• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1327-1331
• /
• 2004

In this paper constant power models for electric trains have been used to analyze the steady states of the AT feeding systems. There are some previous studies utilizing constant impedance models or constant current models. These mentioned models are easy to use, but even so they don't yield exact results because of the innate restraints of the models since linear models cannot represent the characteristic of constant power in inverter-driven trains. It is reasonable that the train be considered as a constant load model when it drives or as a constant source model when it applies regenerative brake. Nonlinear equations which reflect constant power model for train have been developed by considering mutual impedances between wires and AT's turn-ratio of 1:1, then these equations have been solved by N-R iterative method. The proposed method doesn't need any specific assumptions through either the process of developing equations or the process of acquiring solutions, so it can be said to be stricter than other conventional methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.393-397
• /
• 2001

A linear ultrasonic motor was designed by a combination of the first longitudinal and fourth bending mode, the motor consisted of a straight aluminum alloys bar bonded with a piezoelectric ceramics element as a driving element. That is, L$_1$-B$_4$ linear ultrasonic motor can be constructed using a multi-mode vibrator of longitudinal and bending modes. The simulation with variation of material characteristics of piezoceramic were performed as use of finite element analysis ANSYS 5.5, such as elastic compliance, piezoelectric constant, electro-mechanical coupling coefficient, poisson's ratio and density. The results of simulation, elastic compliance constant s$_{11}$ and piezoelectric constant d$_{31}$ had the most of influence on the elliptic-motion. This results consist with using transverse effect of material. The used motor were piezoceramics of 4 layers, and the dimensions were 65$\times$5$\times$3.5mm(LxWxt).).

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2332-2337
• /
• 2012

이 논문에서는 상수 모듈러스 오차의 정보 포텐셜에 대해 소개하고 채널왜곡에 의해 나타나는 큰 출력차이에 대해 상수 모듈러스 오차의 정보 포텐셜은 비교적 안정된 변화율을 나타난다는 특성이 결정궤환 구조의 오차 전파를 막을 수 있다는 점에 근거하여, 상수 모듈러스 오차의 정보 포텐셜의 견지에서 표현된 비용함수를 바탕으로 비선형 결정궤환 구조의 이퀄라이져 알고리듬을 제안하였다. 두 가지 채널 환경에 대한 시뮬레이션 결과로부터 스펙트럼 널이 없는 채널모델에서는 기존의 선형방식보다 3 dB 정도 향상된 정상상태 MSE 를 나타냈으며, 스펙트럼 널이 존재하는 열악한 채널 모델에 대해서는 오히려 약 9 dB 이상의 성능향상을 나타냈다.

• Carbon letters
• /
• 제4권4호
• /
• pp.185-191
• /
• 2003

Two types of carbon fiber based high modulus- and isotropic-pitch were exposed to isothermal oxidation in air and $CO_2$ gas and the weight change was measured by TGA apparatus. The kinetic equation was introduced $f=1-{\exp}(-at^b)$ and the constant b was obtained in the range of 1.02~1.68 for the isotropic fiber and obtained 0.91~1.93 for the high modulus fiber respectively. In considering the effect of the atmosphere for isothermal oxidation, the value of the constant b obtained in the carbon dioxide was higher than that obtained in the air. Therefore, it was found that the pitch based carbon fiber shows sigmoidal characteristic when it is oxidized in the carbon dioxide. In addition, it was also found that $k_f = 0.5$, which was reaction constant at f = 0.5, was a very useful parameter for evaluation of the oxidation reactivity of pitch based carbon fibers. According to the consideration, it is suggested that the conversion-time curves of the pitch based carbon fibers are correlated by normalized equation $f=1-{\exp}(-A{\tau}^B)$, where ${\tau}=t/t_f= 0.5$.

• Journal of Pharmaceutical Investigation
• /
• 제19권3호
• /
• pp.131-136
• /
• 1989

This study was attempted to investigate the dissolution rate and the bioavailability after oral administration of commercially available aspirin tablets in normal volunteers. The dissolution test was conducted in artificial gastric juice using basket method with three aspirin preparations (A, B and C) which were chemically equivalent. The results were as follows; The dissolution rate was higher in the order of three different brand B>A >C. Area under the blood concentration and peak blood concentration were larger in the order of brand A>B>C. Absorption rate constant and peak time were larger in the order of brand B>A>C, and there was a little difference in elimination rate constant and biological half-life. The correlation of the dissolution rate and absorption rate constant, as well as correlation of the dissolution rate and peak time showed significant linear relationship respectively. From the results of this experiment, it can be concluded that the bioavailability of aspirin tablets showed much difference according to commercial preparations, and that the bioavailability of aspirin tablets in human may be predicted from the results of dissolution rate studies.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.398-405
• /
• 2003

A fast response analyzer for measuring carbon dioxide concentration has been developed for transient characteristic and researches tested on internal combustion engine. The analyzer uses the well known NDIR(Non-Dispersive Infrared) method with miniaturized detection system, giving a time constant of approximately 30 microsecond, and sampling module consists of capillary tube. Since the transit time and the time constant of the sampling system depend on the sampling conditions, it is necessary to investigate the characteristics of sampling system before applied to exhaust gas measurement in engine. A unique method was designed to study the influence of the diameter of transfer sample line and operating conditions of the FRNDIR on transit time and time constant. A database of transit time and time constant was built up for different measured and simulated pressure conditions. The database can be used for correcting eventual $CO_2$ concentration measurement.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권2호
• /
• pp.69-76
• /
• 2002

To obtain a high performance in a vector controlled induction motor, it is essential to know the instantaneous position of the rotor flux which depends on the rotor time constant. But the rotor time constant mainly varies due to the temperature rise in the motor winding, so real time compensating algorithm is necessary. This paper proposes that it uses short duration pulses added to the constant flux command current and then resultant torque command current produced by speed controller is utilized for the rotor resistance estimation. This method has advantage with a low computational requirement and does not require voltage sensors. The proposed method is proved by simulations and experimentals.

• 전기의세계
• /
• 제13권4호
• /
• pp.60-74
• /
• 1964

계통의 발전력 및 송전용량이 계통부하에 비하여 어느정도 여유를 가지게 될때 그 부하를 각 발전소에 어떻게 분담시키면 가장 경제적일가 하는 계통의 경제적 부하배분 문제가 커다란 의의를 가지게 된다. 그동안 우리나라에서 전원개발에 꾸준하게 노력한 결과 전력사정이 어느정도 유급의 균형을 잡을 수 있을 만큼 완화되었고 또 앞으로의 전망도 금년 여름부터라도 상기의 경제적 급전을 실시할 수 있는 단계에 이르렀다함은 퍽이나 반가운 일이다. 본 문은 불환 실시된 계통의 경제적 급전에 대비하여 그 기초재료로서 소요되는 loss formula coefficients (B constant)를 주로 digital computer를 이용하여 산정한 것이다. 사용한 계통원 및 각종 재료는 직접 한국전력에서 보내온 것이다.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1208-1212
• /
• 2008

In this study, both structural and microwave dielectric properties of the $Ba_5B_4O_{15}$ (B=Ta, Nb) cation-deficient perovskite ceramics with sintering temperature were investigated. All samples of the $Ba_5B_4O_{15}$ (B=Ta, Nb) ceramics were prepared by the conventional mixed oxide method and sintered at $1325^{\circ}C{\sim}1575^{\circ}C$. The bulk density and dielectric constant of the $Ba_5Ta_4O_{15}$ ceramics were increased continuously with increasing of sintering temperature. The quality factor of the $Ba_5Ta_4O_{15}$ ceramics was increased in as the sintering temperature increases from $1375^{\circ}C{\sim}1475^{\circ}C$ but decreased at the temperatures above $1475^{\circ}C$. And the bulk density, dielectric constant and quality factor of the $Ba_5Nb_4O_{15}$ ceramics were increased in as the sintering temperature increases from $1325^{\circ}CP{\sim}1400^{\circ}C$ but decreased at the temperatures above $1400^{\circ}C$. In the case of the $Ba_5Ta_4O_{15}$ sintered at $1475^{\circ}C$ and $Ba_5Nb_4O_{15}$ ceramics sintered at $1400^{\circ}C$, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 25.15, 53,105 GHz, -3.06 $ppm/^{\circ}C$ and 39.55, 28,052 GHz, +5.7 ppm/$^{\circ}C$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1420-1421
• /
• 2006

In this study, structural and micowave dielectric properties of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) cation-deficient perovskite ceeramics. The specimens are prepared through the solid-state route. According to the XRD pattern, $Mg_{4}Ta_{2}O_9$ and $MgTa_{2}O_6$ phase exist in calcined and sintered $Mg_{5}Ta_{4}O_{15}$ powder. Also $Mg_{5}Ta_{4}O_{15}$ phase added with increasing sintering temperature. In the case of calcined and sintered $Mg_{5}Nb_{4}O_{15}$ powder, single phase of $Mg_{5}Nb_{4}O_{15}$ were appeared. The bulk density and quality factor of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) ceramics were increased with sinteming temperature in $1400^{\circ}C{\sim}1450^{\circ}C$, but these were decreased in another sintering temperature. Dielectric constant of the $Mg_{5}Ta_{4}O_{15}$ ceramics was increased continuously with increasing of sintering temperature. And the dielectric constant of the $Mg_{5}Nb_{4}O_{15}$ ceramics was increased in $1400^{\circ}C{\sim}1450^{\circ}C$ but decreased in $1475^{\circ}C$. In the case of the $Mg_{5}Ta_{4}O_{15}$ and $Mg_{5}Nb_{4}O_{15}$ ceramics sintered at $1450^{\circ}C$ for 5h, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 8.2, 259,473 GHz, -10.91 $ppm/^{\circ}C$ and 14, 37,350 GHz, -52.3 $ppm/^{\circ}C$, respectively.