• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.115-121
• /
• 1980

The oils extracted with n-hexane from 6 samples of rapeseed (5 Korean samples and 1 Canadian sample) and samples of rapeseed salad oil at the market in Korea were examined. The physical and chemical characteristics of the oils were determined, and the lipid components of the oils were determined by column, thin layer-and gas liquid chromatography. The results obtained were as follows 1. The average crude fat contents in rapeseed was 43.3 % and the content of Korean was higher than that of Canadian by about 3 %. 2. The average values of specific gravity-, refractive-index, saponification value, iodine value, acid value and nonsaponifiable content of the crude oils extracted from Korean rapeseed were 0.9133, 1.4726, 103.6, 0.51 and 1.17%, respectively. 3. The average content of polar and nonpolar in total lipids were 2.7 % and 97.3 % respectively. Triglyceride was the predominant in nonpolar fraction, averaging 92.7 % of total lipids while sterol esters and diglycerides constituted 1.5 % and 1.2 % of the total. Monoglycerides, free fatty acids and free sterols were minor components of the nonpolar fraction. The polar lipids were primarily phospholipids(1.8%), but a significant amount of glycolipid (0.7%) was also found in each oil. 4. The fatty acid compositions in the total lipids showed the Korean rapeseeds averaged 46.7 % erucic, 15 % oleic, 13.4 % linoleic, 9.3 % eicosenoic and 4.3 % palmitic acids. The Canadian rapeseed, however, contained only 0.7 % of erucic acid. 5. The fatty acid compositions in nonpolar lipid fractions was similar to the pattern in those of the total lipids. But phospholipid and glycolipid fractions were lower in erucic acid content than nonpolar lipid fractions.

• Korean Journal of Remote Sensing
• /
• v.14 no.1
• /
• pp.83-94
• /
• 1998

To have a basic idea on the spectral reflectance signature in paddy rice canopy, we measured spectral reflectance from paddy rice canopy(Ilpumbyeo) using spectroradiometer (GER Inc. SFOV : 0.35~2.50 ${\mu}{\textrm}{m}$) in situ weekly or biweekly from transplanting to ripening stage. Spectral reflectance of the visible range (0.4~0.7 ${\mu}{\textrm}{m}$) was decreased to below 5% and then slightly increased again after heading stage in rice canopy. Meanwhile spectral reflectance of the near-infrared range (0.7~1.1 ${\mu}{\textrm}{m}$) was increased to 40~50% and then decreased a great deal after panicle initiation stage in rice canopy. Landsat TM equivalent band set ($\bar{p}$$_{TMi}$) was created by averaging spectral reflectance values to the real TM bands. Correlation analysis between the rice crop variables (LAI, total dry matter) and TM equivalent band set ($\bar{p}$$_{TMi}$) showed that LAI and total dry matter of rice were highly correlated with visible bands such as $\bar{p}$$_{TM1}$, $\bar{p}$$_{TM2}$, and $\bar{p}$$_{TM3}$. Ratio values ($\bar{p}$$_{TMi}$/$\bar{p}$$_{TMi}$) such as $\bar{p}$$_{TM4}$/$\bar{p}$$_{TM2}$ were also highly correlated with rice crop variables such as LAI and total dry matter.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.7-17
• /
• 2005

The determination of seismic velocities in refractors for near-surface seismic refraction investigations is an ill-posed problem. Small variations in the computed time parameters can result in quite large lateral variations in the derived velocities, which are often artefacts of the inversion algorithms. Such artefacts are usually not recognized or corrected with forward modelling. Therefore, if detailed refractor models are sought with model based inversion, then detailed starting models are required. The usual source of artefacts in seismic velocities is irregular refractors. Under most circumstances, the variable migration of the generalized reciprocal method (GRM) is able to accommodate irregular interfaces and generate detailed starting models of the refractor. However, where the very-near-surface environment of the Earth is also irregular, the efficacy of the GRM is reduced, and weathering corrections can be necessary. Standard methods for correcting for surface irregularities are usually not practical where the very-near-surface irregularities are of limited lateral extent. In such circumstances, the GRM smoothing statics method (SSM) is a simple and robust approach, which can facilitate more-accurate estimates of refractor velocities. The GRM SSM generates a smoothing 'statics' correction by subtracting an average of the time-depths computed with a range of XY values from the time-depths computed with a zero XY value (where the XY value is the separation between the receivers used to compute the time-depth). The time-depths to the deeper target refractors do not vary greatly with varying XY values, and therefore an average is much the same as the optimum value. However, the time-depths for the very-near-surface irregularities migrate laterally with increasing XY values and they are substantially reduced with the averaging process. As a result, the time-depth profile averaged over a range of XY values is effectively corrected for the near-surface irregularities. In addition, the time-depths computed with a Bero XY value are the sum of both the near-surface effects and the time-depths to the target refractor. Therefore, their subtraction generates an approximate 'statics' correction, which in turn, is subtracted from the traveltimes The GRM SSM is essentially a smoothing procedure, rather than a deterministic weathering correction approach, and it is most effective with near-surface irregularities of quite limited lateral extent. Model and case studies demonstrate that the GRM SSM substantially improves the reliability in determining detailed seismic velocities in irregular refractors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.88-103
• /
• 2019

This paper aims to identify planting design for the renewal of Okgu Park, located in Siheung, Gyeonggi-do. I designate planting concept fit spatial functions and also suggest planting designs that are proper for a growth environment. The spatial functions of the research site are divided on the basis of the park facilities, its surroundings, and usage. To understand the planting concept, this paper looks into the distribution of plant species and the precise planting structure. To understand the planting concept and the current usage of shade space in the park, I examine the distribution of plant species and the precise planting structure. There are 48 kinds of plants, with Zoysia japonica area (28.84%), Prunus yedoensis (8.0%), Pinus thunbergii (6.73%) and Zelkova serrata (6.38%) taking up the majority. 27 places were chosen for researching the precise planting structure. The research shows that the average green coverage ratio is 38.14% and the average green capacity coefficient is $0.72m^3/m^2$. The growth defective rate of trees in the shade areas is estimated by averaging the classified growth conditions of individual trees per block of shade areas. Areas with an inferior environment for growth and low spatial usage in Okgu Park are selected as subjects for planting design. After comparing the spatial functions with planting concepts and analyzing the growth of plants, I identify $36,236m^2$ areas with inferior growth condition. I also examine structures and the surrounding areas to find areas that require urgent planting improvement, specifically identifying landscape space and shade space around the fountain and the buffer space nearby the North gate. I rearrange spatial functions in the selected areas to devise a planting design considering the existing vegetation, layer structure, and its usage. I set the planting concept and direction to improve the landscape of the selected areas through implementing a planting design so the park users can be satisfied with each space.

• Journal of Korea Water Resources Association
• /
• v.54 no.6
• /
• pp.419-431
• /
• 2021

In Seoul, it has been confirmed that the duration of rainfall is shortened and the frequency and intensity of heavy rains are increasing with a changing climate. In addition, due to high population density and urbanization in most areas, floods frequently occur in flood-prone areas for the increase in impermeable areas. Furthermore, the Seoul City is pursuing various projects such as structural and non-structural measures to resolve flood-prone areas. A disaster prevention performance target was set in consideration of the climate change impact of future precipitation, and this study conducted to reduce the overall flood damage in Seoul for the long-term. In this study, 29 GCMs with RCP4.5 and RCP8.5 scenarios were used for spatial and temporal disaggregation, and we also considered for 3 research periods, which is short-term (2006-2040, P1), mid-term (2041-2070, P2), and long-term (2071-2100, P3), respectively. For spatial downscaling, daily data of GCM was processed through Quantile Mapping based on the rainfall of the Seoul station managed by the Korea Meteorological Administration and for temporal downscaling, daily data were downscaled to hourly data through k-nearest neighbor resampling and nonparametric temporal detailing techniques using genetic algorithms. Through temporal downscaling, 100 detailed scenarios were calculated for each GCM scenario, and the IDF curve was calculated based on a total of 2,900 detailed scenarios, and by averaging this, the change in the future extreme rainfall was calculated. As a result, it was confirmed that the probability of rainfall for a duration of 100 years and a duration of 1 hour increased by 8 to 16% in the RCP4.5 scenario, and increased by 7 to 26% in the RCP8.5 scenario. Based on the results of this study, the amount of rainfall designed to prepare for future climate change in Seoul was estimated and if can be used to establish purpose-wise water related disaster prevention policies.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.657-664
• /
• 2021

In this study, we investigated the relationships between the air quality (PM_2.5, PM₁₀, O₃) concentrations and local geographical characteristics (terrain heights, building area ratios, population density in 9 km × 9 km gridded subareas) in the Seoul metropolitan area. To analyze the terrain heights and building area ratios, we used the geographic information system data provided by the NGII (National Geographic Information Institute). Also, we used the administrative districts and population provided by KOSIS (Korean Statistical Information Service) to estimate population densities. We analyzed the PM_2.5, PM₁₀, and O₃ concentrations measured at the 146 AQMSs (air quality monitoring system) within the Seoul metropolitan area. The analysis period is from January 2010 to December 2020, and the monthly concentrations were calculated by averaging the hourly concentrations. The terrain is high in the northern and eastern parts of Gyeonggi-do and low near the west coastline. The distributions of building area ratios and population densities were similar to each other. During the analysis period, the monthly PM_2.5 and PM₁₀ concentrations at 146 AQMSs were high from January to March. The O₃ concentrations were high from April to June. The population densities were negatively correlated with PM_2.5, PM₁₀, and O₃ concentrations (weakly with PM_2.5 and PM₁₀ but strongly with O₃). On the other hand, the AQMS heights showed no significant correlation with the pollutant concentrations, implying that further studies on the relationship between terrain heights and pollutant concentrations should be accompanied.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.75-82
• /
• 2023

Data for measuring the flow rate of streams are used as important basic data for the development and maintenance of water resources, and many experts are conducting research to make more accurate measurements. Especially, in Korea, monsoon rains and heavy rains are concentrated in summer due to the nature of the climate, so floods occur frequently. Therefore, it is necessary to measure the flow rate most accurately during a flood to predict and prevent flooding. Thus, the U.S. Geological Survey (USGS) introduces 1, 2, 3 point method using a flow meter as one way to measure the average flow rate. However, it is difficult to calculate the average flow rate with the existing 1, 2, 3 point method alone.This paper proposes a new 1, 2, 3 point method formula, which is more accurate, utilizing one probabilistic entropy concept. This is considered to be a highly empirical study that can supplement the limitations of existing measurement methods. Data and Flume data were used in the number of holesman to demonstrate the utility of the proposed formula. As a result of the analysis, in the case of Flume Data, the existing USGS 1 point method compared to the measured value was 7.6% on average, 8.6% on the 2 point method, and 8.1% on the 3 point method. In the case of Coleman Data, the 1 point method showed an average error rate of 5%, the 2 point method 5.6% and the 3 point method 5.3%. On the other hand, the proposed formula using the concept of entropy reduced the error rate by about 60% compared to the existing method, with the Flume Data averaging 4.7% for the 1 point method, 5.7% for the 2 point method, and 5.2% for the 3 point method. In addition, Coleman Data showed an average error of 2.5% in the 1 point method, 3.1% in the 2 point method, and 2.8% in the 3 point method, reducing the error rate by about 50% compared to the existing method.This study can calculate the average flow rate more accurately than the existing 1, 2, 3 point method, which can be useful in many ways, including future river disaster management, design and administration.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.129-141
• /
• 2023

Crop models have been used to predict yield under diverse environmental and cultivation conditions, which can be used to support decisions on the management of forage crop. Cultivar parameters are one of required inputs to crop models in order to represent genetic properties for a given forage cultivar. The objectives of this study were to compare calibration and ensemble approaches in order to minimize the uncertainty of crop yield estimates using the SIMPLE crop model. Cultivar parameters were calibrated using Log-likelihood (LL) and Generic Composite Similarity Measure (GCSM) as an objective function for Metropolis-Hastings (MH) algorithm. In total, 20 sets of cultivar parameters were generated for each method. Two types of ensemble approach. First type of ensemble approach was the average of model outputs (E_em), using individual parameters. The second ensemble approach was model output (E_pm) of cultivar parameter obtained by averaging given 20 sets of parameters. Comparison was done for each cultivar and for each error calculation methods. 'Jowoo' and 'Yeongwoo', which are forage rice cultivars used in Korea, were subject to the parameter calibration. Yield data were obtained from experiment fields at Suwon, Jeonju, Naju and I ksan. Data for 2013, 2014 and 2016 were used for parameter calibration. For validation, yield data reported from 2016 to 2018 at Suwon was used. Initial calibration indicated that genetic coefficients obtained by LL were distributed in a narrower range than coefficients obtained by GCSM. A two-sample t-test was performed to compare between different methods of ensemble approaches and no significant difference was found between them. Uncertainty of GCSM can be neutralized by adjusting the acceptance probability. The other ensemble method (E_pm) indicates that the uncertainty can be reduced with less computation using ensemble approach.

• Korean Journal of Radiology
• /
• v.21 no.7
• /
• pp.880-890
• /
• 2020

Objective: Patients with chronic obstructive pulmonary disease (COPD) are known to be at risk of osteoporosis. The purpose of this study was to evaluate the association between thoracic vertebral bone density measured on chest CT (D_Thorax) and clinical variables, including survival, in patients with COPD. Materials and Methods: A total of 322 patients with COPD were selected from the Korean Obstructive Lung Disease (KOLD) cohort. D_Thorax was measured by averaging the CT values of three consecutive vertebral bodies at the level of the left main coronary artery with a round region of interest as large as possible within the anterior column of each vertebral body using an in-house software. Associations between D_Thorax and clinical variables, including survival, pulmonary function test (PFT) results, and CT densitometry, were evaluated. Results: The median follow-up time was 7.3 years (range: 0.1-12.4 years). Fifty-six patients (17.4%) died. D_Thorax differed significantly between the different Global Initiative for Chronic Obstructive Lung Disease stages. D_Thorax correlated positively with body mass index (BMI), some PFT results, and the six-minute walk distance, and correlated negatively with the emphysema index (EI) (all p < 0.05). In the univariate Cox analysis, older age (hazard ratio [HR], 3.617; 95% confidence interval [CI], 2.119-6.173, p < 0.001), lower BMI (HR, 3.589; 95% CI, 2.122-6.071, p < 0.001), lower forced expiratory volume in one second (FEV₁) (HR, 2.975; 95% CI, 1.682-5.262, p < 0.001), lower diffusing capacity of the lung for carbon monoxide corrected with hemoglobin (DL_CO) (HR, 4.595; 95% CI, 2.665-7.924, p < 0.001), higher EI (HR, 3.722; 95% CI, 2.192-6.319, p < 0.001), presence of vertebral fractures (HR, 2.062; 95% CI, 1.154-3.683, p = 0.015), and lower D_Thorax (HR, 2.773; 95% CI, 1.620-4.746, p < 0.001) were significantly associated with all-cause mortality and lung-related mortality. In the multivariate Cox analysis, lower D_Thorax (HR, 1.957; 95% CI, 1.075-3.563, p = 0.028) along with older age, lower BMI, lower FEV₁, and lower DL_CO were independent predictors of all-cause mortality. Conclusion: The thoracic vertebral bone density measured on chest CT demonstrated significant associations with the patients' mortality and clinical variables of disease severity in the COPD patients included in KOLD cohort.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.64-70
• /
• 2024

The experiment was conducted to determine the changes in seed productivity of Italian ryegrass (Lolium multiflorum Lam.) according to nitrogen fertilization levels in the southern region of Korea. Italian ryegrass (IRG) variety 'Green Call' was sown in the fall of 2021 in Jinju, Gyeongsangnam-do. The experiment consisted of three nitrogen fertilizer levels (100, 120, and 140 N kg/ha) with three replications using a randomized complete block design. Harvesting was done approximately 30 days after heading on May 18th. There was no difference in heading date among treatments, which occurred on April 18th. The longest IRG was observed in the 140 N kg/ha treatment, but there was no significant difference. No significant differences were observed in lodging, disease resistance, and cold tolerance among treatments, but lodging was severe in all treatments. The length of the spike averaged 44.95 cm, with no difference among treatments, and the number of seeds per spike was highest in the 120 N kg/ha treatment. Seed yield increased with increasing nitrogen fertilizer levels, averaging 3,707 kg/ha (as-fed basis). DM content of seed and straw averaged 76.95% and 62.19%, respectively, with no significant differences among treatments. The remaining straw after harvesting averaged 6,525 kg/ha on a dry matter basis, with the highest value observed in the 140 N kg/ha treatment. Overall, considering the results, the optimal nitrogen fertilizer application rate for seed production of Italian ryegrass in the southern region when sown in autumn was found to be 120 N kg/ha.