• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.99-105
• /
• 2002

본 연구에서는 정익과 동익간의 축방향 간격을 달리하여 축류형 터빈에서의 성능시험을 수행하였다. 실험에 사용된 터빈은 저압저속터빈으로써 평균반경에서 반동도가 0.373이며 축류형 3차원 단단터빈이다. 터빈의 평균반경 직경은 257.56mm이며 평균반경에서 동익의 익현은 28.2mm이다. 성능시험을 위한 공기력 입력장치로는 풍동이 사용되었으며 풍동의 터보블로워 동력은 30kW로써 290mmAq의 정압력에서 $340m^3$/min의 공기량을 보낼 수 있다. 터빈에서의 회전수 및 출력은 터빈 축에 직결식으로 연결된 다이나모메터에서 제어되었다. 실험에서 축방향 간격조정은 평균반경에서의 정익 축방향 익현의 1/4에서 3배까지 변경하여 총 9개의 성능시험을 수행하였다. 같은 무차원 유량과 RPM에서 축방향의 간격에 따른 효율의 변화는 최대 8%이내지만 최고효율을 얻게되는 축방향 간격은 1.6-1.9Cx 였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.735-745
• /
• 2004

A linear cascade of NACA 65-1810 profiles are investigated for tip leakage flow characteristics. and calculation results are compared with experimental result. STAR-CD commercial code was used to solve the three dimensional incompressible Navier-Stokes equation that was adopted for steady flow and high Reynolds $\kappa$- $\varepsilon$turbulent model. Numerical calculation of a linear cascade is carried out to investigate effect of tip clearance on pitchwise variations of velocity Profiles. and static pressure distributions on the blade surface at spanwise positions. In case of evolution of tip vortex core location. tip vortex geometry and static pressure at the center of the tip vortex core compared with experimental results. Calculation results are agreed well with the experimental data, and validated. The static pressure losses by tip leakage flow at 2% tip clearance were more than those at 1% tip clearance.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1518-1526
• /
• 2001

In this paper, the mechanism of unsteady potential interaction and wake interaction in one stage axial turbine is numerically investigated at design point in two-dimensional viewpoint. The numerical technique used is the upwind scheme of Van-Leer's Flux Vector Splitting (FVS) and Cubic spline interpolation is applied on zonal interface between stator and rotor. The inviscid analysis is used to embody the influence of potential interaction only and viscous analysis is used to embody the influences of both potential interaction and wake interaction at the same time. The potential-flow disturbance from the stator into a rotor passage and the periodic blockage effect of rotor produce the unsteady pressure on the blade surface in inviscid analysis. After the wake is cut by rotor, two counterrotating votical patterns flanking the wake centerline in the passage are generated. So, these phenomena magnify the unsteady pressure in viscous analysis than that in inviscid analysis. The resulting unsteady forces on the rotor, generated by the combined interaction of the two effects by potential and wake interaction, are discussed.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.571-580
• /
• 2015

In this paper, a computational study was conducted in order to investigate the rotor blade sweep effect on the aerodynamics of a small axial supersonic impulse turbine stage. For this purpose, three-dimensional unsteady RANS simulations have been performed with three different rotor blade sweep angles ($-15^{\circ}$, $0^{\circ}$, $+15^{\circ}$) and the results were compared with each other. Both NTG (No tip gap) and WTG (With tip gap) models were applied to examine the effect on tip leakage flow. As a result of the simulation, the positive sweep model ($+15^{\circ}$) showed better performance in relative flow angle, Mach number distribution, entropy rise, and tip leakage mass flow rate compared with no sweep model. With the blade static pressure distribution result, the positive sweep model showed that hub and tip loading was increased and midspan loading was reduced compared with no sweep model while the negative sweep model ($-15^{\circ}$) showed the opposite result. The positive sweep model also showed a good aerodynamic performance around the hub region compared with other models. Overall, the positive sweep angle enhanced the turbine efficiency.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2561-2571
• /
• 1996

The flow in the turbomachinery is very unsteady due to the stator-rotor interaction. It has been indicated that the stator-rotor interaction has three distinct causes of unsteadiness: that is, the viscous vortex shedding, wake rotor interaction and potential stator-rotor interaction. In this paper, the mechanism of unsteady potential interaction and wake interaction in the stator-rotor stage flow is numerically investigated in two-dimensional view point. The numerical technique used is the upwind scheme of Van Leer's Flux Vector Splitting(FVS) and cubic spline interpolation is applied on zonal interface. Then, the flow field of a compressor stage composed of NACA 65410 is analyzed. Flow fields are found to be simulated reasonably by this method and the sensitivity due to back-pressure variation is more stronger than rotor-velocity variation.

• 한국유체기계학회 논문집
• /
• 제10권2호
• /
• pp.22-31
• /
• 2007

This paper describes the shape optimization of rotor blade in a transonic axial compressor rotor. Three surrogate models, Kriging, radial basis neural network and response surface methods, are introduced to find optimum blade shape and to compare the characteristics of object function at each optimal design condition. Blade sweep, lean and skew are considered as design variables and adiabatic efficiency is selected as an objective function. Throughout the shape optimization of the compressor rotor, the predicted adiabatic efficiency has almost same value for three surrogate models. Among the three design variables, a blade sweep is the most sensitive on the object function. It is noted that the blade swept to backward and skewed to the blade pressure side is more effective to increase the adiabatic efficiency in the axial compressor Flow characteristics of an optimum blade are also compared with the results of reference blade.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.977-980
• /
• 2011

본 논문에서는 항공우주연구원에서 개발중인 1단 저압 축류압축기 성능시험리그의 개발에 대한 내용을 소개하고자 한다. 성능시험리그는 유동 입구부, 동익단, 정익단, 축, 리그 하우징, 베어링 하우징 및 유동 출구부로 구성되어 있다. 로터와 회전축을 단순화하여 회전동역학 해석 결과를 바탕으로 회전축을 설계하고 입 출구 유로의 유동해석을 통해서 시험리그 형상설계를 최적화하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.525-532
• /
• 2005

Shape optimization of a transonic axial compressor rotor operating at the design flow condition has been performed using response surface method and three-dimensional Navier-Stokes analysis. Three design variables of blade sweep. lean and skew are introduced to optimize the three-dimensional stacking line of the rotor blade. The object function of the shape optimization is selected as an adiabatic efficiency. Throughout the shape optimization of the rotor. the adiabatic efficiency is increased by reducing the tub comer and tip losses. Separation line due to the interference between a passage shock and surface boundary layer on the blade suction surface is moved downstream for the optimized blade compared to the reference one.

• 한국해안·해양공학회논문집
• /
• 제32권1호
• /
• pp.48-54
• /
• 2020

로터 위치 및 쉬라우드 입구 유속 변화에 따른 쉬라우드 내부 유동장 및 기계적 출력 분석을 위해 수치해석을 수행하였고 이를 실험결과와 비교하였다. 로터와 해수의 유동조건은 쉬라우드 조류발전 시스템 내 유동장 특성에 많은 영향을 미치게 된다. 특히 실린더 내 축 방향 위치에 따른 로터의 기계적 출력은 실린더 중앙 이후까지 점차 증가하며, 입·출구 부근에서는 감소하였다. 또한 쉬라우드 입구 유속이 증가함에 따라 로터 출력량이 점차 증가하였다. 축 방향 운동량과 각운동량은 로터를 통과하면서 급격하게 증가 및 감소하였으며, 전방을 포함한 그 외 영역에서의 큰 변화는 없었다. 이러한 결과들은 조류발전 시스템 개발의 기초 자료로 다양하게 활용될 수 있을 것으로 기대된다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.318-323
• /
• 2005

To evaluate the accurate performance of turbomachinery, it is important to measure the unsteady flow phenomena downstream of the rotor blade. This paper presents the development of the fast-response total pressure probe for the measurement of the total pressure field at the exit of rotor and the result of measurement in a 1-stage axial turbine. The fast-response total pressure probe was fabricated by installing a fast-response pressure sensor near the head of a Kiel probe. And it measured the phase-lock averaged total pressure downstream of an 1-stage axial turbine. The developed probe successfully measured the accurate total pressure distribution at rotor exit and made possible to evaluate the loss distribution and the accurate performance of turbomachinery.