• 한국추진공학회지
• /
• 제25권5호
• /
• pp.18-26
• /
• 2021

본 연구에서는 실험실 규모의 산업용 가스터빈 싱글노즐 연소기에서의 공진주파수 해석을 위한 고유값 도출을 목적으로 하는 1D 네트워크 모델을 개발하였다. 현대의 산업용 가스터빈은 다양한 요구 조건을 동시에 만족시키기 위하여 일반적으로 매우 복잡한 구조와 유동의 형태를 가지고 있다. 이러한 복잡한 연소기 특징 중 하나인 동일한 축 방향 위치에서 서로 반대 방향의 유동 흐름을 갖는 시스템에서의 네트워크 모델 구현을 목적으로 하였다. 네트워크 모델을 통해 음향장을 해석한 결과를 실제 형상을 그대로 해석한 헬름홀츠 기반의 모델링 결과와 비교하였을 때, 공진주파수와 모드 분포로부터 해석의 타당성을 검증하였다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3631-3640
• /
• 2022

Uranium mill tailing ponds (UMTPs) are risk source of debris flow and a critical source of environmental U and Rn pollution. The technology of microbial induced calcium carbonate precipitation (MICP) has been extensively studied on reinforcement of UMTs, while little attention has been paid to the effects of MICP on U & Rn release, especially when incorporation of metakaolin and bacillus subtilis (MBS). In this study, the reinforcement and U & Rn immobilization role of MBS -MICP solidification in different grouting cycle for uranium mill tailings (UMTs) was comprehensively investigated. The results showed that under the action of about 166.7 g/L metakaolin and ~50% bacillus subtilis, the solidification cycle of MICP was shortened by 50%, the solidified bodies became brittle, and the axial stress increased by up to 7.9%, and U immobilization rates and Rn exhalation rates decrease by 12.6% and 0.8%, respectively. Therefore, the incorporation of MBS can enhance the triaxial compressive strength and improve the immobilization capacity of U and Rn of the UMTs bodies solidified during MICP, due to the reduction of pore volume and surface area, the formation of more crystals general gypsum and gismondine, as well as the enhancing of coprecipitation and encapsulation capacity.

• Wind and Structures
• /
• 제34권2호
• /
• pp.215-230
• /
• 2022

Majority of transmission line system failures at many locations worldwide have been caused by severe localized wind events in the form of tornadoes and downbursts. This study evaluates the structural response of two different transmission line systems under equivalent F2 tornadoes obtained from real incidents. Two multi-span self-supported transmission line systems are considered in the study. Nonlinear three-dimensional finite element models are developed for both systems. The finite element models simulate six spans and five towers. Computational Fluid Dynamics (CFD) simulations are used to develop the tornado wind fields. Using a proper scaling method for geometry and velocity, full-scale tornado flow fields for the Stockton, KS, 2005 and Goshen County WY, 2009 are developed and considered together with a previously developed tornado wind field. The tornado wind profiles are obtained in terms of tangential, radial, and axial velocities. The simulated tornadoes are then normalized to the maximum velocity value for F2 tornadoes in order to compare the effect of different tornadoes having an equal magnitude. The tornado wind fields are incorporated into a three-dimensional finite element model. By varying the location of the tornado relative to the transmission line systems, base shears of the tower of interest and peak internal forces in the tower members are evaluated. Sensitivity analysis is conducted to assess the variation of the structural behaviour of the studied transmission lines associated with the location of the tornado relative to the tower of interest. The tornado-induced forces in both lines due to the three different normalized tornadoes are compared with corresponding values evaluated using the simplified load case method recently incorporated in the ASCE-74 (2020) guidelines, which was previously developed based on the research conducted at Western University.

• 설비공학논문집
• /
• 제23권6호
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Journal of Chest Surgery
• /
• 제37권1호
• /
• pp.11-18
• /
• 2004

배경: 태아심장수술이 가능하려면 심폐우회술 시 태반혈류의 유지가 가장 중요하다. 태반 혈관의 수축으로 인한 혈류 감소는 태아에 심한 저산소성 손상을 초래한다. 본 연구에서는 태반혈관 수축 억제를 위한 인도메타신과 완전 척추 마취가 태반 혈류에 미치는 영향을 테스트하였다. 대상 및 방법: 제태기간 120∼150일 되는 20마리의 태아양을 정중흉골절개하에 주폐동맥과 우심방에 각각 12 G, 14∼18 F 크기의 도관을 삽관하여 30분 동안 심폐우회술을 시행하였다 어미양은 케타민 정주를 이용한 전신마취를 시행하였고 태아양에 대하여는 근육이완제만을 사용하였다. 심페우회술은 바이오펌프(Bio-pump, Bio-Medicus 회사제, 미국)와 태반을 산화기로 이용하여 시행하였다. 대조군은 태반을 산화기로 사용하여 체외순환만을 시행하였고(10마리), 실험군은 완전 척추 마취와 인도메타신을 전처치한 후 같은 방법으로 체외순환을 시행하였다 시간 경과에 따른 태아혈역학 및 동맥혈가스소견, 태반혈류 변화를 측정하였다. 결과: 태아양의 평균체중은 3.5 $\pm$ 1.3 (2.2 ∼ 5.2) kg이었다. 대조군에서는 심폐우회 시작 직후 평균 44.7 mmHg에서 14.4 mmHg로 급격한 혈압 강하가 관찰되었고 이때 측정한 혈류는 74.3∼97.0 $m\ell$/kg/min 였다. 동맥혈 가스 소견 역시 동맥혈 이산화탄소분압치가 61.9∼129.6 mmHg이었으며 체외순환 정지 후에는 심실세동으로 혈역학 측정이 불가능하였다. 실험군에서는 심폐우회 시작 직후 혈압이 30∼45.8 mmHg로 의미있게 높게 유지되었다. 태반 혈류는 78.8∼120.2 $m\ell$/kg/min로 대조군보다 높았다. 같은 시간대에 측정한 동맥혈 이산화탄소 분압치는 평균 59.1∼92.3 mmHg였으며 체외순환 정지 후에는 대조군보다 덜 급격하게 심기능 저하를 보여 평균동맥압이 27.3 mmHg였다. 결론: 연구자 등은 본 연구를 통하여, 30분간 심폐우회술을 실시하면서 인도메타신 전처치와 완전 척추 마취군에서 의미있는 태반혈류개선을 관찰하였으나 임상적용이 가능한 태반혈류의 유지에는 어려움을 겪었다. 향후 태아심폐우회술과 관련된 기술적인 측면에서의 개선, 인도메타신 용량의 조절, 순환회로의 최소화, 체외순환을 위한 우회펌프의 개선 등 태아 체외순환의 수정에 관한 지속적인 연구가 요구된다.

• Restorative Dentistry and Endodontics
• /
• 제34권2호
• /
• pp.145-153
• /
• 2009

본 연구에서는 측정장치의 compliance유무가 복합레진의 중합수축응력 측정에 미치는 영향을 알아보았다. 변위센서, cantilever load cell과 부궤환 (negative feedback) 시스템을 적용하여 compliance를 허용하는 것과 허용하지 않는 두 가지 모드로 중합수축응력의 측정이 가능한 stress-strain analyzer를 제작하였다. 한 종의 flowable (Filtek Flow: FF) 복합레진과 두 종의 universal hybrid (Z100: Z1 and Z250: Z2) 복합레진이 사용되었다. Load cell의 끝과 base plate에 고정된 직경 3.0 mm의 금속 막대에 silane을 처리하였다. 1.0 mm의 거리로 고정한 두 개의 금속 막대 사이 에 복합레진을 적용한 후 광중합을 하였다. 복합레진의 수직 중합수축률과 중합수축응력을 10 분 동안 기록하였고 인장탄성계수도 구하였다. 통계처리는 일원분산분석과 paired t-test를 시행하였고 95% 유의수준에서 Tukey's test로 사후 검정하였다. 측정된 중합수축 응력은 재료와 compliance의 유무에 따라 큰 차이를 보였다. Compliance를 허용한 모드에서 중합수축응력은 FF: 3.11 (0.13)이 가장 컸으며 Z1: 2.91 (0.10), Z2: 1.94 (0.09) Mpa의 순서였다. 측정장치의 compliance를 허용하지 않은 경우에는 Z1 17.08 (0.89)이 가장 컸고 FF: 10.11 (0.29), Z2: 9.46 (1.63) MPa의 순이었다. 또한 Z1, Z2, FF의 인장탄성계수는 각각 2.31 (0.18), 2.05 (0.20), 1.41 (0.11) GPa 이었다. 중합수축응력은 compliance mode에서는 복합레진의 수직 중합수축률이 주요 영향 요인이었으며, compliance를 배제한 모드에서는 탄성계수의 효과가 지배적이었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.1-13
• /
• 2010

A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권4호
• /
• pp.274-281
• /
• 2015

국내 연안에 위치해 있는 화력 및 원자력 발전소는 발전시설 냉각을 위해 해수를 사용한다. 입구를 통해 배출되는 온배수는 유량이 상당하여 입구 근처에 큰 운동에너지가 존재한다. 이러한 제한된 입구에서 빠른 흐름이 존재하는 제트류 영역에 설치된 수직축 터빈의 성능을 수치적으로 조사하였다. 제트류 영역에서 입구와 터빈간 거리, 입구 직경과 수직축 터빈의 직경에 따른 성능 변화를 TSR=3.0에서 조사하였다. 또한, 입구가 1개인 경우와 2개인 경우에 대해 직경이 다른 터빈을 배치하여 성능 및 발전량을 비교하였다. 입구가 1개인 경우 입구로부터 터빈과의 거리가 증가함에 따라 터빈 효율이 감소함을 알 수 있었고, 터빈 직경과 입구 직경이 동일할 때 효율이 가장 좋은 것을 알 수 있었다. 입구가 2개인 경우는 효율 및 총 발전량을 고려하여 입구와 동일한 크기의 터빈을 각각 배치하는 것이 좋은 것을 확인하였다. 본 연구는 방수로 입구 전방에 설치된 수직축 터빈을 개념적으로 설계하는데 활용될 수 있을 것으로 기대된다.

• 대한조선학회논문집
• /
• 제34권4호
• /
• pp.31-41
• /
• 1997

본 논문에서는 물분사추진기의 성능해석을 위하여 포텐셜을 기저로 한 패널법을 정립하였다. 문제를 수치적으로 표현하기 위하여 임펠러와 고정날개의 날개표면, 그리고 허브와 덕트표변에 법선 다이폴과 쏘오스를 분포하였으며 임펠러와 고정날개에서 방출되는 후연반류면에는 법선다이폴을 분포하였다. 경계면 닫힘조건을 만족하기 위하여 덕트의 입구면과 출구면에는 다이폴과 쏘오스를 분포하였으며, 운동학적 경계조건을 만족하기 위하여 경계면에서의 법선방향의 속도가 영이라는 비침투 조건을 사용하였다. 입구면에서의 전유량이 주어지면 연속방정식을 만족하도록 출구면에서의 쏘오스의 세기가 결정된다. 물체표면을 사각형외 패널로 이산화 하였으며, 적분방정식에 경계조건을 적용함으로써 주어진 형상에 대하여 유일한 해를 구할 수 있다. 체계적인 수치시험을 통하여 본 연구에서 개발한 수치해석방법이 안정적임을 확인하였고 프로그램의 검증을 위하여 물분사 추진기와 유사한 축류송풍기의 형상에 대하여 수치검증을 하였다. 또한, 실제적인 적용을 위하여 선박해양공학센터(KRISO)에서 실험한 물분사추진장치의 실험결과와 비교, 도시 하였다.

• 한국농공학회지
• /
• 제16권4호
• /
• pp.3600-3610
• /
• 1974

Experimental work of batch-type dryer was conducted to develop its optimurm operating conditions by analyzing the major factors which affect the drying performance. A laboratory batch-type dryer was constructed and tested for various levels of heated-air rates, and depths of grain deposit. Tong-il rice variety having the initial moisture content of approximaely 23 per cent in wet basis was used for the experiment. The criteria selected for establishing the optimum operating condition were the drying performance rate, the thermal efficiency, and the operational cost of the dryer. The results of the study are summarized as follows: 1. The performance rate of dryer for a specific operating condition was defined as total amount of material dried per hour when the moisture content of grains in the upperlayer reaches to 16 per cent in wet basis. The optimum operating conditions as viewed in the rate of drying performance could be justified by functional realtionship between the depth of grain deposit and air flow rate. In other words, there was a definite depth of grain deposit for a given air-rate which make the dryer performance maximum. The optimum grain depth for the batch-type dryer with 3.3㎡ loading area and with the attached axial fan was about 35cm. 2. The thermal efficiency for the dryer was evaluated by the ratio of the latent heat required to evaporate the grain moisture to the heat input required to raise the ambient air-temperature to 40 degree centigrade. The optimum operating condition as viewed in term of thermal efficiency analyzed was that grater depth and lower air flow-rate may be desirable. This condition is contracted with the optimum condition as viewed by the dryer performance rate. 3. The annual operating cost of batch-type dryer was analyzed for different annual hour of use and for different operation condition. The optimum condition as viewed in terms of operating cost was almost identical to one as viewed in terms of dryer performance rate. Therefore, the most economical use of batch-type dryer for the same annual operating hours can be obtained when the dryer operated in the condition of maximum dryer performance rate. Increasing the annual operating hour may be desirable to cut down the dryer operation cost, since the annual hour of dryer use is much sensitive to the operating cost than any peractical conditions of dryer operation. 4. The most desirable operational condition as justified by combining all the criteria, dryer performance rate, thermal efficiency and annual operating cost, could be concluded to operate the dryer in the condition of maximum performance rate. The condition in general is identical to the lowest operation cost for a given annual operating hour.