• Computers and Concrete
• /
• 제25권1호
• /
• pp.1-14
• /
• 2020

This study presents applications of the multivariate adaptive regression splines (MARS) method for predicting the ultimate loading carrying capacity (N_u) of rectangular concrete-filled steel tubular (CFST) columns subjected to eccentric loading. A database containing 141 experimental data was collected from available literature to develop the MARS model with a total of seven variables that covered various geometrical and material properties including the width of rectangular steel tube (B), the depth of rectangular steel tube (H), the wall thickness of steel tube (t), the length of column (L), cylinder compressive strength of concrete (f'_c), yield strength of steel (f_y), and the load eccentricity (e). The proposed model is a combination of the MARS algorithm and the grid search cross-validation technique (abbreviated here as GS-MARS) in order to determine MARS' parameters. A new explicit formulation was derived from MARS for the mentioned input variables. The GS-MARS estimation accuracy was compared with four available mathematical methods presented in the current design codes, including AISC, ACI-318, AS, and Eurocode 4. The results in terms of criteria indices indicated that the MARS model was much better than the available formulae.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권1호
• /
• pp.13-17
• /
• 2003

A continuous solution of the Dirichlet boundary value problem for the heat equation $u_t$＝$a2u_{xx}$ using a fuzzy system is described. We first apply the Crank-Nicolson method to obtain a discrete solution at the grid points for the heat equation. Then we find a continuous function to represent approximately the discrete values at the grid points in the form of a bicubic spline function (equation omitted) that can in turn be represented exactly by a fuzzy system. We show that the computed values at non-grid points using the bicubic spline function is much smaller than the ones obtained by linear interpolations of the values at the grid points. We also show that the fuzzy rule table in the fuzzy system representation of the bicubic spline function can be viewed as a gray scale image. Hence, the fuzzy rules provide a visual representation of the functions of two variables where the contours of different levels for the function are shown in different gray scale levels

• Steel and Composite Structures
• /
• 제37권6호
• /
• pp.663-678
• /
• 2020

This paper proposes a novel topology optimization method generating multiple materials for external linear plane crack structures based on the combination of IsoGeometric Analysis (IGA) and eXtended Finite Element Method (X-FEM). A so-called eXtended IsoGeometric Analysis (X-IGA) is derived for a mechanical description of a strong discontinuity state's continuous boundaries through the inherited special properties of X-FEM. In X-IGA, control points and patches play the same role with nodes and sub-domains in the finite element method. While being similar to X-FEM, enrichment functions are added to finite element approximation without any mesh generation. The geometry of structures based on basic functions of Non-Uniform Rational B-Splines (NURBS) provides accurate and reliable results. Moreover, the basis function to define the geometry becomes a systematic p-refinement to control the field approximation order without altering the geometry or its parameterization. The accuracy of analytical solutions of X-IGA for the crack problem, which is superior to a conventional X-FEM, guarantees the reliability of the optimal multi-material retrofitting against external cracks through using topology optimization. Topology optimization is applied to the minimal compliance design of two-dimensional plane linear cracked structures retrofitted by multiple distinct materials to prevent the propagation of the present crack pattern. The alternating active-phase algorithm with optimality criteria-based algorithms is employed to update design variables of element densities. Numerical results under different lengths, positions, and angles of given cracks verify the proposed method's efficiency and feasibility in using X-IGA compared to a conventional X-FEM.

• 대한전자공학회논문지SP
• /
• 제46권2호
• /
• pp.30-39
• /
• 2009

사구체 영역의 추출은 신장염 진단 자동화에 있어서 매우 중요한 역할을 하고있다. 그러나 사구체 영역과 타 영역과의 차이가 그다지 뚜렷하지 않고 동시에 표본화 과정과 영상취득과정에서 발생한 얼룩이 원영상에 존재하기 때문에 사구체 영역을 정확히 추출하는 일은 간단치 않다. 본 연구에서는 신장 사구체 영역의 추출에 관해서 유전적 알고리듬에 의한 새로운 방법을 제안한다. 우선, 표준편차 ${\sigma}=2.1$과 ${\sigma}=1.8$의 라플라시안-가우시안 필터를 사용해서 저해상도와 고해상도 영상을 획득한 후, 그 임계값을 0으로 설정하여 2치화 영상을 취득하며, 그런 다음, 저해상도 영상으로부터 경계에지를 추출한다. 사구체의 경계는 B-스플라인 폐곡선으로 표현한다. 이 저해상도 영상에 있어서 B-스플라인 폐곡선을 결정하는 파라메타는 유전적 알고리듬을 이용한 탐색에 의해 잡음과 경계선이 도중에서 끊어지는 것을 방지한다. 그 다음, 보다 정밀한 사구체의 경계 에지를 획득하기 위해 고해상도 영상으로부터 절점수를 8개, 16개 및 32개로 순차적으로 증가시켜 수정한다. 최종적으로 실제 영상에 적용함으로써 제안한 본 방법의 유효성을 확인하였다.

• 한국재난정보학회 논문집
• /
• 제16권4호
• /
• pp.832-841
• /
• 2020

연구목적: 본 연구에서는 고차전단변형이론을 적용한 등기하해석 방법을 이용하여 기능경사복합재 판의 휨에 의한 역학적 거동을 해석하고자 하였다. 연구방법: 기능경사복합재 판의 역학적 거동을 보다 더 정확하게 해석하기 위해서 전단보정계수를 도입할 필요가 없는 기하학적 비선형을 고려한 고차전단변형이론을 이용하여 휨을 받는 기능경사복합재 판의 평형방정식과 지배방정식을 도출하였으며, 등기하 해석방법에 의한 수정된 Newton-Raphson 반복법을 이용하여 방정식들을 풀었다. 연구결과: 판의 용적비, 길이-두께 비 및 경계조건은 기능경사복합재 판의 휨 거동에 상당한 영향을 미치는 것을 알 수 있었다. 결론: 제안된 등기하해석 방법은 휨을 받는 기능경사복합재 판의 역학적 거동을 해석하는데 있어 정확하고 효과적인 수치해석 방법임을 확인하였다.

• 대한조선학회논문집
• /
• 제59권2호
• /
• pp.96-108
• /
• 2022

In this paper, we propose a systematic hull form variation technique which automatically satisfies the displacement constraint and guarantees a high level of fairness. This method is possible through multiple parameter correction curves. The present method is to improve the hull form variation method based on parametric modification function and consists of two sub-categories: SAC variation and section lines modification. For SAC variation, the utilization of two B-Spline curves satisfying GC¹ condition led to the satisfaction of displacement constraint and high level of fairness at the same time. Section lines modification methods involves in using two fuctions: the first is the waterplane modification function combining two cubic splines. the other function is the sectional area modification function consisting of 2nd order polynomial over the DLWL(Design Load Waterline) and 3rd order polynomial below the DLWL, This function enables not only the fundamental U-V section shape variation but also systematically modified section lines. The present method is expected to be more useful in the hull form optimization process using CFD compared to the existing method.

• Communications for Statistical Applications and Methods
• /
• 제30권1호
• /
• pp.95-107
• /
• 2023

Purpose: The statistical analysis of point processes on linear networks is a recent area of research that studies processes of events happening randomly in space (or space-time) but with locations limited to reside on a linear network. For example, traffic accidents happen at random places that are limited to lying on a network of streets. This paper applies techniques developed for point processes on linear networks and the tools available in the R-package spatstat to estimate the intensity of traffic accidents in Leon County, Florida. Methods: The intensity of accidents on the linear network of streets is estimated using log-linear Poisson models which incorporate cubic basis spline (B-spline) terms which are functions of the x and y coordinates. The splines used equally-spaced knots. Ten different models are fit to the data using a variety of covariates. The models are compared with each other using an analysis of deviance for nested models. Results: We found all covariates contributed significantly to the model. AIC and BIC were used to select 9 as the number of knots. Additionally, covariates have different effects such as increasing the speed limit would decrease traffic accident intensity by 0.9794 but increasing the number of lanes would result in an increase in the intensity of traffic accidents by 1.086. Conclusion: Our analysis shows that if other conditions are held fixed, the number of accidents actually decreases on roads with higher speed limits. The software we currently use allows our models to contain only spatial covariates and does not permit the use of temporal or space-time covariates. We would like to extend our models to include such covariates which would allow us to include weather conditions or the presence of special events (football games or concerts) as covariates.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.237-244
• /
• 2011

In this paper, a feature-based registration technique is proposed for pre-contrast and post-contrast lung CT images. It utilizes three dimensional(3-D) features with their descriptors and estimates feature correspondences by nearest neighborhood matching in the feature space. We design a transformation model between the input image pairs using a free form deformation(FFD) which is based on B-splines. Registration is achieved by minimizing an energy function incorporating the smoothness of FFD and the correspondence information through a non-linear gradient conjugate method. To deal with outliers in feature matching, our energy model integrates a robust estimator which discards outliers effectively by iteratively reducing a radius of confidence in the minimization process. Performance evaluation was carried out in terms of accuracy and efficiency using seven pairs of lung CT images of clinical practice. For a quantitative assessment, a radiologist specialized in thorax manually placed landmarks on each CT image pair. In comparative evaluation to a conventional feature-based registration method, our algorithm showed improved performances in both accuracy and efficiency.