• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1292-1294
• /
• 2002

In this study, the block section length of the given area has been analyzed to improve the headway which caused by the mixed operation of high speed trains and normal trains on the electrified railway of Dongdaegu to Busan. After establishing the average length of block section and the adjustable average length of block section of Dongdaegu to Busan, it is possible to perform the headway simulation regarding the signal system based on the established length. Although high speed trains as well as low speed trains including freight trains operate together, the experimental results indicate that the modification of the block section length shows the possibility of the improvement of headway.

• 한국어류학회지
• /
• 제36권1호
• /
• pp.20-29
• /
• 2024

삼세기(Hemitripterus villosus)는 새로운 양식 어종으로 대두되고 있으나, 자원량이 감소하고 있으며, 양식 어종에서 지속적인 문제로 나타나는 골격 기형에 대해 삼세기의 정상적인 골격발달 기준을 제시하고자 한다. 이 연구에 사용된 시료는 어획된 어미로부터 채란된 수정란을 부화시킨 자치어를 포르말린액에 고정한 뒤 Kawamura and Hosoya (1991) 염색법에 따라 염색하여 골격발달을 관찰하였다. 부화 직후 평균전장 13.65±0.71 mm (n=5) 일 때 부설골과 주상악골, 전상악골, 치골이 골화되기 시작하였고, 부화 후 65일째 평균전장 21.24±0.50 mm (n=5) 일 때 사골과 안상골이 골화하면서 두부가 완성되었다. 견대부는 부화 7일째 평균전장 14.61±0.52 mm (n=5) 일 때 쇄골, 주새개골, 관절골이 골화하기 시작하였으며, 부화 44일째 평균전장 18.15±0.61 mm (n=5) 일 때, 4개의 사출골이 골화되어 견대부가 완성되었다. 부화 10일째 평균 전장 14.80±0.65 mm (n=5) 일 때 척추골의 골화가 시작되었으며, 부화 후 54일째 평균전장 18.67±0.54 mm (n=5) 일 때 척추골 추체 39개가 골화하여, 부화 60일째 평균전장 20.25±0.45 mm (n=5) 일 때 척추골의 골격이 완성되었다. 이 연구는 삼세기 자치어의 골격발달에 대한 것으로 삼세기의 자치어 골격 기형의 기준과 기초자료 연구에 사용될 것이다.

• 한국축산시설환경학회지
• /
• 제8권3호
• /
• pp.171-176
• /
• 2002

Physical parameters of milk cow were measured to design and build RMS(Robotic Milking System) with a tape-measurer and body parameter measurer. The parameters are very important variables to design an RMS. For the working zone space of an RMS manipulator and the movement blunting of milk cow, an interval frame was installed on the stall bottom, and then cow's behavioral reactions were tested. The results from this study is summarized as follow. 1. On the general physical condition measurement, the maximum, minimum and average body length of cow which is related to the space that the manipulator could work into the RMS were 175cm, 144cm, and 163cm respectively. It appeared that the average distance between bottom and chest was 60cm. 2. The average length between fore teats, fore and hind teats and hind teats were 178mm, 150mm and 95mm respectively. It appeared that the average length between bottom and teat attachments was 544mm, and the average length between fore teats and tail-end was 331mm. 3. Although a cow kept a some extent length between hind legs for milking, it looked a stable pose. However, the cow kept a some extent distance between front legs for milking, it looked a unstable pose. Based on results of this test, an interval frame of stall bottom should be installed around the position which was located at its hind legs.

• 한국수산과학회지
• /
• 제51권2호
• /
• pp.170-177
• /
• 2018

Samples were obtained from broodstork in May, 1998, while naturally fertilized embryos were maintained and the process of skeletal development was observed from larvae and juveniles. Prelarvae immediately after hatching showed an average total length of $5.38{\pm}0.41mm$ (n=10), premaxillary and dentary were ossified, parasphenoid was ossified in the cranium, and centrum and caudal bone did not ossify. Prelarvae showed ossification with maxillary, articular and epihyal and branchiostegal rays of hyoid arch were ossified at 5 days after hatching with an average total length of $6.40{\pm}0.39mm$ (n=10). The vertebrae began to ossify in the direction of the tail, and neural spine began to ossify above the ossified vertebra. Postlarvae showed ossification of lateral ethmoid, parietal, and caudal skeleton in the cranium when the average total length was $7.30{\pm}0.12mm$ (n=10) in 8 days after hatching. At 22 days after hatching, postlarvae ossified maxillary in the cranium, and ossified endopterygoid and ectopterygoid, etc. in the palate, when the average length of $11.1{\pm}1.27mm$ (n=10). At 32 days after hatching, with the average length was $12.8{\pm}1.97mm$ (n=10), caudal skeleton had one additional epural bone ossification, resulting in ossification of a total of 3 epural bone to complete ossification of all spicules.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.695-710
• /
• 2018

Formation of a soil plug in an open-ended pile is a very important factor in determining the pile behavior both during driving and during static loading. The degree of soil plugging can be represented by the incremental filling ratio (IFR) which is defined as the change in the plug length to the change of the pile embedment length. The experimental tests carried out in this research contain 138 tests that are divided as follows: 36 tests for single pile, 36 tests for pile group ($2{\times}1$), 36 tests for pile group ($2{\times}2$) and 30 pile group ($2{\times}3$). All tubular piles were tested using the poorly graded sand from the city of Karbala in Iraq. The sand was prepared at three different densities using a raining technique. Different parameters are considered such as method of installation, relative density, removal of soil plug with respect to length of plug and pile length to diameter ratio. The soil plug is removed using a new device which is manufactured to remove the soil column inside open pipe piles group installed using driving and pressing device. The principle of soil plug removal depends on suction of sand inside the pile. It was concluded that the incremental filling ratio (IFR) is changed with the changing of soil state and method of installation. For driven pipe pile group, the average IFR for piles in loose is 18% and 19.5% for L/D=12 and 15, respectively, while the average of IFR for driven piles in dense sand is 30% and 20% for L/D=12 and L/D=15 respectively. For pressed method of pile installation, the average IFR for group is zero for loose and medium sand and about 5% for dense sand. The group capacity increases with the increase of IFR. For driven pile with length of 450 mm, the average IFR % is about 30.3% in dense sand, 14% in medium and 18.3% for loose sand while when the length of pile is 300 mm, the percentage equals to 20%, 17% and 19.5%, respectively.

• 한국가금학회지
• /
• 제22권1호
• /
• pp.1-6
• /
• 1995

A total of 514 birds were used to investigate the influence of body weight and shank length at hatch on the body weights at various ages in growing pheasant. Statistical model included the terms of hatch and sex as fixed effects and the two covariates of body weight and shank length at hatch. In this model, the effects of hatch and sex on the body weights at the age of 4, 8, 12, 16 and 20 wk, and the average daily gains from hatch to 8 wk and from 8 to 16 wk of age were highly significant(P<0.01). All the regression coefficients of body weights and average daily gains on the body weight at hatch were also significant(P<0.01). Their estimates were 3.05.7.21. 13.89, 15.18 and 15.33 for the body weights at 4. 8, 12, 16 and 20 wk of age ; 0.111 and 0.142 for the average daily gains from hatch to 8 wk, and from 8 to 16 wk of age, respectively. On the shank length, only the regression coefficients of the body weights at 4 and 8 wk of age and the average daily gains from hatch to 8 wk of age were significant(P<0.01). Results of this study suggest that body weight at hatch do significantly affect the body weights in the growing periods up to' the 20 wk of age, but the shank length at hatch influences the body weights only at early age.1)

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권4호
• /
• pp.363-370
• /
• 1996

The effect of breeding length of sire on genetic progress was examined in the Holstein dairy cattle population in Japan. Genetic progress was extimated by gene flow method. Breeding length of sires directly influences the replacement rates of sires and the selection intensity of sires because there are a fixed number of progeny tested young bulls per year. As breeding length of sires increased, rate of gene flow decreased and average proportions of genes deriving from selected animals had lower asymptotic values. When breeding length was short, average proportions of genes required a longer period to converge to asymptotic values. Changes of Rcow-sire's(sire to breed recorded cows) and Ncow-sire's(sire to breed non recorded cows) breeding length influenced not only transmission of their genes but also that of genes derived from all other selected animals. Irrespective of whether the discount rate was assumed to be 0 or 6%, longer term (${\geq}$ 20 years) expected total genetic improvement was maximized by a sire breeding length of five years. For shorter term assessment(10 years), genetic improvement was maximized by a sire breeding length of three years. There was a linear increase in the contribution of the sire to bulls pathway to the total genetic improvement, with increase in the term of assessment.

• 환경영향평가
• /
• 제22권3호
• /
• pp.241-254
• /
• 2013

The nutria(Myocastor coypus) that is originated from South America is a representative Invasive alien species in Korea. invasive alien species is one of the biggest causes for the loss of biodiversity and it may threaten the conservation and function of ecology as well as the welfare of mankind. Intense habitation has been made around the Nakdong River basin area that this study has analyzed the habitat density of nutria for the subject of 3 survey sites in the Nakdong River basin area. As a result of survey on habitation density in 2011 and 2012, under St.1 it was shown $2.01{\pm}0.21$/ha in 2011 and $0.69{\pm}0.55$/ha in 2012. Under St.2, it was shown $0.91{\pm}0.37$/ha in 2011 and $0.55{\pm}0.39$/ha in 2012. Under St.3, it was shown $5.31{\pm}0.72$/ha in 2011 and $3.99{\pm}2.31$/ha in 2012. The wet survey areas of St.1 and St.3 had shown relatively high habitation density compared to St. 2, the river survey area, and the average annual habitation density of the survey area was $2.74{\pm}2.29$/ha in 2011 and $1.74{\pm}1.18$/ha in 2012 that it has shown slightly reducing trend. As a result of measuring the morphology by capturing the habitation individuals, the average body length of adults is $92.23{\pm}9.41cm$, the length from the head to body for $53.90{\pm}5.15cm$, tail length for $38.33{\pm}4.83cm$, hind foot length for $13.82{\pm}1.00cm$, front foot length for $6.02{\pm}0.56cm$, and weight for $5.48{\pm}1.08kg$. As a result of comparing the types between genders, male showed a slightly higher figure in all parts compared to female and it showed significantly difference in total body length, head-body length, front foot length and total weight. As a result of analysis for each head-body length, other measured parts, weight and relativity for each measured part, all bodily part is shown to have the higher volume of correlations. The condition index of individuals in the survey area was shown in the average of $35.67{\pm}4.78$ with female for an average of $36.60{\pm}5.19$ and male for an average of $34.73{\pm}4.34$. The winter temperature in the southern area of Korea is considered for not greatly impacting on the habitation and development of nutria that, if there is no artificial control, it is considered to have certain concern of showing drastic breeding and territory expansion for the habitation group.

• 한국발생생물학회지:발생과생식
• /
• 제21권3호
• /
• pp.287-295
• /
• 2017

This study was conducted to observe egg and larvae morphological development of carp to obtain basic data for resource conservation and taxonomic research. Brood carp used in the research (total length 67.3-75.5 cm, average $71.0{\pm}3.45cm$) were bred in a circular rearing aquarium ($600{\times}300{\times}100cm$) using a running water system from January to July, 2015. Breeding water temperature was maintained at $23.0-25.0^{\circ}C$(average $24.0^{\circ}C$). Fertilized carp eggs were translucent and globular, and their size was 1.75-1.89 mm (average $1.82{\pm}0.06mm$). Blastoderms formed 10 min after fertilization and reached the two-cell stage 30 min after fertilization. Then, the embryo turned dark and exhibited melanophores, and blood started flowing from the heart across the egg yolk at 42 hrs and 50 min after fertilization. Hatching began 70 hrs and 26 min after fertilization larvae emerged through the egg membrane, starting from the head. The length of prelarvae immediately after hatching was 5.23-5.38 mm (average $5.31{\pm}0.11mm$) the mouth and anus were closed, and the pectoral fin was formed. Postlarvae at 18 days after hatching had a total length of 11.9-13.9 mm (average $12.9{\pm}1.40mm$), separate anal fin and back membranes, and fin ray. Juveniles fish at 35 days after hatching had a total length of 29.9-30.2 mm (average $30.1{\pm}0.13mm$), with the body covered with scales, and the same number of fin rays, color, and shape as their broodstork.

• 한국연소학회지
• /
• 제18권2호
• /
• pp.8-16
• /
• 2013

The flameless combustion has been considered as one of the promising combustion technology for high thermal efficiency, reducing NOx and CO emissions. In this paper, the effect of air and fuel injection condition on formation of flameless combustion was analyzed using three dimensional numerical simulation. The results show that the high temperature region and the average temperature was decreased due to increase of recirculation ratio when air velocity is increased. The average temperature was also affected by entrainment length. Generally mixing effect was enhanced at low entrainment length and dilution was dominated at high entrainment length. This entrainment length was greatly affected by air and fuel injection velocity and distance between air and fuel. It is also found that the recirculation ratio and dilution effect were generally increased by entrainment length and the recirculation ratio, mixing and dilution effect are the significant factor for design of flameless combustion system.