• 제목/요약/키워드: Average mode

검색결과 1,003건 처리시간 0.025초

Fast Macroblock Mode Selection Algorithm for B Frames in Multiview Video Coding

  • Yu, Mei;He, Ping;Peng, Zongju;Zhang, Yun;Si, Yuehou;Jiang, Gangyi
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권2호
    • /
    • pp.408-427
    • /
    • 2011
  • Intensive computational complexity is an obstacle of enabling multiview video coding for real-time applications. In this paper, we present a fast macroblock (MB) mode selection algorithm for B frames which are based on the computational complexity analyses between the MB mode selection and reference frame selection. Three strategies are proposed to reduce the coding complexity jointly. First, the temporal correlation of MB modes between current MB and its temporal corresponding MBs is utilized to reduce computational complexity in determining the optimal MB mode. Secondly, Lagrangian cost of SKIP mode is compared with that of Inter $16{\times}16$ modes to early terminate the mode selection process. Thirdly, reference frame correlation among different Inter modes is exploited to reduce the number of reference frames. Experimental results show that the proposed algorithm can promote the encoding speed by 3.71~7.22 times with 0.08dB PSNR degradation and 2.03% bitrate increase on average compared with the joint multiview video model.

시간평균 홀로그래픽 간섭계를 이용한 환형 평판의 자유 진동 연구 (Free Vibration Analysis of Annular Sector Plates Using Time Average Holographic Interferometer)

  • 나종문
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권3호
    • /
    • pp.353-361
    • /
    • 1998
  • The study on the vibration characteristics of annular sector plates is important for structural engineers. In this study the vibration modes and their natural frequencies of annular sector plates clamped along the inner circumferential edge are obtained by the time average holographic interferometer according to the varying sector angle. The experimental results agree well with those obtained by the numerical analysis. The vibration characteristics of annular sector plates shows great dependence on the sector angle. The radial nodal lines converge to the center of annular sector plate.

  • PDF

능동형 횡동요 감쇠장치의 성능에 관한 연구 (A Study on the Performance of Active Anti-Rolling Tank Stabilizer System)

  • 최찬문;안장영;이창헌
    • 수산해양기술연구
    • /
    • 제40권2호
    • /
    • pp.138-143
    • /
    • 2004
  • 제주대학교 실습선 아라호에 정착된 능동형 횡동요 감쇠장치의 성능에 관해 연구하기 위하여 33$^{\circ}$00‘.44”N, 125$^{\circ}$59’.88 ”E 위치에서 선박을 정지한 후, 횡동요 감쇠장치를 정지 (Passive A.R.T), 작동 (Active A.R.T)을 했을 때 경사계에 의한 횡동요각 및 종동요각, 풍속계에 의한 풍속의 변화와 그리고 선박이 항해 중에 감쇠장치의 작동을 정지(Passive A.R.T), 작동(Active A.R.T) 했을 때 의 능동형 횡동요 감쇠장치의 성능을 분석한 결과에 대해 요약하면 다음과 같다. 1. 선박이 정지했을 때 횡동요 감쇠장치를 정지, 작동한 경우 횡동요각의 평균진폭 (Average Amplitude of Roll) 은 각각 8.30$^{\circ}$, 4.37$^{\circ}$, 횡동요각의 유의진폭(Significant Amplitude of Roll $_{{\pi}{1/3}}$)은 각각 10.10$^{\circ}$, 5.30$^{\circ}$으로 나타났다. 2. 선박이 항해 중 일 때에는 횡동요각의 평균진폭 (Average Amplitude of Roll)은 각각 5.01$^{\circ}$, 4.36$^{\circ}$, 횡동요각의 유의진폭 (Significant Amplitude of Roll$^{\circ}$) 은 각각 5.50$^{\circ}$, 5.10$^{\circ}$으로 각각 나타났다. 3. 횡동요 감쇠장치는 선박이 정치했을 때에는 47.5%, 선박이 운항 했을 때는 12.7% 정도의 감쇠 효율을 보여서 정지했을 때 그 효율이 높은 것으로 나타났다. 4. 횡동요 감쇠 장치는 종동요(Pitching)에 대해서는 거의 영향을 미치지 않았다.

비소멸 모드 해석을 이용한 유전체 삽입 원통형 공동 공진기 하이브리드 공진 모드 구분 (A Hybrid Resonant Mode Identification using Non-decaying Mode Analysis in Dielectric Loaded Cylindrical Cavity Resonators)

  • 이원희;허정
    • 한국전자파학회논문지
    • /
    • 제14권6호
    • /
    • pp.655-662
    • /
    • 2003
  • 유전체 봉이 삽입된 원통형 공진기의 정밀한 필드 해석이 비소멸 모드와 컨투어 그래프 방법에 의해 제안되었다. 공진주파수들과 저차 모드들이 유전체 봉이 삽입된 원통형 공진기에 대해 계산되었다. 공진기의 설계를 위해 모드 차트가 제안되었다. 비소멸 모드 해석을 사용하여 하이브리드 모드들(TE, TM, HEM 모드)이 상세하게 해석되었고, 모드 차트를 완성하였다. 이론적 타당성은 실험에 의해 확인하였다. 이론과 실험 결과는 전반적으로 만족하였다. TE 모드, TM 모드, HEM 모드의 실험값과 이론값의 평균 오차는 각각 0.20 %, 0.14 %, 0.28 %이다.

APID공정 내 동절기 개량형 간헐포기 운전모드 적용 및 개발 (Development and Application of Modified Intermittently Aeration mode for Advanced Phase Isolation Ditch (APID) process at Winter Season)

  • 곽성근;안상우;정무근;박재로;박재우
    • 한국물환경학회지
    • /
    • 제25권6호
    • /
    • pp.872-878
    • /
    • 2009
  • Advanced Phase Isolation Ditch (APID) process was studied to develop economic retrofitting technology, for the plants where retrofitting of common activated sludge process is required. In this study, to develop and apply the modified intermittently aeration mode as process control conditions for treating municipal wastewater, a demonstration plant was installed and operated in the existing sewage treatment plant of P city. During this study, the average effluent $BOD_5$, SS, T-N, and T-P concentrations were 6.3, 4.5, 10.0, and 1.3 mg/L. The modified mode decreased the nitrification capability more than the conventional mode in the application period. Nitrate in the anaerobic condition can have a negative effect on biological phosphorus removal. In the decreasing nitrate levels, the modified mode increased the biological ability of removal phosphorus more than the conventional mode in this study. Therefore, newly developed APID process with modified intermittent aeration mode can be one of the useful processes for stable organic matter and nutrients removal.

윈치커튼식 비육돈사에서 습식공기정화기의 공기정화 효율 분석 (An Air Cleaning Efficiencies of Wet Air Cleaner in the Swine Finishing Winch Curtain Stall)

  • 오인환;김운걸;이한성
    • 한국축산시설환경학회지
    • /
    • 제14권2호
    • /
    • pp.75-80
    • /
    • 2008
  • High concentration of $NH_3$, $CO_2$, and lots of dust are found in modern densely raising stall system, as results, they provide a negative influence on animal and lamer health, and production ability. Therefore, it is necessary to keep clean the inside of stall air to increase the productivity. A wet type air cleaner has been developed to clean the stall air. The work principle is that the inside air are sucked through the fan, and the rotating discs make a water into a fineness spray and blows into the stall. The spray can take the dust, $NH_3$, and odor from the stall inside air and give back to the circulating water, which can be refreshed in 2 hours interval. In the Present study, we measured the $NH_3$, dust, odor, temperature and humidity in a swine stall that were installed two wet air cleaners with 700 fattening swine with on-mode and off-mode of wet air cleaners. In fall, the concentrations of $NH_3$ in off-mode stall were maximum 24 ppm and minimum 16 prm, and the average was 18.2 ppm. However in on-mode stall the $NH_3$ concentrations were maximum 7ppm and minimum 1ppm, and the average was 2.7ppm. The concentration of $NH_3$ in on-mode was 74% lower than off-mode stall. Odor was measured by olfactometer. In the off-mode stall, the odor unit was 3,800 OU/$m^3$, but in the on-mode stall the odor unit was 2,100 OU/$m^3$ Odor removal efficiency was about 45% in on-mode stall. The dust measure was divided into 3 categories, $PM_{10}$, $PM_{2.5}$ and $PM_{1.0}$. Whereas the $PM_{10}$ showed no significant differences between the tests, $PM_{2.5}$ and $PM_{1.0}$ in the fine particle range reduced remarkably in the on-mode.

  • PDF

H.264 인터모드 결정 방법 개선에 관한 연구 (A Study on an Improved H.264 Inter mode decision method)

  • 공재웅;정재진;황의성;김태형;김두영
    • 융합신호처리학회논문지
    • /
    • 제9권4호
    • /
    • pp.245-252
    • /
    • 2008
  • 본 논문에서는 H 264 인코딩 과정 중 모드 결정 및 움직임 예측 부분의 개선을 위한 새로운 방법을 제안한다. 제안한 방법은 H 264 모드 결정 과정 중 참조 프레임의 선택 과정 생략과 모드 결정 기준의 하나인 SAD 연산과정의 개선을 사용하여 인코딩 과정에서 수행되는 연산량을 감소시켜 인코딩 수행시간을 절감하는 방법이다. 제안하는 방법의 성능 평가를 위하여 H 264 표준에서 제공되는 QCIF 사이즈, YUV 4:2:0 포맷의 영상을 이용하여 실험 영상을 만들어 적용하였다. 본 논문에서 제안한 방법을 적용한 결과 알고리즘 1은 약간의 화질 열화를 보이며 수행시간은 10프레임씩 인코딩 하였을 때 평균 4.7% 감소하였으며, 알고리즘 2는 약 0.98dB정도의 화질 열화를 보이지만 인코딩 수행시간은 평균 9.6% 감소하였다.

  • PDF

공간 향상 계층에서 효율적인 화면 내 예측 모드 선택 방법 (An Efficient Intra Prediction Mode Decision for Spatial Enhancement Layer)

  • 명진수;박성재;오승준;심동규;김병규
    • 방송공학회논문지
    • /
    • 제12권5호
    • /
    • pp.491-502
    • /
    • 2007
  • 본 논문에서는 H.264/MPEG-4 AVC의 확장표준으로 제정된 SVC(Scalable Video Coding)에서 화면 내 예측 모드를 효율적으로 선택하는 방법을 제안한다. 제안 방법은 공간 향상 계층에서의 화면 내 예측 모드의 통계적 분석을 기반으로 매크로블록의 복잡도 특성에 따라 화면 내 예측 모드를 결정하고 Intra_BL 모드의 RD 값을 사용하여 Intra_BL 모드를 선 결정한다. 실험결과 제안한 방법은 화면 내 예측 모드의 부호화 시간을 54.67% 감소시키는 것에 반해 화질의 열화가 매우 작음을 보였다. 특히 낮은 QP 값에서는 미비한 PSNR의 감소와 약 0.011% 정도의 비트율 증가를 보였고, 높은 QP 값에서는 약 0.01dB 미만의 PSNR 감소와 0.249% 정도의 비트율이 증가하였다.

3차원 동적집속모드 체외충격파 기기를 이용한 족저근막염 치료의 유용성 (The Efficacy of Three-Dimensional Sweeping Mode Extracorporeal Shockwave Treatment for Plantar Fasciitis)

  • 임주애;이찬희;박재한
    • 대한족부족관절학회지
    • /
    • 제26권2호
    • /
    • pp.84-87
    • /
    • 2022
  • Purpose: This was a pilot study to examine the clinical usefulness of the newly developed three-dimensional sweep mode extracorporeal shockwave treatment (ESWT) in patients with plantar fasciitis. Materials and Methods: Three-dimensional sweep mode ESWT was performed once a week for 5 weeks in patients with plantar fasciitis who showed no improvement with the conventional conservative treatment. A 100-mm visual analogue scale (VAS) reading for pain from walking and at rest after walking were collected before the treatment and 8 and 16 weeks after the initial treatment. In addition, the Foot and Ankle Outcome Score (FAOS) and EuroQol-5-dimension (EQ-5D) scores before and 16 weeks after the treatment were evaluated. Results: VAS for pain for walking improved from 50.60±8.38 to 19.80±15.61 at 8 weeks after the initial treatment (p=0.008) and 9.80±9.62 at 16 weeks after the treatment (p<0.001). VAS for pain at rest after walking improved from 36.60±19.55 to 11.80±12.95 at 8 weeks after the initial treatment (p=0.052) and 8.80±8.87 at 16 weeks after the treatment (p=0.024). Preoperative FAOS increased from an average of 74.80±9.73 before the treatment to an average of 81.00±8.86 at week 16 after the procedure (p=0.49) and compared to pre-treatment levels, there was a decrease of one level in the anxiety/depression domain of the EQ-5D, post-treatment. Conclusion: The results of this preliminary study confirmed that the newly developed EWST with the smart forging sweep mode was effective in improving pain and function in plantar fasciitis.

ESPI를 이용한 광학식 정밀 계측 기술 (Optical technique of precision measurement using Electronic Speckle Pattern Interferometry)

  • 은재정;정영환;최평석;박해수
    • 융합신호처리학회논문지
    • /
    • 제4권4호
    • /
    • pp.40-46
    • /
    • 2003
  • 본 연구에서는 광학식 계측 기술인 ESPI에서 면외변위인 물체의 진동에 대한 분석을 수행하였다. 진동하는 물체는 고유한 노달 라인을 가지게 된다. 따라서 이를 분석함으로써 진동하는 물체에 대한 정보를 얻을 수 있다. 측정 물체로 스피커와 외팔보 평판을 사용하였으며, 이를 시간 평균 ESPI로 정성적으로 분석하였다. 본 연구의 실험 결과로 스피커에서는 진동 주파수 550Hz와 진폭 570mV에서 저차 모드 간섭무늬가 나타났으며, 진동 주파수 950Hz와 진폭 570mV에서 고차 모드 간섭무늬가 나타났다. 이러한 ESPI는 측정에 레이저를 이용하기 때문에 비파괴, 비접촉 검사이며, 높은 분해능을 가진다. 또한 레이저가 조사되는 영역이 측정 영역이 되므로 측정 물체의 크기에 제한되지 않는다.

  • PDF