• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.465-468
• /
• 1995

Matrix assisted laser desorption ionization in mass spectrometry is a fast and accurate method to determine the molecular weight of natural and synthetic polymers. Unknown peptides such as elastase inhibitor and $\small{D}$-hydantoinase were analyzed using sinapinic acid as matrix and their molecular weights were compared with the results from protein sequencer and gel filtration chomatography, respectively. Synthetic polymers such as polyethyleneglycol, polypropyleneglycol, polydimethylsiloxane, and polystyrene were analyzed using matrices such as 2,5-dihydroxybenzoic acid, 4-hdroxyazobenzenecarboxylic acid, and 2-nitrophenyl octyl ether. Average molecular weights of polystyrene were compared with molecular weights by gel permeation chromatography.

• Elastomers and Composites
• /
• v.33 no.2
• /
• pp.110-116
• /
• 1998

A new technology was introduced to the emulsion polymerization. It is the ultrasonic activation method which replaced a chemical initiator and the environmentally benign process. In this study, free radicals were produced by a pulse type ultrasound energy irradiation, then polystyrene latex was polymerized without chemical initiator. With ultrasonic energy density, the degree of polymerization, average molecular weight, and particle size were increased, but the polydispersity index for the molecular weight and the particle size were decreased. The optimum condition of emulsifier concentration and temperature was found to be 1.0 wt.% SDS and $40^{\circ}C$, respectively. As a result, the emulsion polymerization process without chemical initiator was proved to be comparable to common latex properties such as average molecular weight, molecular weight distribution, particle size, etc.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.812-817
• /
• 2019

A zinc-air battery is one of most promising advanced batteries due to its high specific energy density, low cost, and environmental friendliness. However, zinc anodes in zinc-air batteries lead to several issues including self-discharge, corrosion reaction, and hydrogen evolution reaction (HER). In this paper, viscosity of electrolyte has been controlled to suppress the corrosion reaction, HER, and self-discharge behavior. Various viscosity average molecular weights of poly(acrylic acid) (PAA) are adopted to prepare the electrolyte. The evaporation of electrolytes is proportional to the increase in molecular weight. In addition, enhanced self-discharge behavior is obtained when the gelling agent with high molecular weight is used. In addition, the zinc-air cell assembled with lower viscosity average molecular weight of PAA (M_v ~ 450,000) delivers 510.85 mAh/g and 489.30 mAh/g of discharge capacity without storage and with 6 hr storage, respectively. Also, highest capacity retention (95.78 %) is obtained among studied materials.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.114-118
• /
• 1998

The effects of fibron solubilization conditions on molecular weight distribution of enzymatically-hydrolyzed silk peptides were investigated. The weight-averaged molecular weights of silk proteins prepared by solubilization with calcium chloride, ethylenediamine and sulfuric acid were 41600, 3308, and 1268 dalton, respectively. Silk peptides in the average molecular weight range of 600-1200 dalton were obtained by protease treatment from solubilized silk fibroin. After the acid hydrolysis of silk protein using hydrochloric acid for 24 hr, silk protein was hydrolyzed to peptides whose average molecular weight and free amino acid content were 145 dalton and 80%, respectively. It was possible to control molecular weight distribution of silk peptides by the combination of solubilization and hydrolysis methods. Among the various treatment methods, acid solubilization followed by protease treatment had an advantage of molecular weight control for the peptide production.

• Elastomers and Composites
• /
• v.31 no.3
• /
• pp.175-182
• /
• 1996

Polymer latices, prepared from the emulsion polymerization of vinyl monomer compounds, are widely used for many industrial applications. Included among these are uses in paints, adhesives, flocculants, and heavy-duty plastics as well as their original use in synthetic rubber compounds. The emulsion polymerization process with chemical initiator has chemical disadvantage such as removal of initiator which was left after polymerization. In this study, polystyrene latex was prepared by using ultrasonic irradiation which generate the free radical, and then it was analyzed by GPC. Reaction temperature hardly have an effect on average molecular weight. Average molecular weight is increased by increasing amount of surfactant, i.e. SDS, but polydispersity is decreased. After 90 minutes of reaction time, increase and decrease of average molecular weight Is repeated. It is proposed that monodisperse polymer is obtained by controlling ultrasonic irradiation time and surfactant concentration.

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2000

Poly(3-methyltetrahydrofuran)(3-MTHF) and poly(tetrahydrofuran-co-3-MTHF), having very narrow molecular weight distribution were successfully synthesized via photo-induced living cationic polymerization in the presence of diphenyliodonium hexafluorophosphate. Linear relationship between % conversion and number average molecular weight of resulting poly(3-MTHF) in the polymerization of 3-MTHF, carried out at -22$^{\circ}C$, indicates that the 5-membered cyclic oxonium ion, being responsible for the cationic propagation is stabilized by ion pall formation with hexafluorophosphate anion, supplied from the salt. The linear relationship between two parameters, mentioned above was also observed in the copolymerization of 3-MTHF with THF, carried out at 0 and -22$^{\circ}C$. The molecular structures including the copolymer composition and average molecular weight and its distribution is determined by reaction parameters such as monomer feed ratio and reaction temperature.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.108-114
• /
• 2002

Poly(butylene succinate) (PBS) prepolymers were prepared by the condensation polymerization of 1,4-butanediol (1,4-BD) and succinic atid (SCA) in the presence of titanium (VI) isoproxide(TPI) catalyst. The PBS prepolymers reacted with 1,4-BD or SCA to obtain hydroxyl or carboxylic acid group terminated PBS. High molecular weight linear or branched PBS was synthesized by a coupling reaction between hydroxyl and carboxylic acid group terminated PBS, or by a branching reaction between carboxylic acid group terminated PBS and glycerol as a branching agent. The weight average molecular weight of the prepared linear or branched PBS was in the range of 100,000-220,000. Both melting point and thermal stability of the high molecular weight linear and branched PBSs were somewhat higher than those of general PBS. From a tensile behavior by Instron test, modulus, tensile strength and elongation at break improved with increase in the molecular weight of the prepared PBS through the coupling or the branching reaction. In particular, the high molecular weight linear PBS had about 2.5 times higher value in modulus than the branched one.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.518-522
• /
• 1988

Polycarbosilane was synthesized from polydimethylsilane at 42$0^{\circ}C$, pyrolysis temperature with various times And IR, NMR, UV, and GPC were detected. Average molecular weight Mn was increased proportionally with the reaction time. Average molecular weight of polycarbosilane was about 700(n=20), which has chain structure and the product yield was 72%.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.5
• /
• pp.656-661
• /
• 2023

The aims of this study were to optimize the preparation of low-molecular-weight collagen using a proteolytic enzyme (alcalase) derived from the feet of Korean native chickens, and to characterize the process of collagen hydrolysis. Foreign bodies from chicken feet were removed using ultrasonication at 28 kHz with 1.36 kW for more than 25 min. The hydrolytic pattern and molecular weight distribution of enzyme-treated collagen from chicken feet were analyzed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and high-performance liquid chromatography, respectively. Ideally, chicken feet should be treated at 100℃ for 8 h to obtain a high collagen content using hot water extraction. The collagen content of the chicken foot extract was 13.9 g/100 g, and the proportion of low-molecular-weight collagen increased with increasing proteolytic enzyme concentration and reaction time. When treated with 1% alcalase, the average molecular weight of collagen decreased rapidly to 4,929 Da within 5 h and thereafter decreased at a slower rate, reaching 4,916 Da after 7 h. Size exclusion chromatography revealed that low-molecular-weight collagen peptides of approximately 1,000-5,000 Da were obtained after hydrolysis with 1% alcalase for 1 h.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.661-665
• /
• 2022

In this study, 2,5-dichlorobenzophenone was synthesized as a monomer using 1,4-dichlorbenzene, and subsequently, copolymers of benzoyl-p-phenylene and p-phenylene were prepared. The average molecular weight was improved using the low-molecular-weight polymer cutting method. The average molecular weight and glass transition temperature of the synthesized polymers were estimated. The as-prepared polymer was used as a hard coating material, and the coating was conducted on a poly(methyl methacrylate) plate. Furthermore, physical properties of the coatings, such as pencil hardness, adhesive strength, and abrasion resistance, were estimated. As the amount of p-phenylene in the copolymer increased, pencil hardness and abrasion resistance improved. The amount of p-phenylene in the copolymer can be increased to 30 mol% in order to increase the hardness of the coating, and the adhesive strength was insufficient for the copolymers with p-phenylene ratio greater than 35 mol%.