• Design & Manufacturing
• /
• v.14 no.3
• /
• pp.17-22
• /
• 2020

As devices such as smartphones, tablet PC, and wearable devices have been miniaturized, the connectors that go into the devices are also designed to be very small. The connector combines the plug and the receptacle to transfer electricity. As devices are miniaturized, the contact shape is formed by partially thinning the thickness of the raw material of the terminal in order to lower the coupling height of the plug and receptacle. The product used in this study is a receptacle terminal used for 0.4mm pitch board to board connector among fine pitch connectors. When the material thickness is reduced by forging the receptacle terminal, the width change of the pin is checked. To reduce the thickness of the material by forging, pre-notching is applied in the first step, forging in the second step, and notching in the third step. After forming the width dimension of the pin to 0.28 mm in the pre-notching process, in the forging process, the material thickness 0.08 mm and 0.02 mm (25%) were forged and the thickness was changed to 0.06 mm and the width change amount of the pin was measured. The facility produced 10,000 pieces at 400 SPM using a Yamada Dobby (MXM-40L) press, and thirty pins were measured and the average value was shown. After forging by using C5210-H (HP) and NKT322-EH, which are frequently used in connectors, analyze the amount of change in each material. The effect of punching oil on forging is investigated by appling FM-200M, which is highly viscous, and FL-212, fast drying oil. This study aims to minimize mold modification by predicting the amount of material change after forging.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.391-399
• /
• 2021

The conformal array sensor has different sub-array depending on different beam steering directions. According to the method to effective the sensor, the performance of the conformal array sensor can be different, where the sub-array selects an effective sensor. Also, due to the figure of the conformal array sensor, the figure of the sub-array can be different each other, which results in different performance on directivity index, beam width and etc. In this paper, two methods to select sub-array which is the criteria for each sensors position vector and directive vector were proposed. For two sub-array selection methods, the performance of the directivity index, horizontal and vertical beam width were compared with the average and variance. In addition, this comparison was conducted when the number of sensors was fixed. When the number of sensors was not fixed, the directional vector method mainly results in high performance, but the performance of vertical beam width was lower or equal. When the number of sensors was fixed, the performance of two methods is similar, but the performance of variance was deteriorated.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.579-589
• /
• 2009

Hwang River in South Korea, has experienced channel adjustments due to dam construction. Hapcheon main dam and re-regulation dam. The reach below the re-regulation dam (45 km long) changed in flow regime, channel width, bed material distribution, vegetation expansion, and island formation after dam construction. The re-regulation dam dramatically reduced annual peak flow from 654.7 $m^3$/s to 126.3 $m^3$/s and trapped the annual 591 thousand $m^3$ of sediment load formerly delivered from the upper watershed since the completion of the dam in 1989. An analysis of a time series of aerial photographs taken in 1982, 1993, and 2004 showed that non-vegetated active channel width narrowed an average of 152 m (47% of 1982) and non-vegetated active channel area decreased an average of 6.6 km2 (44% of 1982) between 1982 and 2004, with most narrowing and decreasing occurring after dam construction. The effects of daily pulses of water from peak hydropower generation and sudden sluice gate operations are investigated downstream of Hapcheon Dam in South Korea. The study reach is 45 km long from the Hapcheon re-regulation Dam to the confluence with the Nakdong River. An analysis of a time series of aerial photographs taken in 1982, 1993, and 2004 showed that the non-vegetated active channel width narrowed an average of 152 m (47% reduction since 1982). The non-vegetated active channel area also decreased an average of 6.6 $km^2$ (44% reduction since 1982) between 1982 and 2004, with most changes occurring after dam construction. The average median bed material size increased from 1.07 mm in 1983 to 5.72 mm in 2003, and the bed slope of the reach decreased from 0.000943 in 1983 to 0.000847 in 2003. The riverbed vertical degradation is approximately 2.6 m for a distance of 20 km below the re-regulation dam. It is expected from the result of the unsteady sediment transport numerical model (GSTAR-1D) steady simulations that the thalweg elevation will reach a stable condition around 2020. The model also confirms the theoretical prediction that sediment transport rates from daily pulses and flood peaks are 21 % and 15 % higher than their respective averages.

• The korean journal of orthodontics
• /
• v.35 no.4 s.111
• /
• pp.251-261
• /
• 2005

Enlargement is an inherent property of X-rays which occurs when straight hues diverse from small a focal spot. The purpose of the present study was to evaluate the validity of the correction of gonial angle width enlarged on frontal cephalogram, using frontal and lateral cephalograms taken orthogonally from each other. In 40 adult individuals, frontal and lateral cephalograms were taken at a $90^{\circ}$ angle using the Head Posture Aligner. The angle width was measured on the frontal cephalogram and subsequently. the corrected angle width was calculated using the magnification rate of two cephalograms. Measured and corrected angle widths were compared with the measurement from the 3D CT image. The measurement or the frontal cephalogram showed a 9.10mm of enlargement on average ranging from 7.92 to 11.31mm. Corrected angle width measurement showed a 0.14mm difference with the 3D CT image measurement, which was not statistically significant. The results of the study indicate that actual au91e width can be approached through calculation using frontal and lateral cephalograms taken orthogonally with the help of the Head Posture Aligner The study also showed that the magnitude of correction error did not show a significant correlation with the amount of menton deviation, and it suggests that the present correction method is valid even in individuals with severe facial asymmetry.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.717-729
• /
• 1998

This study was done to estimate arch forms and dimensions at the bracket level where archwire was placed in Angle's Class I first premolars extraction cases. 60 post-treatment dental casts which had attained good orthodontic treatment results were used in this study Many landmarks and linear measurement items to describe arch forms and dimensions were determined and measured. With a computer system and digitizer, arch forms were described and linear measurement items were statistically analysed. The following results were obtained. 1. The average labial and lingual arch forms at the bracket level were obtained. 2. Arch forms were expressed by parabolic equations and coefficients of determination. 3. Arch widths were larger in male than in female. 4. There were statistical significances in upper intercanine width, upper interfirst molar width, upper intersecond molar height, lower intercanine width and lower interfirst molar width between both sexes (p<0.05, p<0.01). 5. Interfirst molar width differences between maxilla and mandible were 6.43mm in male and 6.05mm in female.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.11-22
• /
• 2019

The objective of this study was to improve the cross-sectional area and height estimation method using stream width. Stream water levels should be calculated together to simulate inundation of agricultural land. However, cross-sectional survey data of small rural rivers are insufficient. The previous study has developed regression equations between the width and the cross-sectional area and between the width and the height of stream cross-section, but can not be applied to a wide range of stream widths. In this study, cross-sectional survey data of 6 streams (Doowol, Chungmi, Jiseok, Gam, Wonpyeong, and Bokha stream) were collected and divided into upstream, midstream and downstream considering the locations of cross-sections. The regression equations were estimated using the complete data. $R^2$ between the stream width and cross-sectional area was 0.96, and $R^2$ between width and height was 0.81. The regression equations were also estimated using divided data for upstream, midstream and downstream considering the locations of cross-sections. The range of $R^2$ between the stream width and cross-sectional area was 0.86 - 0.91, and the range of $R^2$ between width and height was 0.79 ? 0.92. As a result of estimating the cross-sections of 6 rivers using the regression equations, the regression equations considering the locations of cross-sections showed better performance both in the cross-sectional area and height estimation than the regression equations estimated using the complete data. Hydrologic Engineering Center - River Analysis System (HEC-RAS) was used to simulate the flood stage analysis of the estimated and the measured cross-sections for 50-year, 100-year, and 200-year frequency floods. As a result of flood stage analysis, the regression equations considering the locations of cross-sections also showed better performance than the regression equations estimated using the complete data. Future research would be needed to consider the factors affecting the cross-sectional shape such as river slope and average flow velocity. This study can be useful for inundation simulation of agricultural land adjacent to an unmeasured stream.

• Journal of Fashion Business
• /
• v.14 no.1
• /
• pp.11-26
• /
• 2010

This study was carried out using personal measurement for female college students who have a great interest in fashion at 20-24 age, and examined somatotype character. As a means of a character type test, the grades were laid by using MBTI which proved to be objective, and relativity between character types was laid by conducting correlation analysis. The conclusions which can be drawn from this study are as followed. 1. In 4 preference index, which was classified by MBTI, Sensing(S) type was the highest of 17.27% at the average and 68.5% at the distribution rate each. The average of Extraversion(E) type was 14.56% and it's distribution rate was 64.5%. Index of types were : Intuition(N) 12.49%, Introversion(I) 11.75%, Perceiving(P) 12.50%. Average distribution rate of each types were : N 31.5%, I 35.5%, P 40.3%. And average of Sensing(S) type was the lowest, 11.09%. Like American Students, the subjects of this study showed higher in the E type than in the I type. The distribution rate of 16 character types of MBTI were : ESTJ 18.5%, ESFP 13.7%, ISTJ and ESFJ 9.7%. But INTP and INFP were low, 2.4% and 0.8%. 2. Average sizes of subjects for this study were : height 160.49cm, weight 51.83kg, bust 83.22cm, waist 65.49cm, hips 90.70cm. As compared with measurement of women at 20-24 age of Size Korea(2004), the subjects of this study showed less, about 0.2-5cm in height, 0.2-2cm in circumference except in waist, and 0.5-3.6cm in length. 3. After examining the relativity between personal measurement categories of the subjects and character type through the MBTI, Extraversion(E) type showed inverse correlation in stature, height, biacromial breadth, and subcutaneous fat thickness of posterior iliospinale. Contrary to the E type, the Introversion(I) type showed positive correlation. Sensing(S) type showed inverse correlation only in biacromial breadth, Intuition(N) type showed positive correlation in most categories including height, width and the subcutaneous fat thickness. Thinking(T) type showed positive correlation in bust point-bust point, chest depth and hip width. Feeling(F) type, on the other hand, showed inverse correlation. The Judging(J) type showed inverse correlation in stature, height, length and the parts of chest. In contrast, Perceiving(P) type showed positive correlation in other categories including biacromial breadth, same as the J type.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1240-1243
• /
• 2004

Multi-Valued Image Entropy Coding (MVIEC) is a new class of joint source channel coding, which reduces both input-width (1/4) and average current (0.36-1.3) for LCD source drivers. This paper describes the detail results on MVIEC for several image sets in order to verify the practical performance.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.13-24
• /
• 2002

CDMA 시스템은 성능의 우수성에도 불구하고 신호처리의 복잡성과, 여러 채널의 신호를 동시에 전송시, 채널수가 증가할수록 신호의 PAPR(Peak to Average Power Ratio)가 증가하는 문제점을 갖고 있다. 본 논문에서는 멀티코드 CDMA의 특성과 구조를 유지하면서도 전송신호의 레벨이 항상 일정하여 기존의 TDMA 시스템 구조로도 멀티코드 CDMA 신호를 전송할 수 있는 Binary CDMA 기술에 대해 소개한다. Binary CDMA 기술은 적용 기술별로는 펄스폭 CDMA(PW/CDMA; Pulse Width CDMA), 다위상 CDMA(MP/CDMA; Multi Phase CDMA), 코드선택 CDMA(CS/CDMA; Code Select CDMA)로 구분되며, 사용자간의 상호간섭이 심한 환경에서 무선으로 실시간 멀티미디어를 보내는 소형 휴대형 장비에 적합한 무선 solution을 제공한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1782-1793
• /
• 1989

Stroke crossing number, syntactic pattern recognition procedure, top down recognition structure, and heuristic approach are studied for the Korean text recognition. We propose new algorithms: 1)Korean vowel seperation using limited scanning method in the Korean characters, 2) extracting strokes using stroke width method, 3) stroke crossing number and its properties, 4) average, standard deviation, and mode of stroke crossing number, and 5) classification and recognition methods of limited chinese character. These are studied with computer simuladtions and experiments.