• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.845-848
• /
• 1999

We designed and fabricated partially shorted QMSAs(Quarter-Wavelength Microstrip Antennas) for 850［MHz］band on various Copper-clad Laminates substrates (TACONIC company), where the width of the radiation patch is identical with that of the ground plane and the radiation patch is partially shorted to the ground plane. The resonant frequencies and the return losses according to the electrical thickness were measured by reducing the PSW (Partially Shorted Width) to 0［mm］. As a result, a good characterized antenna with an average 11% reduced resonant length and a return loss -15.86~-30.68［㏈］ was obtained when the total PSW was in the range of 70% of radiated patch width, compared to the conventional QMSA.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.401-404
• /
• 2001

We designed and fabricated symmetrical partially shorted MSAs for 850 MHz band on various Copper-clad Laminates substrates, where the width of the radiation patch is identical with that of the ground plane and the radiation patch is partially shorted to the ground plane. The resonant frequency, return loss and input impedance due to the permittivity(2.5, 3.5, 10.0) and thickness(0.76~1.57 mm, 6 types) were measured by reducing the PSW (Partially Shorted Width) to 0 mm. As a result, good characterized antennas with average 11% reduced resonant length and return loss 7.288~29.445 dB were obtained when the total PSW was in the range of 70% of radiated patch width, compared to the conventional λ/4 MSA.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.481-493
• /
• 1991

The purpose of this study was to obtain the norm of the crown shape (tip, torque, in/out) and arch form, and to provide basic data for fabricating straight wire bracket and ideal arch wire for Korean. 100 subjects aged from 17 to 26 (50 females, 50 males) were selected with a normal occlusion. By measuring the size, angulation, inclination, arch width, facial prominance of the teeth and the molar offset, the following results were obtained. 1. Average, standard deviation, minimum, maximum of each measuring item for each teeth were obtained. 2. Intermolar width (${\underline{6}}$ to ${\underline{6}}$) of upper arch before occlusal surface cutting and intermolar width of upper arch (${\underline{6}}$ to ${\underline{6}}$, ${\underline{7}}$ to ${\underline{7}}$) after occlusal surface cutting showed statistical difference. There was no difference between sexes in any other measuring items. 3. Arch form and specification of straight wire bracket for Korean who have normal occlusion was obtained.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.205-219
• /
• 1993

The purpose of this study was to determine maximal width of bodice and skirt pattern of 50 college girls for more scientific patternmaking development in clothing construction. The body measurements data of this study was calculated by SAS, means analysis, regression analysis and T-test were used. The results are as follows. 1. The results of analyzing the whole 85 items of the entire body measurements of model are in table 2. 2. It was suggested the whole average cross section of measurement parts by rohrer index as the result of gathering the each section. 3. Representative items were suggested as fundamental parts in determining the maximal width of bodice and skirt basic pattern by rohrer index. 4. The entire abbreviated calculation formula of bodice and xkirt pattern was suggested.

• KIEAE Journal
• /
• v.7 no.5
• /
• pp.41-46
• /
• 2007

The lightshelf system, a horizontal shading and light redirect device, should improve the visual environment by optimal light distributions and intense illumination levels of a interior. This study aims to evaluate the daylighting performance of window integrated lightshelf systems by computer simulations. For the study, the standard office plan is analyzed through the field surveys. And then, the various lightshelf types attached window systems are picked out from existed research results. The max, minimum and average illuminance levels of interiors and illuminance distributions are evaluated by Lightsacpe 3.2 programs based on the installing height, shape type and moving angle of lightshelfs. As results, it is suggested that the optimum lightshelf shapes are the height 1.8m and the width 600mm. Also, in mixed lightshelf, the outside width 600mm, inside width 400 are efficient on indoor daylighting performance.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.109-114
• /
• 2006

An investigation was carried out for the annual ring width, longitudinal tracheid diameter and wall thickness in different tree heights for Pinus koraiensis Sieb. et. Zucc. The annual ring width increased along with the tree height, however the tracheid diameter and wall thickness decreased with the tree height. Tracheid wall thickness was found the thickest at 2.0m from the above ground samples and it increased gradually from pith to bark. Radial tracheid diameter was found to be larger than that of tangential tracheid diameter in earlywood. But, it was found to be the opposite in latewood. In earlywood, the average values of tracheid wall thickness was found the range of $2.1-3.0{\mu}m$, whereas, in latewood, it was $2.4-4.2{\mu}m$.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.486-490
• /
• 2013

A portable infrared laser transmitter delivering a highly uniform detectable beam was demonstrated. It incorporates a flexible beam shaper, comprising a perforated diffuser sheet in conjunction with a pinhole. The beam shaper plays the prominent role of flexibly tailoring the incoming light via both scattering and diffraction, in order to equalize the effective beam width over a long distance. The intensity profile of a generated beam was practically observed, demonstrating that a substantially uniform beam of 70-cm width was achieved for a given threshold detection level, with an average deviation of 6% over a range of 600 m.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4637-4641
• /
• 2023

For nuclear decommissioning applications, a study was conducted to investigate the feasibility of using a laser for long-distance cutting in complex structures. Cutting tests were performed on stainless steel plates with thicknesses ranging from 10 mm to 30 mm at distances of 300 mm-700 mm from the laser head, using a laser power of 6 kW. Remarkably, the 10 mm and 20 mm thick stainless-steel plates were successfully cut at a distance of 700 mm from the head. Based on the trends observed in the results, it is anticipated that these thicknesses could also be cut at distances of approximately 1 m. Similarly, the 30 mm thick stainless-steel plate was effectively cut at a distance of 500 mm from the head. To evaluate the amount of secondary waste generated, the kerf width was measured. Due to the long-distance cutting, the average kerf width ranged from 6 mm to 16 mm. Despite the wider kerf width, long-distance cutting holds promise for efficiently handling hard-to-reach targets in nuclear decommissioning scenarios.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1027-1030
• /
• 1999

Recently many efforts on the development of automatic processing system for delivery sequence sorting have been performed in ETRI, which requires the use of postal 4 state bar code system to encode delivery points. This paper addresses the issue on the reduction of reading error in postal 4 state raster beam based bar code reader by adjusting measured values of bar code width to its average value over each interval. The test results show that the above method reduces the average reading error rate approximately by 90-100%.

• Journal of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.707-715
• /
• 2007

The vulnerability of concrete to its environment is significantly dependent on the fact that concrete is a porous material. For well-consolidated and well-cured concrete, its service life is a very long and an entrance of aggressive substance might be only pores. However, for cracked concrete, cracks should be preferential channel for the penetration of aggressive substance such as chloride ions. The effect of crack on chloride penetration depends on its size for example, crack width and crack depth. The purpose of this study is examining the effect of crack width and crack depth on chloride penetration. In order to visualize chloride penetration via cracks, RCM (rapid chloride migration) testing is accomplished. Crack width is examined using an optical microscope and CMOD value is used to estimate average crack width. From the examination on the trend of chloride diffusion coefficients of concrete specimens with various crack widths, a critical crack width and a critical crack depth are found out.