• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.231-240
• /
• 2007

This paper presents an advanced modeling and simulation technique applied to DC/DC power electronic converters fed through renewable energy power sources. The distributed generation (DG) system at the Illinois Institute of Technology, which employs a phase-l system consisting of a photovoltaic-based power system and a phase-2 system consisting of a fuel cell based primary power source, is studied. The modeling and simulation of the DG system is done using the generalized state space averaging (GSSA) method. Furthermore, the paper compares the results achieved upon simulation of the specific GSSA models with those of popular computer aided design software simulations performed on the same system. Finally, the GSSA and CAD software simulation results are accompanied with test results achieved via experimentation on both, the PV-based phase-l system and the fuel cell based phase-2 power system.

• 대한원격탐사학회지
• /
• 제24권1호
• /
• pp.17-24
• /
• 2008

Rainfall data from three different types of rain gauge system have been collected for the summertime rain event at Mokpo in the Korean peninsula. The rain gauge system considered in this paper is composed of three tipping-bucket rain gauges with 0.1, 0.2, and 0.5 mm measuring resolutions, the Optical Rain Gauge (ORG), and the PARSIVEL (PARticle SIze and VELocity). The PARSIVEL rainfall rate has been considered as the reference for comparison since it gave good resolution and performance on this event. Comparison with the PARSIVEL rainfall rate gives the results that the error and temporal variation of rainfall rate are simultaneously reduced with increasing the averaging interval of rainfall rate or decreasing the size of tipping bucket. This suggests that the estimated rainfall rate must be optimized, differently for the type of tipping-bucket rain gages, by minimizing the averaging interval of rainfall rate under the condition satisfying the given performance of rainfall rate.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.347-357
• /
• 2023

United States Nuclear Regulatory Commission (U.S. NRC) specifies regulations on obtaining licenses and describes the technical position on the average waste concentration, also known as Concentration Averaging and Encapsulation Branch Technical Position (CA BTP); CA BTP helps classify blendable waste and discrete items and address concentration averaging. The technical position details are reviewed and compared in a real environment in Korea. A few cases of concentration averaging based on the application of CA BTP to domestic radioactive waste are presented, and the feasibility of the application is assessed. The radioactive waste considered herein does not satisfy the Disposal Concentration Limit (DCL) of the second-phase disposal facility while applying the preliminary classification. However, if CA BTP is applied when the radioactive waste is mixed with other radioactive waste items in a large and heavy container, it can be disposed of at the second-phase disposal facility in Gyeongju Repository. To apply the CA BTP of the U.S. NRC, it is necessary to investigate the safety assessment conditions of the US and Korea.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.171-180
• /
• 2017

The purpose of this study is to install a system that compensated for the respiration motion using an articulated robotic manipulator couch which enables a wide range of motions that a Stewart platform cannot provide and to evaluate the performance of various prediction algorithms including proposed algorithm. For that purpose, we built a miniature couch tracking system comprising an articulated robotic manipulator, 3D optical tracking system, a phantom that mimicked respiratory motion, and control software. We performed simulations and experiments using respiratory data of 12 patients to investigate the feasibility of the system and various prediction algorithms, namely linear extrapolation (LE) and double exponential smoothing (ES2) with averaging methods. We confirmed that prediction algorithms worked well during simulation and experiment, with the ES2-averaging algorithm showing the best results. The simulation study showed 43% average and 49% maximum improvement ratios with the ES2-averaging algorithm, and the experimental study with the $QUASAR^{TM}$ phantom showed 51% average and 56% maximum improvement ratios with this algorithm. Our results suggest that the articulated robotic manipulator couch system with the ES2-averaging prediction algorithm can be widely used in the field of radiation therapy, providing a highly efficient and utilizable technology that can enhance the therapeutic effect and improve safety through a noninvasive approach.

• 한국수소및신에너지학회논문집
• /
• 제29권4호
• /
• pp.401-409
• /
• 2018

A numerical investigation has been conducted to find the effects of pressure losses by struts and rakes, and averaging methods on the performance of a multi-stage axial fan and a multi-stage axial compressor. Struts and rakes which produce pressure losses are installed upstream of the aerodynamic inlet plane in the fan and the compressor rigs. Some of normal stator vanes are substituted with thick vanes with total pressure probes to measure total pressure between stages. Three-dimensional Reynolds-averaged Navier- Stokes equations with $k-{\omega}$ SST turbulence model were applied to analyze the pressure losses by the struts, inlet rakes, and thick instrumented vanes. The hexahedral grids were used to construct computational domain. Inlet pressure losses were evaluated for the compressor as a function of Mach number. The passage pressure losses due to the instrumented vanes were evaluated at the two speed lines in the fan. Total properties, such as pressure and temperature, were evaluated at the exit of the fan and the compressor with two different averaging methods which are area-averaging and mass-averaging, respectively.

• 전자공학회논문지
• /
• 제54권3호
• /
• pp.63-69
• /
• 2017

NNPS(normalized noise power spectrum)는 획득한 x선 영상에서 평판형 방사선 디텍터의 잡음 특성을 spectrum을 관찰하기 위해 측정한다. 그러나 NNPS 측정은 획득한 영상에 따라 일관적이지 못한 성질을 가지고 있어서 안정된 측정이 필요하다. 디텍터의 NNPS 측정은 표본 periodogram을 구하여 평균을 내는 방법을 사용하는데, 일반적으로 표본의 개수를 충분히 늘리면 정확하면서 안정된 값을 구할 수 있다. 본 논문에서는 periodogram과 같은 표본 spectrum의 평균으로 유한한 개수의 영상이 주어졌을 때 일관적이고 효율적인 NNPS 값을 제공 할 수 있는 두 가지 방법을 제안하고 그 성능을 비교하고 분석했다. 실제 두 종류의 방사선 디텍터로부터 획득한 x선 영상을 사용하여 제안한 방법을 실험하였으며, 주어진 영상을 사용하여 표본 spectrum의 최대 가지 수를 갖는 조합으로 NNPS를 구하고 평균을 내는 방법이 기존 방법에 비하여 안정된 NNPS 측정이 가능함을 보였다.

• 지구물리와물리탐사
• /
• 제5권3호
• /
• pp.169-177
• /
• 2002

일반 반사법 탐사 모델링에서 효율적인 주파수영역 수치모델링의 실용화를 위해 무엇보다 해결해야할 과제는 파장당 격자수를 줄이는 것이다. 본 연구에서는 이에 착안하여 수치분산 및 수치이방성을 최소화시키면서 한 파장당 필요한 격자수를 줄일 수 있는 가중평균 유한요소법을 개발하였다. 강성행렬과 질량행렬은 네 개의 사각형 유한요소로 확장하였으며, 모든 격자점이 포함되도록 유한요소를 배열하여 조합하였다. 확장된 네 개의 강성행렬과 질량행렬은 가중평균계수를 주어 선형결합하는 방법으로 가중평균하였다. 가중평균계수는 확장된 25점 평균차분법을 사용하여 가중평균계수를 결정하였다. 또한, 정확도 향상은 2차원 균질모델 과 수평층 모델에서 해석해와 한 파장당 4개의 격자점을 준 가중평균 유한요소법 수치해 비교를 통하여 검증하였다. 또한, 석유탐사에서 활용성이 높은 향사구조 모델을 선정하여 이의 반응을 관찰한 결과 지층경계면외에 네 개의 사각형 유한요소들의 구성으로 인한 인위적인 파의 도달이 인식되지 않았다. 따라서, 본 연구에서 고안된 가중평균 유한요소법은 주파수영역에서 폭 넓은 수치모델링연구을 가능하게 할 것이다.

• The Journal of the Acoustical Society of Korea
• /
• 제24권4E호
• /
• pp.128-131
• /
• 2005

A new algorithm for speech signal segmentation is proposed. This algorithm is based on finding successive similar frames belonging to a segment and represents it by an average spectrum. The speech signal is a slowly time varying signal in the sense that, when examined over a sufficiently short period of time (between 10 and 100 ms), its characteristics are fairly stationary. Generally this approach is based on finding these fairly stationary periods. Advantages of the. algorithm are accurate border decision of segments and simple computation. The automatic segmentations using frame averaging show as much as $82.20\%$ coincided with manually verified segmentation of CMU ARCTIC corpus within time range 16 ms. More than $90\%$ segment boundaries are coincided within a range of 32 ms. Also it can be combined with many types of automatic segmentations (HMM based, acoustic cues or feature based etc.).

• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.385-393
• /
• 1999

An open loop vibrational control for an underactuated mechanical system with amplitude and frequently modulation is investigated. Since there is no direct external input to an unactuated joint, the dynamic coupling between the actuated and unactuated joints is utilized for controlling the unactuated joint. Feedback linearization has been performed to incorporate fully the known nonlinearities of the underactuated system considered. The actuated joints are firstly positioned to their desired locations, and the periodic oscillatory inputs are applied to the actuated joints to move the remaining unactuated joints to their target positions. The amplitudes and frequencies of the vibrations introduced are determined through averaging analysis. A systematic way of obtaining an averaged system for the underactuated system via a coordinate transformation is developed. A control design example of 2R planer manipulator with a free joint with no brake is provided.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.25-29
• /
• 2016

A quench detection system of KSTAR Poloidal Field (PF) coils is inevitable for stable operation because normal zone generates overheating during quench occurrence. Recently, new voltage quench detection method, combination of Central Difference Averaging (CDA) and Mutual Inductance Compensation (MIK) for compensating mutual inductive voltage more effectively than conventional voltage detection method, has been suggested and studied. For better performance of mutual induction cancellation by adjacent coils of CDA+MIK method for KSTAR coil system, balance coefficients of CDA must be estimated and adjusted preferentially. In this paper, the balance coefficients of CDA for KSTAR PF coils were numerically estimated. The estimated result was adopted and tested by using simulation. The CDA method adopting balance coefficients effectively eliminated mutual inductive voltage, and also it is expected to improve performance of CDA+MIK method for quench detection of KSTAR PF coils.