• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.173-176
• /
• 2002

B $i_{3.3}$L $a_{0.7}$ $Ti_{3}$ $O_{12}$(BLT) 강유전체 박막을 Pt/Ti/ $SiO_2$/Si 기판위에 졸-겔법 (sol-gel method) 으로 스핀코팅하여 Metal-Ferroelectric-Metal(MFM) 구조의 커패시터를 형성하였다. BLT 박막의 결정성은 후속열처리 온도가 증가할수록 향상되었으며 $R_{근}$값은 as~coated된 BLT 박막의 경우 3.8$\AA$를 나타내었으나 열처리 온도를 $700^{\circ}C$로 증가한 경우 12.9$\AA$으로 거칠은 표면형상으로 변화되었다. $650^{\circ}C$로 열처리된 BLT 박막의 잔류분극 2Pr ($\pm$($P^{*}$ -$P^{ ^}$))값은 5V 인가전압에서 약 29.1 $\mu$C/$cm^2$을 나타내었다. 또한 $10^{10}$ 스위칭 cycles 가지 분극 스위칭을 반복한 후에도 뚜렷한 잔류분극의 변화를 발견할 수 없어서 우수한 피로특성을 나타내었다. 3V 전압에서 BLT 박막의 누설전류는 약 2.2$\times$$10^{-8}$ A/$cm^2$를 나타내었다.내었다.었다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.10
• /
• pp.559-563
• /
• 2000

The $(Sr_{1-x}Ca_x)TiO_3(SCT)$ thin films are deposited on Pt-coated(Pt/TiN/$SiO_2$/Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained by substitution of Ca at 15[mol%]. Also the composition of SCT thin films were closed to stoichiometry(1.081∼1.117 in A/B/ ratio). The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mol%]. The dielectric constant changes almost linearly in temperature ranges of -80∼+90[^${\circ}C$]. The temperature properties of the dielectric loss have a stable value within 0.02 independent of the substitutional contents of Ca. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 2000[kHz]. The current-voltage characteristics of SCT15 thin films showed the increasing leakage current as the measuring temperature increase.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1835-1837
• /
• 2005

$Bi_{3.25}Y_{0.75}Ti_3O_{12}$[BYT] ferroelectric thin films were deposited by RF-Sputtering method on the $Pt/Ti/SiO_2/Si$. We investigated the effects of processing condition (especially post-annealing) on the structural and dielectric properties of the BYT thin films. The BYT thin films were crystallized well at annealing temperature of $750^{\circ}C$ for 30min. Increasing the annealing temperature, the peak intensity of (117) and c-axis orientation were increased. The calculated lattice constants of BYT thin films were a=0.539nm, b=0.536nm, c=3.288nm. The thickness of the BYT thin films were 350nm. The dielectric constant and dielectric loss at a frequency of 100KHz were 73.3 and 0.021, respectively. The BYT thin films can be used as capacitors in the Ferroelectric Random Access Memory device.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1562-1564
• /
• 2003

In this study, PZT thin films were fabricated using sol-gel processing onto Si/$SiO_2$/Ti/Pt substrates. PZT sol with different Zr/Ti ratio(20/80, 30/70, 40/60, 52/48) were prepared, respectively. The films were fabricated by using the spin-coating method on substrates. The films were heat treated at $450^{\circ}C,\;650^{\circ}C$ by rapid thermal annealing(RTA). The preferred orientation of the PZT thin films were observed by X-ray diffraction(XRD), and Scanning electron microscopy(SEM). All of the resulting PZT thin films were crystallized with perovskite phase. The fine crystallinity of the films were fabricated. Also, we found that the ferroelectric properties from the dielectric constant of the PZT thin films were over 600 degrees, P-E hysteresis constant. And the leakage current densities of films were lower than $10^{-8}A/cm^2$. It is concluded that the PZT thin films by sol-gel process to be convinced of application for ferroelectric memory device.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.193-196
• /
• 2005

Low resistance Ni thin films for using NiSi formation and metallization by atomic layer deposition (ALD) method have been studied. ALD temperature window is formed between $200^{\circ}C\;and\;250^{\circ}C$ with deposition rate of $1.25{\AA}$/cycle. The minimum resistance of deposited Ni films shows $4.333\;{\Omega}/\square$ on the $SiO_2/Si$ substrate by $H_2$ direct purging process. The reason of showing the low resistance is believed to be due to format ion of the $Ni_3C$ phase by residual carbon in Bis-Ni The deposited film exhibits excellent step coverage in the trench having 1(100 nm) : 16 (1.6 um) aspect ratio.

• The Korean Journal of Physiology and Pharmacology
• /
• v.23 no.3
• /
• pp.181-189
• /
• 2019

Curcumin, an active ingredient of Curcuma longa L., can reduce the concentration of low-density lipoproteins in plasma, in different ways. We had first reported that curcumin exhibits hypocholesterolemic properties by improving the apolipoprotein B (apoB) mRNA editing in primary rat hepatocytes. However, the role of curcumin in the regulation of apoB mRNA editing is not clear. Thus, we investigated the effect of curcumin on the expression of multiple editing components of apoB mRNA cytidine deamination to uridine (C-to-U) editosome. Our results demonstrated that treatment with $50{\mu}M$ curcumin markedly increased the amount of edited apoB mRNA in primary mouse hepatocytes from 5.13%-8.05% to 27.63%-35.61%, and significantly elevated the levels of the core components apoB editing catalytic polypeptide-1 (APOBEC-1), apobec-1 complementation factor (ACF), and RNA-binding-motif-protein-47 (RBM47), as well as suppressed the level of the inhibitory component glycine-arginine-tyrosine-rich RNA binding protein. Moreover, the increased apoB RNA editing by $50{\mu}M$ curcumin was significantly reduced by siRNA-mediated APOBEC-1, ACF, and RBM47 knockdown. These findings suggest that curcumin modulates apoB mRNA editing by coordinating the multiple editing components of the edito-some in primary hepatocytes. Our data provided evidence for curcumin to be used therapeutically to prevent atherosclerosis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.479-479
• /
• 2013

산화물 반도체 물질을 이용한 Thin film transistor (TFT) 소자는 기존의 비정질 Si TFT와 저온 다결정 Si TFT 소자가 가지지 못하는 장점들이 보고되면서 차세대 디스플레이용 소자로 주목을 받고 있다. 그 중 TFT의 채널 물질로 a-IGZO가 많이 활용되고 있다. a-IGZO의 활용이 더 많아지고 있는 이유는 저온공정이 가능하고 3.2 eV의 큰 밴드갭으로 투명하며 높은 균일도, 캐리어 이동도를 모두 가지고 있기 때문이다. 본 연구에서는 산화물 물질인 IGZO를 채널 층으로 사용한 TFT소자에서 IGZO의 캐리어인 전자의 이동경로를 금속을 통하여 이동하게 함으로써 전기적 특성의 변화를 관찰하였다. TFT는 다수 캐리어가 게이트 전압에 의하여 박막 아래쪽에 채널을 형성하여 동작한다. 이 때 IGZO박막과 SiO2 사이의 Al을 증착하여 다수 캐리어인 전자의 이동도를 향상시켰다. 전극으로 사용되어지는 Al은 IGZO박막과 ohmic contant이기 때문에 전자의 이동이 어렵지 않기 때문이다. 소자 제작은 게이트로 도핑된 P형 기판을 사용하였고 게이트 절연체로 SiO2 200 nm를 증착하였다. 채널층로 IGZO를 증착하기 전에 게이트 절연체 위에 evaporation으로 Al을 20 nm를 증착하였다. 이때 mask는 $2.4{\times}10^{-4}cm^2$ 크기의 dot 형태를 사용하였다. Al을 증착 후 RF sputtering으로 IGZO를 30 nm 증착하였으며 $350^{\circ}C$에서 90 min 동안 열처리하였다. 소스와 드레인은 evaporation으로 Al을 100 nm 증착하였다. HB 4145B 측정기로 I-V 그래프를 통하여 전기적 특성의 변화를 관찰하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.132-132
• /
• 2012

Depositing $CaF_2$[0.6% lattice-mismatch] on the Si(001)-$4^{\circ}$ off surface [composed of a single (001) domain with regularly-arrayed double-layer DB steps and located between (1 1 19) and (1 1 21)] held at $700^{\circ}C$, $CaF_2$ molecules are preferentially adsorbed on the dimers and dissociated to Ca and F atoms. Dissociated Ca atoms form a silicide layer of a $2{\times}3$ structure on the (001) terrace, while F atoms are desorbed from the surface. Once the terrace is covered with a calcium silicide layer, CaF starts to be adsorbed selectively on the steps, as shown in Fig. (a). With $CaF_2$ deposition exceeding 1 ML, the (1 1 17) surface having 1-D $CaF_2$ nanodots are formed as shown in Fig. (b). By the present STM study, it has been clearly disclosed that the calcium silicide interfacial layer is preformed prior to adsorption of $CaF_2$ on vicinal Si(001) surface.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1720-1723
• /
• 2000

Boron doped conducting diamond thin film were grown on Si substrate by microwave plasma chemical vapor deposition from a gaseous feed of hydrogen, acetone/methanol and solid boron. The doping level of boron was controlled from 0ppm to $10^4$ppm (B/C). The Si substrate was tilted ca. 10$^{\circ}$ to make Si substrate have different height and temperature. Experimental results show that same condition but different temperature of Si substrate by height made different crystalline of diamond thin film. There were appeared 3$\sim$4 step of different crystalline morphology of diamond. To characterize the boron-doped diamond thin film, Raman spectroscopy was used for identification of crystallinity. To survey surface morphology, microscope was used. Grain size was changed gradually by different temperature due to different height. The Raman spectrum of film exhibited a sharp peak at 1334$cm^{-1}$, which is characteristic of crystalline diamond. The lower position of diamond film position, the more non-diamond component peak appeared near 1550$cm^{-1}$.

• Geomechanics and Engineering
• /
• v.1 no.1
• /
• pp.35-52
• /
• 2009

A significantly thick zone of steep slopes is commonly encountered above groundwater table and the soils within this zone are unsaturated with negative pore-water pressures (i.e., matric suction). Matric suction contributes significantly to the shear strength of soil and to the factor of safety of unsaturated slopes. However, infiltration during rainfall increases the pore-water pressure in soil resulting in a decrease in the matric suction and the shear strength of the soil. As a result, rainfall infiltration may eventually trigger a slope failure. Therefore, understanding of shear strength characteristics of saturated and unsaturated soils under shearing-infiltration (SI) conditions have direct implications in assessment of slope stability under rainfall conditions. This paper presents results from a series of consolidated drained (CD) and shearing-infiltration (SI) tests. Results show that the failure envelope obtained from the shearing-infiltration tests is independent of the infiltration rate. Failure envelopes obtained from CD and SI tests appear to be similar. For practical purposes the shear strength parameters from the CD tests can be used in stability analyses of slopes under rainfall conditions. The SI tests might be performed to obtain more conservative shear strength parameters and to study the pore-water pressure changes during infiltration.