• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.717-723
• /
• 2007

Statement of problem. Unreasonable distal cantilevered implant-supported prosthesis can mask functional problems of reconstruction temporarily, but it can cause serious strain and stress around its supported implant and surrounding alveolar bone. Purpose. The purpose of this study was to evaluate strain of implants supporting distal cantilevered fixed prosthesis with two different cantilevered length under distal cantilevered static load. Material and methods. A partially edentulous mandibular test model was fabricated with auto-polymerizing resin (POLYUROCK; Metalor technologies, Stuttgart, Swiss) and artificial denture teeth (Endura; Shofu inc., Kyoto, Japan). Two implants-supported 5-unit screw-retained cantilevered fixed prosthesis was made using standard methods with Type III gold alloy (Harmony C&B55; Ivoclar-vivadent, Liechtenstein, Germany) for superstructure and reinforced hard resin (Tescera; Ivoclar-vivadent, Liechtenstein, Germany) for occlusal material. Two strain gauges (KFG-1-120-C1-11L1M2R; KYOWA electronic instruments, Tokyo, Japan) were then attached to the mesial and the distal surface of each standard abutment with adhesive (M-bond 200; Tokuyama, Tokyo, Japan). Total four strain gauges were attached to test model and connected to dynamic signal conditioning strain amplifier (CTA1000; Curiotech inc., Paju, Korea). The stepped $20{\sim}100$ N in 25 N increments, cantilevered static load 8mm apart (Group I) or 16mm apart (Group II), were applied using digital push-pull gauge (Push-Pull Scale & Digital Force Gauge, Axis inc., Seoul, Korea). Each step was performed ten times and every strain signal was monitored and recorded. Results. In case of Group I, the strain values were surveyed by $80.7{\sim}353.8{\mu}m$ in Ch1, $7.5{\sim}47.9{\mu}m/m$ in Ch2, $45.7{\sim}278.6{\mu}m/m$ in Ch3 and $-212.2{\sim}718.7{\mu}m/m$ in Ch4 depending on increasing cantilevered static load. On the other hand, the strain values of Group II were surveyed by $149.9{\sim}612.8{\mu}m/m$ in Ch1, $26.0{\sim}168.5{\mu}m/m$ in Ch2, $114.3{\sim}632.3{\mu}m/m$ in Ch3, and $-323.2{\sim}-894.7{\mu}m/m$ in Ch4. Conclusion. A comparative statistical analysis using paired sample t-test about Group I Vs Group II under distal cantilevered load shows that there are statistical significant differences for all 4 channels (P<0.05).

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.780-786
• /
• 2007

Statement of problem. The performance and maintenance of implant-supported prostheses are primarily dependent upon load transmission both at the bone-to-implant interface and within the implant-abutment-prosthesis complex. The design of the interface between components has been shown to have a profound influence on the stability of screw joints. Purpose. The Purpose of this study was to compare the strength and the fatigue resistance of 1-piece and 2-piece abutment connected to oral implant, utilizing an internal conical interface. Material and methods. Twenty $Implatium^{(R)}$ tapered implants were embedded to the top of the fixture in acrylic resin blocks. Ten $Combi^{(R)}$(1-piece) and $Dual^{(R)}$(2-piece) abutments of the same dimension were assembled to the implant, respectively. The assembled units were mounted in a testing machine. A load was applied perpendicular to the long axis of the assemblies and the loading points was at the distance of 7mm from the block surface. Half of 1-piece and 2-piece abutment-implant units were tested for the evaluation of the bending strength, and the others were cyclically loaded for the evaluation of the fatigue resistance until plastic deformation occurred. Nonparametric statistical analysis was performed for the results. Results. Mean plastic and maximum bending moment were $1,900{\pm}18Nmm,\;3,609{\pm}106Nmm$ for the 1-piece abutment, and $1,250{\pm}31Nmm,\;2,688{\pm}166Nmm$ for the 2-piece abutment, respectively. Mean cycles and standard deviation when implant-abutment joint showed a first plastic deformation were $238,610{\pm}44,891$. cycles for the 1-piece abutment and $9,476{\pm}3,541$ cycles for the 2-piece abutment. A 1-piece abutment showed significantly higher value than a 2-piece abutment in the first plastic bending moment (p<.05), maximum bending moment (p<.05) and fatigue strength (p<.05). Conclusion. Both 1-piece and 2-piece conical abutment had high strength and fatigue resistance and this suggests long-term durability without mechanical complication. However, the 1-piece conical abutment was more stable than the 2-piece conical abutment in the strength and the fatigue resistance.

• Molecules and Cells
• /
• 제39권4호
• /
• pp.352-357
• /
• 2016

Vertebrate neurogenesis requires inhibition of endogenous bone morphogenetic protein (BMP) signals in the ectoderm. Blocking of BMPs in animal cap explants causes the formation of anterior neural tissues as a default fate. To identify genes involved in the anterior neural specification, we analyzed gene expression profiles using a Xenopus Affymetrix Gene Chip after BMP-4 inhibition in animal cap explants. We found that the xCyp26c gene, encoding a retinoic acid (RA) degradation enzyme, was upregulated following inhibition of BMP signaling in early neuroectodermal cells. Whole-mount in situ hybridization analysis showed that xCyp26c expression started in the anterior region during the early neurula stage. Overexpression of xCyp26c weakly induced neural genes in animal cap explants. xCyp26c abolished the expression of all trans-/cis-RA-induced posterior genes, but not basic FGF-induced posterior genes. Depletion of xCyp26c by morpholino-oligonucleotides suppressed the normal formation of the axis and head, indicating that xCyp26c plays a critical role in the specification of anterior neural tissue in whole embryos. In animal cap explants, however, xCyp26c morpholinos did not alter anterior-to-posterior neural tissue formation. Together, these results suggest that xCyp26c plays a specific role in anterior-posterior (A-P) neural patterning of Xenopus embryos.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.372-380
• /
• 1999

The purpose of this study was to investigate the distribution of calcitonin gene-related peptide(CGRP) containing nerve fivers after pulp exposure in rats. The Spague-Dawley rats weighing about 250 - 300g were used. The animals were devided into normal control group and experimental groups. Experimental animals were sacrified on 2, 4, 7, 10 days after pulp exposure. The maxillary teeth and alveolar bone were removed and immersed in the 4% paraformaldehyde plus 0.1M phosphate buffer (pH 7.4). Serial frozen $50{\mu}m$ thick sections were cut with a cryostat. In the immunohistochemical staining procedure, the rabbit CGRP antibody was used as a primary antibody. The sections were incubated for 48 hours at $4^{\circ}C$, and placed into biotinylated anti-rabbit IgG as a secondary antibody and incubated in ABC (avidin-biotin complex), The sections were visualized by 0.05% 3.3 diaminobenzidine tetrahydrochloride. The results of this study were as follows: 1. In control group, CGRP containing nerve fibers ran parallel to the long axis of root and reached the coronal pulp. They were distributed on Raschkow plexus under the odontoblastic layer. 2. In 2 day group after pulp exposure, tissue necrosis and acute inflammation occurred and CGRP containing nerve fibers increased. In 4 day group, the necrotic tissue extended to the pulp and CGRP containing nerve fibers were distributed around the inflammation zone. 3. In 7 day group after pulp exposure, pulp necrosis occurred, and in 10 day group, the abscess under the necrotic pulp extended to the root apex area and CGRP containing nerve fibers were not observed in root canals. 4.The sprouting of CGRP nerve fibers was most remarkable at the pulp chamber under injury in 4 day group, and it was found at inflammation zone under the necrotic tissue in 7 day group and the remaining root pulp tissue in 10 day group. As mentioned above, CGRP nerve fibers had a tendency to increase around the inflammatory zone, especially around the acute inflammation tissue, when compared with control group. It is suggested that CGRP nerve fibers maybe related to the control of inflammatory response of pulp tissue.

• Journal of Korean Neurosurgical Society
• /
• 제64권4호
• /
• pp.575-584
• /
• 2021

Objective : Cervical expansive laminoplasty is an effective surgical method to address multilevel cervical spinal stenosis. During surgery, the spinous processes of C2 and C7 are usually preserved to keep the insertion points of the cervical musculature and nuchal ligament intact. In this regard, dome-like laminectomy (undercutting of C7 lamina) instead of laminoplasty is performed on C7 in selected cases. However, resection of the lamina can weaken the C7 lamina, and stress fractures may occur, but this complication has not been characterized in the literature. The objective of the present study was to investigate the incidence and risk factors for C7 laminar fracture after C7 dome-like laminectomy and its impact on clinical and radiological outcomes. Methods : Patients who underwent cervical open-door laminoplasty combined with C7 dome-like laminectomy (n=123) were classified according to the presence of C7 laminar fracture. Clinical parameters (neck/arm pain score and neck disability index) and radiologic parameters (C2-7 angle, C2-7 sagittal vertical axis, and C7-T1 angle) were compared between the groups preoperatively and at postoperatively at 3, 6, 12, and 24 months. Risk factors for complications were evaluated, and a formula estimating C7 fracture risk was suggested. Results : C7 lamina fracture occurred in 32/123 (26%) patients and occurred at the bilateral isthmus in 29 patients and at the spinolaminar junction in three patients. All fractures appeared on X-ray within 3 months postoperatively, but patients did not present any neurological deterioration. The fracture spontaneously healed in 27/32 (84%) patients at 1 year and in 29/32 (91%) at 2 years. During follow-up, clinical outcomes were not significantly different between the groups. However, patients with C7 fractures showed a more lordotic C2-7 angle and kyphotic C7-T1 angle than patients without C7 fractures. C7 fracture was significantly associated with the extent of bone removal. By incorporating significant factors, the probability of C7 laminar fracture could be assessed with the formula 'Risk score = 1.08 × depth (%) + 1.03 × length (%, of the posterior height of C7 vertebral body)', and a cut-off value of 167.9% demonstrated a sensitivity of 90.3% and a specificity of 65.1% (area under the curve, 0.81). Conclusion : C7 laminar fracture can occur after C7 dome-like laminectomy when a substantial amount of lamina is resected. Although C7 fractures may not cause deleterious clinical outcomes, they can lead to an unharmonized cervical curvature. The chance of C7 fracture should be discussed in the shared decision-making process.

• Journal of Animal Science and Technology
• /
• 제62권6호
• /
• pp.777-789
• /
• 2020

Intense artificial selection has been imposed to Luzhong mutton sheep population in the past years. Improvements on growth and reproductive performance are two breeding goals in the present herd. Although some progresses were phenotypically observed possibly due to inbreeding induced by strong selection in terms of these traits, the genomic evaluation was poorly understood. Therefore, a high-density SNP array was used to characterize the pattern of runs of homozygosity (ROH), estimate inbreeding and inbreeding depressions on early growth performance and litter size based upon ROH, and scan positive selection signatures of recent population. Consequently, a low inbreeding level was observed which had negative effects on litter size, but not on early growth performance. And 160 genes were under selection, of which some were reported to be linked to several traits of sheep including body weight, litter size, carcass and meat quality, milk yield and composition, fiber quality and health, and the top genes were associated with growth (growth hormone [GH]- growth hormone receptor [GHR]- Insulin-like growth factor 1 [IGF1] axis) and litter size (bone morphogenic proteins [BMPs]-associated). The effectiveness of previous breeding measures was highlighted, but purging selection was proposed to alleviate the inbreeding depression on litter size, providing some genomic insights to breeding management of Luzhong mutton sheep.

• International Journal of Stem Cells
• /
• 제16권2호
• /
• pp.180-190
• /
• 2023

Background and Objectives: Regenerative endodontic procedures (REPs) are a research hotspot in the endodontic field. One of the biggest problems of REPs is that it is difficult to realize regeneration of pulp-dentin complex and functional reconstruction. The reason is still not clear. We hypothesize that the migration may be different in different dental stem cells. Periodontal ligament stem cells (PDLSCs) may migrate faster than stem cells of apical papilla (SCAPs), differentiating into cementum-like tissue, bone-like tissue and periodontal ligament-like tissue and, finally affecting the outcomes of REPs. Hence, this study aimed to explore the mechanism that regulates the migration of PDLSCs. Methods and Results: After isolating and culturing PDLSCs and SCAPs from human third molars, we compared the migration of PDLSCs and SCAPs. Then we investigated the role of SDF-1𝛼-CXCR4/CXCR7 axis in PDLSC migration. We further investigated the impact of Porphyromonas gingivalis (P. gingivalis) lipopolysaccharide (LPS) on PDLSC migration and the potential mechanism. PDLSCs showed better migration under both noninflammatory and inflammatory conditions than SCAPs. SDF-1𝛼 can promote the migration of PDLSCs by elevating the expression of CXCR4 and CXCR7, increasing the interaction between them, promoting expression of 𝛽-arrestin1 and activating the ERK signaling pathway. P. gingivalis LPS can promote the migration of PDLSCs toward SDF-1𝛼 through increasing the expression of CXCR4 via the NF-𝜅B signaling pathway, promoting the expression of 𝛽-arrestin1, and activating the ERK signaling pathway. Conclusions: This study helped elucidate the potential reason for the difficulty in forming pulp-dentin complex.

• 대한치과교정학회지
• /
• 제27권6호
• /
• pp.963-978
• /
• 1997

교정 환자들은 성장과 발육을 하는 개체이므로 교정치료의 시기 선택은 가장 어렵고 중요한 요소이며, 측모두부방사선 사진의 개발에 따라 안면 성장의 양상과 연령 증가에 따른 성장 변화량은 성장 예측 등의 교정적 분야에 유용하게 이용되어왔다. 이에 3세에서 12세까지의 한국인 남여 아동 각 연령군에서의 두개 안면부의 경조직 계측치 평균과 신장, 체중과의 연관성을 파악하고자 하였다. 교정치료를 받은적이 없고, 성장과 발육에 장애가 없는 3세에서 12세까지의 소년 147명과 소녀 106명을 연구대상으로 만 2년간 두부방사선 사진을 채득하여 경조직 분석을 Burstone의 COGS논문에 기초하여 두개저, 상악골과 하악골, 수직 계측, 수평 계측, 상하악 기저골 관계 및 치성 계측의 6개 부분으로 나누어 성장과의 관계 및 키와 몸무게와의 관계를 연구한 바 다음과 같은 결론을 얻었다. 1. 두개저 계측에서 N-Ar(FH), N-Ba(FH)의 최대 성장 증가량은 남녀 모두 체중과 신장의 최대 증가량을 나타내는 연령과 일치한다. 그 외의 항목은 일정 증가 양상을 보이고 있으나 큰 증가를 보이지 않고 있어 두개저의 성장은 초기에 거의 완성됨을 알 수 있었다. 2. Genial angle은 남녀 모두에서 성장과 함께 점차 감소하였다. 3. ANS-Me(L)보다 N-ANS(L)가 더 많은 성장량을 보여 안면 형태에 많은 영향을 줌을 알 수 있었다. 4. $N-A-Pog^{\circ}$ 은 연령증가와 더불어 감소하며 이는 하악골의 성장이 상악골의 성장량보다 빠르고 많았다. 5. 상하악 기저골 관계에서 Y-axis의 길이는 증가하지만 각도는 일정하게 유지되어 하악골은 두개저에 대해 일정방향으로 성장하였다. 6. 영구치 맹출과 더불어 Interincisal angle은 감소하였다.

• 대한정형외과학회지
• /
• 제54권6호
• /
• pp.519-527
• /
• 2019

목적: 다발성 섬유성 이형성증에서 대퇴골두의 침범 부위 정도에 따라 분류하여 변형 정도를 분석하고 치료 경과에 대한 결과를 보고하고자 한다. 대상 및 방법: 1987년 3월부터 2014년 3월까지 전남대학교병원에 내원한 23명의 환자를 후향적 연구를 실시하였다. 대퇴골두 침범 부위에 따라 대퇴골두의 골단판 반흔 및 성장판을 침범하지 않은 Type I, 골단판 반흔 및 성장판을 침범한 Type II로 구분하였다. 단순방사선 촬영을 통해 대퇴경간각 및 비구-전자간 거리를 측정하였으며 측면사진을 통해 전방만곡을 측정하였다. 하지의 teleoroentgenogram을 통해 하지부동 및 하지 역학축의 변화를 측정하였다. 골스캔을 통해 하지병변의 위치와 변형을 확인하였다. 변형 교정 및 골절 치료를 위한 내고정술 전후의 대퇴경간각, 비구-전자간 거리를 비교하여 수술 후 교정의 소실 정도를 확인하였다. 결과: 총 23명(46하지) 중 23명(28하지)에서 근위 대퇴부에 병변이 있었다. Type I은 15/23명(16/28하지), Type II는 9/23명(12/28하지)이었다. 근위 대퇴골의 술 전 대퇴경간각은 Type I에서 116.8도, Type II에서 95.3도를 보였고, 비구-전자간 거리는 Type I에서 12.08 mm, Type II에서 -5.54 mm를 보여 Type II에서 의미 있게 변형이 심하였다. 수술 직후 변형 교정에 뚜렷한 호전을 보였으나 시간이 경과함에 따라 Type II의 경우 변형 교정이 소실됨을 보였다(대퇴경간각 Type I: 133.8-130.8도, Type II: 128.6-116.9도, 비구-전자간 거리 Type I: 17.66-15.72 mm, Type II: 7.44-4.16 mm). 전방 만곡은 Type I에서 평균 12.74도, Type II에서 평균 20.19도를 보였다. 실제 하지부동을 보인 총 9명에서 평균 12 mm 의 차이를 보였으며, 하지 역학축은 술 전을 기준으로 외측 편위 4하지, 내측 편위 7하지를 보였다. 결론: 다발성 섬유성 이형성증에서 대퇴골두를 침범한 경우 대퇴경간각 및 비구-전자간 거리, 대퇴골의 전방 만곡에서 훨씬 심한 변형을 보이고 수술 후 변형 교정의 소실 양상을 보여 병변의 대퇴골두 침범 여부가 환자의 예후에 중요한 인자임을 알 수 있었다. 내외반 변형뿐만 아니라 전방 만곡 등의 측면상의 변형 및 하지 역학축, 하지부동 등 전반적인 하지의 정렬을 고려해야 할 것으로 생각된다.

• Clinical and Experimental Pediatrics
• /
• 제49권5호
• /
• pp.552-557
• /
• 2006

목 적 : 최근 성조숙증에서 사춘기를 중단시킴으로써 성인신장을 증가시킬 수 있으리라는 기대로 조기 사춘기로 인하여 신장에 대한 예후가 불량한 소아에서 성선자극호르몬 방출호르몬 효능약제의 시도가 이루어졌다. 이에 저자들은 조기 사춘기로 예측 성인신장이 저하된 여아에서 이 약제의 신장 증가효과를 분석하고자 하였다. 방 법 : 소아과 외래에 조기 사춘기와 예측성인신장이 저신장으로 예측되는 36명의 여아를 대상으로 GnRHa를 6개월 이상 사용한 제 1군과 6개월 미만 사용한 제 2군으로 나누어 치료 시작시와 치료 후의 역연령, 골연령, 신장 및 표준편차치, 예측성 인신장 및 표준편차치, 표적키 및 표준편차치, 혈청 IGF-1, IGFBP-3 치를 비교하였다. 결 과 : 1군의 평균 치료기간은 $1.37{\pm}0.92$년, 2군은 $0.41{\pm}0.08$년이었고, 전체적으로는 $0.89{\pm}0.81$년이었다. 치료 시작시 두군 간에 역연령, 골연령, 신장, 표적키, 예측성인신장, 혈청 IGF-1 및 IGFBP-3 치의 차이는 없었고, 마지막 추적시 두 군간에 역연령, 골연령, 신장, 예측성인신장, 혈청 IGF-1 및 IGFBP-3치의 차이도 없었다. 두 군 사이에 성장속도와 치료기간에 따른 예측성인신장의 증가분은 2군이 의미 있게 높았다. 이는 2군이 치료기간이 짧아 사춘기의 성장속도가 충분히 억제되지 않은 결과로 보인다. 치료 시작시에 비하여 마지막 추적시의 예측성인신장은 의미 있게 증가하여 단기간의 치료에도 어느 정도의 효과($3.7{\pm}3.2cm$)는 있었다. 전체 대상아에서 표적키($157.3{\pm}3.1cm$)와 치료 시작시 예측성인신장($148.5{\pm}5.8cm$) 사이에는 의미있는 차이가 있었으며, 마지막 추적시의 예측성인신장($152.2{\pm}5.9cm$) 사이에도 의미 있는 차이가 있었다. 검사 소견에서 혈청 IGF-1과 IGFBP-3는 치료 시작시에 비하여 마지막 추적시에는 의미 있게 감소하여 GnRHa의 사용으로 성장호르몬-IGF 축이 다소간 억제되는 것으로 보인다. 결 론 : 사춘기가 조기에 시작하여 골연령이 역연령에 비하여 증가되어 예측성인신장이 표적키에 못 미치는 경우에 단기간의 GnRHa의 사용으로 예측성인신장은 다소 증가하였으나 표적키에는 미치지 못함을 알 수 있었으며, 성장호르몬-IGF 축의 억제가 동반되는 점에서 GnRHa 치료시 예측성인신장이 표적키에 이르기 위해서는 성장호르몬의 동시 사용이 필요하겠다.