• Title/Summary/Keyword: B Coefficient

Search Result 2,873, Processing Time 0.037 seconds

Voluntary Motor Control Change after Gait Training in Patients with Spinal Cord Injury (척수신경손상 환자의 보행훈련 전.후의 능동적 근육제어의 변화)

  • 임현균;이동철;이영신;셔우드아더
    • Journal of Biomedical Engineering Research
    • /
    • v.24 no.2
    • /
    • pp.133-140
    • /
    • 2003
  • In this study, muscle activity was measured using surface EMG (sEMG) during a voluntary maneuver (ankle dorsiflexion) in the supine position was compared pre and post gait training. Nine patients with incomplete spinal cord injury participated in a supported treadmill ambulation training (STAT), twenty minutes a day, five days a week for three months. Two tests, a gait speed test and a voluntary maneuver test, were made the same day, or at least the same week, pre and post gait training. Ten healthy subjects' data recorded using the same voluntary maneuvers were used for the reference. sEMG measured from ten lower limb muscles was used to observe the two features of amplitude and motor control distribution pattern, named response vector. The result showed that the average gait speed of patients increased significantly (p〈0.1) from 0.47$\pm$0.35 m/s to 0.68$\pm$0.52 m/s. In sEMG analysis, six out of nine patients showed a tendency to increase the right tibialis anterior activity during right ankle dorsiflexion from 109.7$\pm$148.5 $mutextrm{V}$ to 145.9$\pm$180.7 $mutextrm{V}$ but it was not significant (p〈0.055). In addition, only two patients showed increase of correlation coefficient and total muscle activity in the left fide during left dorsiflexion. Patients' muscle activity changes after gait training varied individually and generally depended on their muscle control abilities of the pre-STAT status. Response vector being introduced for quantitative analysis showed good Possibility to anticipate. evaluate, and/or guide patients with SCI, before and after gait training.

The impact of anthropogenic factors on changes in discharge and quality of water in the Hadano basin, Japan (인위적인 요인이 하천의 유량과 수질변화에 미친 영향 - 일본 하다노 분지를 사례 로 -)

  • ;Yang, Hea-Kun
    • Journal of the Korean Geographical Society
    • /
    • v.30 no.3
    • /
    • pp.242-254
    • /
    • 1995
  • The Hadano Basin is located at a distance of about 70kms and 60kms from Tokyo and Yokohama and lies in the south-west part of the Kanto region in Japan. The basin area, which correspoends to the catchment of the Kaname River, is about areal size of 60.7$\textrm{km}^2$ and extends about length of 8kms in E-W direction and about width of 5kms in N-S direction (Fig.1). The Hadano basin is filled with thick pile of the alluvum from deposits composed of volcanic materials, mostly came from the Hakone Volcano and overlain by Fuji Volcanic ashes. Fluvial deposits form the good aquifer, therefore water resources of Handano City has been largely depending upon the eroundwater. Urbanization and industrialization of the basin has been rapid in the last thirty years, after activation of "Factory Attraction Policy of Hadano City" in 1956. Growth in population and number of factory due to urbanization changed the land-use pattern of the basin rapidly and increased the water demands. Therefore, Hadano City exploited a new source of water supply, and have introduced the prefectureal waterworks since 1976. On the other hand, the rapid urbanization has brought about the pollution of streams in the basin by domestic sewage and industrial waste water. Diffusion rate of sewerage systems in Hadano City is 38% in 1993. In ordcr to examine the impact of anthropogenic factors on river environments, the author took up the change of land-use and diffusion area of sewerage as parameters, and performed field surveys on water discharge and quality. The survey has been made at upstream and downstream of the main stream regularly per month, to get informati ons about the variation of discharge and water quality aiong the stream and its diurnal fluctuation. Annual variation has been analyzed based the data from Hadano City Office. The results are summarized as follows. 1. Stream discharge has been increasing by urbanization (Fig.3). Water quality (C $l^{-10}$ , N $H^{+}$$_{ 4}$-N, BOD) has been improving gradually after the application of sewerage service, yet water pollution load at the lower station has increased than that at the upper one because of the larger anthropogenic discharge volumes (Fig.4). 2. Corrclation coefficient of discharges between upper and lower was 0.81-0.92. Pollutant loads of the R. Kamame after the confluence with R. Kuzuha grew up by 2.4-3.7 times as compared with its upper reaches, and it increased to 3.7-6.9 times after the confluence with the R. Muro (Fig.5). 3. The changes of water quality along the stream can be divided into two groups (Fig.6a). First: water quality of the R. Kaname and R. Shijuhachisse is becoming worse towards the lower reaches because the water from branches are polluted. Second: water quality are improved in the lower where spring and small branch streams supply clear water, for example R. Mizunashi, R. Muro and R. Kuzuha. 4. Measured discharge at the upper station in the R. Shijuhachisse is 0.153㎥/sec, and about 55% of this is recharged until it reaches to the lower point. The R. Mizunashi has a discharge of 1.155㎥/sec at the upper point, is recharged 0.24㎥/sec until the midstream and groundwater spring 0.2㎥/sec at the lower reaches. R. Kuzuha recharged all the mountain runoff (0.2㎥/sec) at the upper reaches. The R. Muro is supplied by many springs and the estimated discharge of spring was 0.47㎥/sec (Fig.6b). 5. Diurmal variations in discharge and water quality are influenced clearly by domestic and industrial waste waters (Fig.7, 8).ed clearly by domestic and industrial waste waters (Fig.7, 8).

  • PDF

Hand-Arm Vibration and Noise Levels of Double-Hammer Type and Oil-Pulse Type Impact Wrenches in Automobile Assembly Lines (자동차 조립라인에서 이중-헴머형(Double-hammer type) 임펙트 렌치와 오일-펄스형(Oil-pulse type)임펙트 렌치 에어공구의 국소진동가속도 및 소음수준)

  • Jeung, Jae-Yeal;Kim, Jung-Man
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.5 no.2
    • /
    • pp.147-159
    • /
    • 1995
  • This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

  • PDF

A Study on the Knowledge and Attitude about Tuberculosis on Elementary School student in Seoul (서울 시내 일부 국민학교 6학년 학생들의 결핵에 대한 지식 및 실태에 관한 연구)

  • Kim, Eun-Hee
    • Research in Community and Public Health Nursing
    • /
    • v.5 no.2
    • /
    • pp.181-202
    • /
    • 1994
  • This study was conducted in order to grasp the condition of the student's knowledge and attitude about tuberculosis. And to offer the basic materials for the prevent tuberculosis in elementary school. The objects were comprised 395 of volunteered 6th grade students who study in two elementary schools. The material of this study was the questionaire(chronbach $\alpha=.9016$) suited to the purposed of this research which has been made through studying references. All the questionaire were collected immediately without explanation. The data was collected from 13rd to 25th of May on 1994. Analysis of the data was done utilizing SPSS for percentage, mean, ANOVA and pearson-Correlation Coefficient. The Result are as follows; 1. General features of the objects of study. Sex distribution was similar. Salary of 1000-1500 thousand won were highest (40.2%), nuclear family was highest (87.1%), fathers of graduated high school were the highest(44.0%), mothers of graduated high school were the highest(56.8%). And there was nobody about tuberculosis patient in one's close relatives were highest(95.4%). 2. The conditions of attitude about tuberculosis. Having experience of tuberculin test were highest(59.0%). Less than 9mm indulation among the tuberculin tested group were 85.1%, more than indulation were 14.9%. Have a B. C. G. injection among the less than 9mm indulation were 83.2%. Leave alone among the more than 10mm indulation were 56.0%. Think it too much trouble to do not tuberculine test were 63.0%. Do not take a chest X-ray in the past were 60.3%. And take a chest X-ray in the past were 39.7%. Health educated group was 74.3%. If tuberculosis sign was developed, notified to parent was 73.8%. 3. The condition of knowledge about tuberculosis. When 5 points was given to 'very affiming' and 1 point was given to 'very deny', the total average was 3.54. And symptom of tuberculosis secion was 3.67, vaccination of tuberculosis section was 3.66, tuberculine test section was 3.56, epidemiology of tuberculosis section was 3.54, infection of tuberculosis section was 3.38. And every section showed affirmative correlation(P<.001). 4. Correlation between the general features and attitude variables. High incomed group may have more attitude on tuberculin test than low incomed group($x^2=16.$ 190, P<.01). High educated group may have more attitude on tuberculin test than low educated group(Father : $x^2=28.530$, P<.001, Mother: $x^2=26.060$, P<.001). High educated group may have more attitude on health education than low educated group(Father: $x^2=20.$ 767, P<.000, Mother: $x^2=10.639$, P<.05). Nuclear family may have more attitude on notify to parent than others($x^2=51.45$, P<.000). Tuberculosis patient in one's close associates have more attitude on notify to parent than others($x^2=51.$ 45, P<.000). 5. Difference between the general features and knowledge of tuberculosis. High incomed group were highest score in knowledge (F=3.99, P<.01). High educated group were highest score in knowledge(Father : F=8.81, P<.000, Mother: F=9.09, P<.000). 6. Difference between the attitude and knowledge of tuberculosis. Tuberculin tested group were highest score in knowledge(t=9.88, P<.000). Taken chest X-ray group were highest score in knowledge (t=2.07, P<.05). Received health education group were highest score in knowledge(t=6.83, P<.000). Notified symptoms to teachers and parent group were highest score in knowledge(F=3.89, P<.01).

  • PDF

Correlation Coefficients between Pine Mushroom Emergence and Meteorological Elements in Yangyang County, Korea (양양지역 송이 발생과 기상요소의 상관관계)

  • Shim, Kyo-Moon;Ko, Cheol-Soon;Lee, Yang-Soo;Kim, Gun-Yeob;Lee, Jeong-Taek;Kim, Soon-Jung
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.9 no.3
    • /
    • pp.188-194
    • /
    • 2007
  • The relationships between pine mushroom emergence and meteorological factors were analyzed with three years (from 2003 to 2005) of measurement data at Yangyang site, in order to evaluate the effect of micrometeorological environment on pine mushroom production. fine mushroom was daily monitored and collected in the survey area during the its producing period (approximately one month). Pine mushroom production was highest in 2005 with the meteorological conditions of high temperature and frequent rainfalls in October. The production was lowest in 2004 due to dry conditions from mid September to late October, The meterological factors related to humidity (i.e., relative humidity, soil water content, and precipitation) were better correlated than those related to temperature (i.e., air and soil temperature, soil heat flux and solar radiation) with pine mushroom production. However, all of the correlation coefficients were statistically insignificant with values ranging from 0.15 to 0.46. Such poor correlations may be attributed to various other environmental conditions (e.g., topography, soil, vegetation, other fungi, the relationship between pine mushroom and pine forest) affecting pine mushroom production. We found that a mycelium requires a stimulation of low temperature (of three-day moving average) below $19.5^{\circ}C$, in order to farm a mushroom primordium which grows to pine mushroom after 16 days from the stimulation. We also found that the pine mushroom production ended when the soil temperature (of three-day moving average) fell below $14.0^{\circ}C$.

Monthly Change of the Length-weight Relationship of the Loach (Misgurnus anguillicaudatus) Population in Paddy Fields by Farming Practices (영농방법에 따 른 시기별 미꾸리 개체군의 전장-체중 분석)

  • Shin, Hyun-Seon;Song, Young-Ju;Kwon, Soon-Ik;Eo, Jinu;Lee, Seung-Hyun;Kim, Myung-Hyun
    • Korean Journal of Environmental Biology
    • /
    • v.36 no.1
    • /
    • pp.1-10
    • /
    • 2018
  • The objective of this study was to identify the effects of farming practices on the Misgurnus anguillicaudatus population, including their habitat characteristics, length frequency and the length-weight relationships of M. anguillicaudatus population; this study investigated the differences of the population living in environment-friendly (EFP) and conventional paddy fields (CP). As the result of age distribution by length frequency of M. anguillicaudatus, the EFP showed various age distributions which were not present in the CP. In particular, the age $0^+$ (28-51 mm) of individuals in the CP were significantly lower than those in the EFP. In May, the number of individuals was similar in CP and EFP, which led to the assumption that the M. anguillicaudatus population living in a shallow depth was killed by rotary and tillage works. The regression coefficient (b) in relation to the length-weight of M. anguillicaudatus population was 3.0, which appeared relatively stable as a habitat condition in the CP and EFP, except in June. The condition factor for M. anguillicaudatus population in the CP and the EFP showed a relatively stable monthly population, except in June which was likely to be influenced by the stress to lay their eggs or chemicals such as the use of pesticides. This change of habitat characteristics and length-weight relationship on M. anguillicaudatus population in rice paddy fields was influenced by farming practices as well as the time of year.

Predicting In Sacco Rumen Degradation Kinetics of Raw and Dry Roasted Faba Beans (Vicia faba) and Lupin Seeds (Lupinus albus) by Laboratory Techniques

  • Yu, P.;Egan, A.R.;Leury, B.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.13 no.10
    • /
    • pp.1377-1387
    • /
    • 2000
  • Two laboratory techniques: (1) an in vitro method with two procedures for measuring protein degradabilities and (2) an in vitro method with three procedures for measuring protein solubility, were investigated to determine which laboratory techniques could most accurately predict the quantity of rumen protein degradation kinetics of legume seeds after dry roasting under various conditions, in terms of (1) rumen protein disappearance ($D_j$, where j=0, 2, 4, 8, 12, 24 and 48 h incubation), (2) rumen protein effective degradability (EDCP), (3) the parameters describing rumen degradation characteristics (the soluble fraction: S, the potentially degradable fraction: D, undegradable fraction: U, lag time: T0 and the degradation rate: Kd) and (4) rumen bypass protein (BCP), which were determined by the method accepted internationally at present, in sacco nylon bag technique using the standardized Dutch method. Feeds evaluated were the raw and dry roasted whole faba (Vicia faba) beans (WFB) and whole lupin (Lupinus albus) seeds (WLS), each was dry roasted under various conditions (at 110, 130 or $150^{\circ}C$ for 15, 30 or 45 min). In vitro protein degradability ($D_1$_Auf and $D_{24}$_Auf) were determined using the modified Aufr re method by enzymatic hydrolysis for 1 h and 24 h using a protease extracted from Streptomyces griseus in a borate-phosphate buffer. In vitro protein solubility ($bf_1$_S, $bf_2$_S, $bf_3$_S) was measured in a borate-phosphate buffer with three different procedures. Results from laboratory techniques (in vitro) were correlated and linearly regressed with in sacco results. Of the three procedures of in vitro protein solubility evaluated, none of them could predict in sacco results with good precision. The highest Pearson correlation coefficient ($R^2$) was less than 0.50. Of two procedures of in vitro protein degradability studied, the $D_1$_Auf values were closely correlated with in sacco parameters: Kd, EDCP and %BCP with high R' values: 0.82, 0.85 and 0.85, respectively, and closely correlated with in sacco $D_j$ at 2, 4, 8 and 12 h rumen incubation with high $R^2$ values: 0.83, 0.91, 0.93 and 0.83, respectively. The $D_{24}$_Auf values could not predict in sacco results. The highest $R^2$ value was less then 0.40. These results indicated that in vitro protein solubility measured in borate-phosphate failed to identify differences in the rate and extent of protein degradation of legume seeds after dry roasting under various conditions and thus should not be used to predict rumen degradation, particularly for heat processed feedstuffs. But in vitro protein degradability using the modified Aufr re method by enzymatic hydrolysis for 1 h or possibly an intermediate time (>1 h and <24 h) is a promising laboratory procedure to detect effectiveness of dry roasting legume seeds on rumen protein degradation characteristics and could be used as a simple laboratory method to predict the rate and extent of protein degradation in the rumen in sacco with high accuracy. The equations to predict EDCP, Kd and BCP of dry roasted legume seeds (WLS and WFB) under various conditions are as follow: For both: EDCP (%)=-1.37+1.06*$D_1$_Auf ($R^2=0.85$, p<0.01). For both: Kd (%/h)=-21.81+0.49*$D_1$_Auf ($R^2=0.82$, p<0.01). For both: %BCP=103.37-1.07*$D_1$_Auf ($R^2=0.85$, p<0.01).

Changes in Quality of Carrot During Storage by Hydrocooling (냉수냉각에 의한 당근의 저장중 품질변화)

  • Jeong, Jin-Woong;Kim, Byeong-Sam;Kim, Oui-Woung;Nahmgung, Bae;Lee, Sung-Hyun
    • Korean Journal of Food Science and Technology
    • /
    • v.28 no.5
    • /
    • pp.841-849
    • /
    • 1996
  • Quality changes in carrot during storage were studied to investigate the efficiency, cooling properties and the washing and storage effects of hydrocooling method. As a result of plotting the nondimensionalized carrot temperature versus cooling time, its cooling rate coefficient was shown $-0.0171min^{-1}{\sim}-0.0121min^{-1}\;(R^{2}=0.99{\sim}0.95)$, and $-0.141min^{-1}{\sim}-0.0038min^{-1}\;(R^{2}=0.98{\sim}0.92)$ in package condition7. Rate of weight loss and change in moisture content of carrot were not significantly different by treatment conditions during storage at $5^{\circ}C$. During storage at $15^{\circ}C$, however, weight loss of hydrocooled carrot was lower than that of non-treated carrot from the 30th to 40th day. Especially, PE was more effective than tray for packaging hydrocooled carrots. Carrot pretreated wish sterilizing agent, packed with PE vinyl film and with residual water removed after hydrocooling showed a lower decaying-rate than any other carrots. Changes in Hunter L and b values of hydrocooled carrot were slower than those of non-treated one. The carotenoids contents of stored carrot $(0.736{\sim}0.780mg%)$ decreased to $9{\sim}43%$ after 40 days of storage at $5^{\circ}C$ and before 20 days of storage at $15^{\circ}C$. It could be presumed that the addition of sterilizing agent reduced the initial level of overall microbial and coliform counts and their growth rate during storage.

  • PDF

The Influence of Water Temperature and Salinity on Filtration Rates of the Hard Clam, Meretrix petechialis (말백합의 연령별 여과율에 미치는 수온과 염분의 영향)

  • Lim, Kyeong-Hun;Jang, Kyu-Sang;Kim, In-Sou;Lee, Jeong-Ho;Shin, Hyun-Chool
    • The Korean Journal of Malacology
    • /
    • v.24 no.3
    • /
    • pp.175-188
    • /
    • 2008
  • This study was performed to describe the influence of water temperature and salinity on the filtration rate of the hard clam, Meretrix petechialis. The filtration rates of hard clams showed significant differences depending on both water temperature and age group (two-way ANOVA, p < 0.001). The filtration rate of all the hard clams, aged from 1 to 4 years, was generally reduced in low temperature range ( $5-15^{\circ}C$). As the water temperature increased, the filtration rate increased exponentially. The filtration rate was relatively high in $20-30^{\circ}C$ water temperature range, but rapidly decreased again at around $35^{\circ}C$. Variations in the data for filtration rates of hard clams, relative to age and changing water temperature, were used to determine the temperature coefficient $Q_{10}$ in each water temperature range. In $5-15^{\circ}C$ temperature range, every age group showed the highest $Q_{10}$ figure. It was found that on the whole, the higher the water temperature was, the lower the number of $Q_{10}$ was. Regardless of age, the number of $Q_{10}$ was higher in the lower water temperature range. In $25-35^{\circ}C$ temperature range, the number of $Q_{10}$ was less than 1.00 in all age groups, implying that this is the range in which the filtration rate decreased. Variations in the filtration rate also showed very clear differences (two-way ANOVA, p < 0.001) according to changing salinity and age. All the age groups, from 1 to 4 year olds, showed low filtration rates at both low salinity (10-15 psu) and high salinity (40 psu). The highest filtration rate was recorded at 30 psu, and relatively high filtration rates were found around 30 psu. However, the Student-Newman-Keuls post hoc multiple comparison test found that the hard clams in the 1-year group showed high filtration rates in a relatively narrower salinity range compared to those in the 2, 3, and 4 year groups. In other words, hard clams in the 2, 3, and 4 year groups showed high filtration rates at higher levels of salinity.

  • PDF

Thin Layer Drying and Quality Characteristics of Ainsliaea acerifolia Sch. Bip. Using Far Infrared Radiation (원적외선을 이용한 단풍취의 박층 건조 및 품질 특성)

  • Ning, Xiao Feng;Li, He;Kang, Tae Hwan;Lee, Jun Soo;Lee, Jeong Hyun;Ha, Chung Su
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.6
    • /
    • pp.884-892
    • /
    • 2014
  • The purpose of this study was to investigate the drying characteristics and drying models of Ainsliaea acerifolia Sch. Bip. using far-infrared thin layer drying. Far-infrared thin layer drying test on Ainsliaea acerifolia Sch. Bip. was conducted at two air velocities of 0.6 and 0.8 m/sec, as well as three drying temperatures of 40, 45, and $50^{\circ}C$ respectively. The drying models were estimated using coefficient of determination and root mean square error. Drying characteristics were analyzed based on factors such as drying rate, leaf color changes, antioxidant activity, and contents of polyphenolics and flavonoids. The results revealed that increases in drying temperature and air velocity caused a reduction in drying time. The Thompson model was considered suitable for thin layer drying using far-infrared radiation for Ainsliaea accerifolia Sch. Bip. Greenness and yellowness values decreased and lightness values increased after far-infrared thin layer drying, and the color difference (${\Delta}E$) values at $40^{\circ}C$ were higher than those at $45^{\circ}C$ and $50^{\circ}C$. The antioxidant properties of Ainsliaea acerifolia Sch. Bip. decreased under all far-infrared thin layer drying conditions, and the highest polyphenolic content (37.9 mg/g), flavonoid content (22.7 mg/g), DPPH radical scavenging activity (32.5), and ABTS radical scavenging activity (31.1) were observed at a drying temperature of $40^{\circ}C$ with an air velocity of 0.8 m/sec.