• 응용통계연구
• /
• 제23권6호
• /
• pp.1125-1145
• /
• 2010

For modeling(skewed) semicircular data, we derive a new exponential family of distributions. We extend it to the l-axial exponential family of distributions by a projection for modeling any arc of arbitrary length. It is straightforward to generate samples from the l-axial exponential family of distributions. Asymptotic result reveals that the linear exponential family of distributions can be used to approximate the l-axial exponential family of distributions. Some trigonometric moments are also derived in closed forms. The maximum likelihood estimation is adopted to estimate model parameters. Some hypotheses tests and confidence intervals are also developed. The Kolmogorov-Smirnov test is adopted for a goodness of t test of the l-axial exponential family of distributions. Samples of orientations are used to demonstrate the proposed model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.214-219
• /
• 1997

We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600-1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with aims to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial mode laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, whlch allows us to perform multiple measurements of up to 10 machine axes simultaneously.

• Computers and Concrete
• /
• 제2권2호
• /
• pp.147-164
• /
• 2005

This paper summarizes an experimental study on the seismic behavior of lower stories of a mid-rise reinforced concrete frame building. Two reinforced concrete frames with two stories and one span were tested and each frame represents lower two stories of an 11-story RC frame building. Both frames were designed in accordance with Japanese design guidelines and were identical except in the variation of axial force. The tests demonstrated that the overall load-displacement relations of the two frames were nearly the same and the first-story column shear was closely related to the column axial load. The columns and beams elongated during both of the tests, with the second-floor beam elongation exceeding 1.5% of the beam clear span length. The frame with higher axial loads developed more cracks that the frame under moderate axial load.

• 한국패류학회지
• /
• 제26권1호
• /
• pp.33-43
• /
• 2010

The ultrastructure of germ cells during spermatogenesis and some characteristics of sperm morphology in male Mytilus coruscus, which was collected on the coastal waters of Gyeokpo in western Korea, were investigated by transmission electron microscope observations. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves in that it contains a short midpiece with five mitochondria surrounding the centrioles. The morphologies of the sperm nucleus type and the acrosome shape of this species have an oval and modified cone shape, respectively. In particular, the axial rod is observed between the nucleus and acrosome of the sperm. The spermatozoon is approximately $45-50{\mu}m$ in length including a sperm nucleus (about $1.46{\mu}m$ in length), an acrosome (about $3.94{\mu}m$ in length) and tail flagellum (approximately $40-45{\mu}m$). The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure. Some special charateristics of sperm morphology of this species in the genus Mytilus are (1) acrosomal morphology, (2) the number of mitochondria in the midpiece of the sperm, and (3) the existence of a satellite. The axial rod appears in the acrosome and sperm nucleus as one of the characteristics seen in several species of the subclass Pteriomorphia, unlikely the subclass Heterodonta containing axial filament instead of the axial rod. The number of mitochondria in the midpiece of the sperm of this species in the family Mytilidae are five, as one of common characteristics appeared in most species in the family Mytilidae. Most of Mytilus species contain a satellite body which is attached to the proximal centriole in the middle piece of the sperm, as one of common characteristics of sperm morphology in the family Mytilidae.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.397-403
• /
• 2000

In the present study, flow characteristics of turbulent pulsating flow in a square-sectional $180^{\circ}$ curved duct were experimentally investigated. Experimental studies for air flows were conducted to measure axial velocity and wall shear stress distributions and entrance length in a square-sectional $180^{\circ}$ curved duct by using the LDV with the data acquisition and the processing system. The experiment was conducted in seven sections from the inlet (${\phi}=0^{\circ}$) to the outlet (${\phi}=180^{\circ}$) at $30^{\circ}$ intervals of the duct. The results obtained from the experimentation were summarized as follows ; (1) When the ratio of velocity amplitude ($A_1$) was less than one, there was hardly any velocity change in the section except near the wall and any change in axial velocity distributions along the phase. When the ratio of velocity amplitude ($A_1$) was 0.6, the change rate of velocity was slow. (2) Wall shear stress distributions of turbulent pulsating flow were similar to those of turbulent steady flow. The value of the wall shear stress became minimum in the inner wall aid gradually increased toward the outer wall where it became maximum. (3) The entrance length of turbulent pulsating flow reached near the region of bend angle of $90^{\circ}$, like that of turbulent steady flow. The entrance length was changed by the dimensionless angular frequency (${\omega}^+$).

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.69-77
• /
• 2005

KSR-III 개발과정에서 배플을 장착하여 연소 불안정 현상을 해결한 바 있으나, 추력 및 냉각과 관련된 축방향 길이에 대한 최적화 과정을 거치지는 않았다. 이에 수동제어기구로서 사용되는 배플의 축방향 길이의 최적화 및 한계를 평가하기 위하여, 축방향 길이를 작동인자로 하여 연소 안정성 여분을 평가하였다. 외부 교란 발생 장치로서 2번의 기폭이 가능한 펄스건을 사용하였다. 외부 교란에 대한 연소실에서의 응답 특성을, 감쇠 시간과 진폭비와 같은 인자를 도입하여 정량화하였다. 설계점과 탈설계점에서 시험을 수행하였으며, 분사기의 충돌점으로 생각할 수 있는 화염 영역을 감싸지 못하는 경우에는 배플의 충분한 감쇠 능력을 보장할 수 없음을 확인하였다. 따라서 연소 안정성의 여분의 경계는 KSR-III에서의 작동조건 하에서 50 mm 정도의 배플인 것으로 판단되었다.

• Computers and Concrete
• /
• 제25권5호
• /
• pp.411-425
• /
• 2020

In this paper, the shell material has been taken as functionally graded material and their material quantity is located by the exponential volume fraction law. Moreover, the impact of ring supports around the shell circumference has been examined for their various positions along the shell axial length. These rings support restraints the radial displacement in the transverse direction. While the axial modal deformation functions have been estimated by characteristic beam functions and nature of materials used for construction of cylindrical shells. The fundamental natural frequency of cylindrical shell of parameter versus ratios of length- and height-to-radius for a wide range has been reported and investigated through the study. In addition, by increasing height-to-radius ratio resulting frequencies also increase and frequencies decrease on ratio of length-to-radius. Though the trends of frequency values of both ratios are converse to each other with three different boundary conditions. Also it is examined the position of ring supports with length-to radius ratio, height-to-radius ratio and varying the exponent of volume fraction. MATLAB software package has been utilized for extracting shell frequency spectra. The obtained results are confirmed by comparing with available literature.

• 오토저널
• /
• 제15권2호
• /
• pp.92-104
• /
• 1993

In the present study, the velocity profiles and entrance length of developing transitional pulsating flows are investigated both analytically and experimentally in the entrance region of a square duct. The systems of conservation equations for transitional pulsating flows in a square duct are solved analytically by linearizing the non-linear convective terms. Analytical solutions are obtained in the form of infinite series for velocity pofiles. The experimental study for the air flow in a square duct(40mm*40mm*4000mm) is carried out to measure velocity profiles and other parameters by using a hot-wire anemometer with a data acquisition and processing system. The distribution of velocity profiles( $u_{ps}$ / $u_{m,ta}$) in the decelerating period is higher than in the accelerating period. The distribution of the axial component of the axial component of velocity in the transitional flow is nearly uniform in the central region of the duct, and decrease rapidly near the wall. The entrance length correlation of the transitional pulsating flows in a square duct is obtained to be $L_{e}$/ $D_{h}$=0.83 $A_{1}$R $e_{ta}$ /(.omega. sup+1)$^{2}$TEX>

• Geomechanics and Engineering
• /
• 제11권6호
• /
• pp.787-803
• /
• 2016

DDARF (Discontinuous Deformation Analysis for Rock Failure) is a numerical algorithm for simulating jointed rock masses' discontinuous deformation. While its reinforcement simulation is only limited to end-anchorage bolt, which is assumed to be a linear spring simply. Here, several new reinforcement modes in DDARF are proposed, including lining reinforcement, full-length anchorage bolt and equivalent reinforcement. In the numerical simulation, lining part is assigned higher mechanical strength than surrounding rock masses, it may include multiple virtual joints or not, depending on projects. There must be no embedding or stretching between lining blocks and surrounding blocks. To realize simulation of the full-length anchorage bolt, at every discontinuity passed through the bolt, a set of normal and tangential spring needs to be added along the bolt's axial and tangential direction. Thus, bolt's axial force, shearing force and full-length anchorage effect are all realized synchronously. And, failure criterions of anchorage effect are established for different failure modes. In the meantime, from the perspective of improving surrounding rock masses' overall strength, a new equivalent and tentative simulation method is proposed, it can save calculation storage and improve efficiency. Along the text, simulation algorithms and applications of these new reinforcement modes in DDARF are given.

• 디지털융복합연구
• /
• 제14권11호
• /
• pp.435-440
• /
• 2016

양안 굴절이상 차이에 의한 안광학상수 변화도 분석을 통한 양안 굴절이상 차이의 특성을 이해 할 수 있는 기초자료를 제공하고자 하였다. 20-59세의 건강한 성인 100명을 대상으로 KR-8800을 이용하여 등가구면 굴절력과 각막곡률 반경을, IOL Master를 사용하여 안축장길이와 전방깊이를 측정하였으며, 측정값의 차이는 우안 측정값-좌안 측정값의 차이값에 절대 값을 구하여 사용하였다. 전체 대상자의 등가구면 굴절력은 $-1.83{\pm}2.17D$이고, 안축장길이는 23.00~24.99mm, 각막곡률반경은 7.50~7.89mm, 전방깊이는 3.60~4.09mm의 범위에서 가장 많았다. 양안 등가구면 굴절력 차이에 따른 양안 안축장길이 차이와 양안 전방깊이의 차이가 유의한 상관관계가 있었다. 또한, 양안 굴절력 차이에 의한 양안 안축장 길이 차이가 가장 크고, 가장 높은 상관성이 있었다. 양안 굴절력 차이는 안광학 상수와 밀접한 관계가 있고, 양안 굴절력 차이에 의하여 여러 가지 시기능 문제가 발생 할 수 있으므로, 양안 굴절이상 차이에 따른 요인별 분류를 통한 융복합 연구가 필요하다.