal strength of C scan images were weak according to increasing of heat treatment temperature and time. The amplitude of A scan and B scan was also low. This can be cause that the graphite was grown into the type of vermicular, and the many of grain boundary with ultrasound scattering were increase. The sound velocity was depend upon the heat treatment temperature and time, the attenuation coefficient had nothing to do with the temperature and time. The higher the heat treatment temperature, the tensile strength and the sound velocity were decreased. However, the tensile strength was proportional to the sound velocity. The higher tensile strength, the faster the sound velocity.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1994년도 제2회 학술강연회논문집
• /
• pp.23-26
• /
• 1994

130mm D.B. 추진기관의 고온 시험에서 나타난 극심한 이상 연소 현상을 해결하기 위해 미세한 고체 입자들을 연소 가스에 분산시켜 불안정 연소를 억제하는 particulate damping 효과를 연구하였다. 고체 입자로서 효과적인 것으로 알려진 $K_2$$SO_4$. ZrC, Graphite를 CTPB, HTPB 고분자 물질에 충진시켜 epoxide, isocyanate 반응기와 가교 반응을 일으킴으로써 고무상의 탄성체 성질을 갖게 하는 $K_2$$SO_4$/CTPB, ZrC/Graphite/HTPB, ZrC/Graphite/AP/HTPB, ZrC/AP/HTPB 조성의 연소 안정제를 개발하였다. 이 연소 안정제는 외경 17mm, 길이 1000mm의 안정봉 형태로 제작하여 모타의 중심 cavity에 조립한 후 지상 연소 시험을 통하여 성능을 확인하였다. 시험 결과, 조성에 AP를 포함시켜 연소 안정제에 일정한 연소 속도를 부여하여 추진제 grain 연소 동안 고체 입자를 연소 가스에 분산되게 설계한 ZrC/Graphite/AP/HTPB, ZrC/AP/HTPB 조성의 연소 안정제가 불안정 연소 억제에 효과적인 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.671-677
• /
• 1999

This study has been performed to investigate REW(relative electrode wear) in condition of vari-ous pulse-on duration using the copper and graphite electrode with change of the electrode size on the heat treated STD11 which is extensively used for metallic molding steel with the EDM. The results obtained are as follows; a) Graphite has much benefits than copper electrode when rapid machining is done without electrode wear, b) Neative REW result from the electrode that is very liable attach to decomposition carbide c)Increasing of machining time cause to increase wear length of the copper electrode and decrease wear length of the graphite electorde d)The more pulse-on duration copper electrode has the less REW. e) The edge portion of the electorde wears remarkably at the beginning of machining,.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.775-777
• /
• 2007

Field emission properties of expanded graphite composite have been studied. Composite has been synthesized via shear mixing expanded graphite in ${\alpha}-terpineol$ and ethyl cellulose. Field emission properties, of screen printed composite has been measured at a static applied electric field. The details of the analysis have been presented.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.555-561
• /
• 2009

Expanded graphite (EG) is synthesized by chemical intercalation of natural graphite (NG) and rapid expansion at high temperature, with titanium n-butoxide (TNB) used as titanium source by a sol-gel method to prepare EG-TiO$_2$ composite. The performances of the prepared EG-TiO$_2$ composite are characterized by BET surface area measurement, scanning electron microscopy (SEM), X-ray diffraction patterns (XRD) and energy dispersive X-ray analysis (EDX). To compare the photocatalytic activities of the EG-TiO$_2$ composite, three kinds of dye solutions, methylene blue (MB), methylene orange (MO) and rhodamine B (RhB), and two kinds of light source, UV light and visible light (VL), are used. Comparing the results, it can be clearly seen that the degradation of all of the dye solutions under irradiation by UV light is much better than that under irradiation by visible light, and the decomposition of MB solution was better than that of both of MO and RhB solution.

• 한국환경과학회지
• /
• 제29권4호
• /
• pp.383-393
• /
• 2020

To increase electrolysis performance, the applicability of seawater to the iron-fed electro-Fenton process was considered. Three kinds of graphite electrodes (activated carbon fiber-ACF, carbon felt, graphite) and dimensionally stable anode (DSA) electrode were used to select a cathode having excellent hydrogen peroxide generation and organic decomposition ability. The concentration of hydrogen peroxide produced by ACF was 11.2 mg/L and those of DSA, graphite, and carbon felt cathodes were 12.9 ~ 13.9 mg/L. In consideration of durability, the DSA electrode was selected as the cathode. The optimum current density was found to be 0.11 A/㎠, the optimal Fe²⁺ dose was 10 mg/L, and the optimal ratio of Fe²⁺ dose and hydrogen peroxide was determined to be 1:1. The optimum air supply for hydrogen peroxide production and Rhodamine B (RhB) degradation was determined to be 1 L/min. The electro-Fenton process of adding iron salt to the electrolysis reaction may be shown to be more advantageous for RhB degradation than when using iron electrode to produce hydrogen peroxide and iron ion, or electro-Fenton reaction with DSA electrode after generating iron ions using an iron electrode.

• 한국전자파학회논문지
• /
• 제12권2호
• /
• pp.293-298
• /
• 2001

Polyaniline(EB)/NMP 용액에 carbonblack, grahpite Ag를 첨가하여 우수한 막질의 free standing film을 제조하였다. 1 mole HCI로 도핑된 polyaniline(ES) free standing film($\sigma$=5 S/cm, t=0.14 mm)을 제조하여 10 MHz~1 GHz의 주파수 영역에서 전자기파 차폐효과를 측정한 결과 23~25 dB의 차폐효율을 나타내었으며, carbonblack, grahpite, AG을 첨가하여 제조한 ES free standing film 과 camphorsulfonic acid(CSA)를 도핑한 polyaniline film의 전자기파 차폐효율 측정결과 각각 30~34dB, 36~42dB, 44~52dB, 34~43dB로 ES free standing film 보다 우수한 특성을 나타내었다.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.76-81
• /
• 2003

Friction welding of GCD45 spheroidal graphite cast iron and 2024 aluminum alloy has been studied, especially in terms of the joint faces and strength of friction welding. For appropriate results of the friction welding of GCD45 graphite cast iron and 2024 aluminum alloy, an insert of A1050 pure aluminum metal was used. The joint strength of the A1050 pure aluminum insert approached the maximum strength of 165.7Mpa, compared to 128MPa for the joint between GCD45 graphite cast iron and A1050 pure aluminum without the insert metal. Maximum strength, 165.7Mpa, was possible for the following optimum conditions: 20MPa for the friction pressure, P1, 60MPa for the upsetting pressure, P2, 1 second for the friction time, t1, 3000rpm for the rotation, N, and 0.3 seconds for the brake time, tB.

• Carbon letters
• /
• 제4권1호
• /
• pp.36-39
• /
• 2003

Carbon and carbon-based materials are used in nuclear reactors and there has recently been growing interest to develop graphite and carbon based materials for high temperature nuclear and fusion reactors. Efforts are underway to develop high density carbon materials as well as amorphous isotropic carbon for the application in thermal reactors. There has been research on coated nuclear fuel for high temperature reactor and research and development on coated fuels are now focused on fuel particles with high endurance during normal lifetime of the reactor. Since graphite as a moderator as well as structural material in high temperature reactors is one of the most favored choices, it is now felt to develop high density isotropic graphite with suitable coating for safe application of carbon based materials even in oxidizing or water vapor environment. Carboncarbon composite materials compared to conventional graphite materials are now being looked into as the promising materials for the fusion reactor due their ability to have high thermal conductivity and high thermal shock resistance. This paper deals with the application of carbon materials on various nuclear reactors related issues and addresses the current need for focused research on novel carbon materials for future new generation nuclear reactors.