This study was conducted to evaluate the grit removal efficiency of tornado block-type vortex grit separator. Vortex grit separator was manufactured for this study, and it was characterized by the impeller and tornado block installed in separator. Impeller was installed to increase water velocity in the separator and tornado block was installed to increase the grit lifting efficiency. Pilot study was also conducted in A sewage treatment plant (STP) in Gyeonggi province from November 2003 to May 2004 (64 days). Major findings are as follows. 1. Impeller was proven to increase water velocity in the grit separator, especially in low flow rate. This influence will increase separation ratio of organics from grits, preventing those organics from sedimentation. 2. Sand (with 0.2~0.3mm size) removal efficiency was over 98 % and 96 %, at the flow rate of $500m^3/day$ and $750m^3/day$ under the condition that impeller rotation velocity kept at 15 rpm. Originally that grit separator was designed to have the capacity of $500m^3/day$. $750m^3/day$ was tried to investigate the performance of this type of grit separator under overload condition. Stable grit removal was still available to the extent of 150% of designed capacity. 3. It took less than 3 minutes for the grit separator to completely lift out 3 kgs of 0.2-0.3 mm sized, settled sand at the bottom to 2,060 mm high above water surface. But it showed the tendency to spend a little more time on lifting the grit as the grit size and the vertical height of the lift increased. 4. During experimental duration in A STP, it was found that the average amount of inlet grit was about 981 g/day (160~1,685 g/day) under $500m^3/day$ of operation condition, but it varied so severely during the experimental duration. After classification of discharged grit according to its size, grit with 0.3-0.42 mm size was found as largest part of output.
건설폐기물로부터 선별된 재생골재의 사용은 천연자원이 부족한 현실에 있어 많은 기회를 제공한다. 전 세계적으로 한정된 천연자원은 고갈되어가고 있으며 골재의 장거리 수송은 낮은 가격의 재생골재를 사용하는 것보다 더 비경제적 일 수 있다. 연간 한국에서 대략 7백만톤의 폐콘크리트가 발생하지만 이중 대략 2-3백만 정도만 재활용되고 있는 실정이다. 본 연구는 폐콘크리트로부터 얻어진 재생골재를 이용하는 방법에 대해서 제시하고자 한다. 재생콘크리트는 압축강도, 휨강도, 피로시험을 위해 w/c 40, 50, 60%에 대하여 제작했으며, 혼화재로는 플라이애쉬 (15%)를 사용하였다. 천연골재에 대한 재생골재의 대체율은 0, 25, 50%로 하였다. 이 연구의 목적은 재생골재 콘크리트의 피로수면과 천연골재 콘크리트의 피로수명을 비교하는데 있다. 본 연구를 통해 재생골재 콘크리트의 피로수명은 천연골재에 대한 재생골재의 대체율과 w/c에 상관성이 있음을 알 수 있었다.
Background Major problems with cervicoplasty by direct skin excision include the subjective nature of skin markings preoperatively and the confusing array of procedures offered. This technique incorporates curved incisions, resulting in a wave-like scar, which is why the procedure is called a "wave-plasty". Methods This prospective study includes 37 patients who underwent wave-plasty procedures from 2004 to 2015. Skin pinching technique was used to mark the anterior neck preoperatively in a reproducible fashion. Intra-operatively, redundant skin was excised, along with excess fat when necessary, and closed to form a wave-shaped scar. Patients were asked to follow up at 1 week, 6 weeks, and 6 months after surgery. Results The mean operation time was 70.8 minutes. The majority (81.3%) was satisfied with their progress. On a scale of 1 to 10 (1 being the worst, and 10 being the best), the scars were objectively graded on average 5.5 when viewed from the front and 7.3 when seen from the side 6 months after surgery. Complications consisted of one partial wound dehiscence (2.3%), one incidence of hypertrophic scarring (2.3%), and two cases of under-resection requiring revision (5.4%). Conclusions In select patients, surgical rejuvenation of the neck may be obtained through wave-like incisions to remove redundant cervical skin when other options are not available. The technique is reproducible, easily teachable and carries low morbidity and high patient satisfaction in carefully chosen patients.
모바일 컴퓨팅은 무선이동체 통신과 휴대 정보 터미널, 인터넷을 이용하여, 컴퓨터와 인체의 정보 기술을 효과적으로 연계시켜, when, where, who, 이동하면서 사용이 가능한 현대 기술의 중추 적인 역할을 제공하며 새로운 기술을 생리학적 측정으로 재고하고, 창조적으로 재건 할 수 있다. 특히, 고령화 사회에서 병적 징후들이 질병으로 발전되기 이전에 생체 변화를 유도하는 과정에 개입할 수 있는 가능성을 제공해 줄 수가 있다. 그러나 많은 파라미터가 데이터처리, 데이터의 기준화의 모호함, 데이터의 동시수집이 어려움 등을 들 수 있다. 따라서 본 연구에서는 모바일 컴퓨팅을 활용하여 시간적 제한요소를 배제하고, 정확한 분석이 되는 접근으로 분석이 타당하고 생체전기 신호를 바탕으로 하는 모바일 신경역학적 코드화 방법을 채택하여 시스템을 구현하여 실험한 결과, 생체 신호 모바일 분석 장치의 모델이 될 수가 있었다.
LNG / LNG-FPSO선박에 사용되는 안전밸브는 배관 시스템으로부터 유체를 방출하여 시스템의 압력을 일정하게 유지시키는데 중요한 역할을 한다. 이러한 안전밸브의 기능적 특성으로 인해 유출계수는 밸브의 성능 중 가장 큰 비중을 차지하며, 선급의 인정을 받기 위해서는 0.8이상의 유출계수가 요구되고 있다. 밸브 성능을 향상시키기 위해서 밸브 내부에서 발생하는 유동특성에 대한 정확한 이해가 필요함에도 불구하고 대부분의 밸브 설계의 경우 현장 작업자들의 경험과 실험에 의한 시행착오에 의존하고 있다. 본 논문에서는 안전밸브에 대한 유동해석을 통해 밸브 내부에 발생하는 압축성 유동현상을 고찰하였고, 실험과 해석에 의한 유출계수를 비교하여 유동해석의 타당성을 검증하였으며, 안전밸브를 지나는 공기의 질량유량을 예측하기 위한 유동해석 모델을 확립하였다.
장거리 고속 수중익 쌍동 여객선의 실선 시운전중에 실시한 응력 계측과 분석방법에 대하여 기술하고자 한다. 고속 쌍동선에 설치된 수중익의 중앙부 스트럿부재에 응력 게이지를 부착하여 항해중인 선체에 작용하는 양력과 파랑 변동하중에 의하여 나타나는 수중익 응력을 계측하였으며 이로부터 수중익의 부재력과 수중익에 작용하는 동적하중을 평가하였다. 계측된 수중익 응력의 크기 성분 분포로부터 선박의 예정 취항 해역에서 선박의 수명 동안 나타날 수 있는 최대 기대 응력값과 수중익 양력을 장 단기 해석을 수행하여 추정하였다. 본 계측의 분석에서 채택한 장 단기 해석에서는 서로 유사한 결과를 얻을 수 있었으며 추정된 수중익의 최대 기대 응력값을 수중익 재료의 항복응력과 비교하므로서 본 쌍동선 수중익 구조의 안전성을 검증하고 최대 기대 수중익 양력을 설계에 적용된 하중변수와 비교하므로서 설계 과정에서 채택한 하중 연수의 타당성을 확인하였다. 본 연구에서 제안된 계측 방법과 데이타 분석 과정은 실선계측 자료를 효과적으로 설계에 활용할 수 있게 한다.
본 연구에서는 태양광 고고도 무인항공기가 어떻게 태양광 에너지만을 이용해서 지상에서 이륙, 상승비행을 하여 임무고도인 18 km 지점까지 도달할 수 있는지에 관한 연구를 수행하였다. 주익면적 $35.98m^2$와 가로세로비 25의 글라이더 형태의 항공기가 기준 항공기 형상으로 사용되었다. 미국 나사의 공개 프로그램인 OpenVSP와 XFLR5을 사용하여 형상변수 및 양력계수와 항력계수를 계산하였으며, 태양광으로부터의 가용에너지와 상승비행에 필요한 에너지 균형을 통해 항공기의 상승비행을 예측하였다. 각 고도에서 비행속도를 최소화하여 최소시간 상승비행이 가능하도록 하였고 이륙시간에 따른 임무고도 도달까지의 총소요시간과 소모되는 에너지량을 예측하였다. 또한 편서풍과 비행속도에 의한 항공기의 이동거리를 계산하였다.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제34권4호
/
pp.475-479
/
2008
Aim: The aim of this study was to investigate the arterial arcade of maxillary sinus by determining the distance between the alveolar crest and the inferior border of the vessels in Korean population. Materials and methods: 76 patients and 87 available sinuses were determined by CT scan (Implagraphy, Vatech, Seoul, Korea). The distance between alveolar crest and inferior border of the vessel was determined considering the tooth area of posterior maxilla. Results: The lowest distance was observed on first molar area and the average distance is 16.9 mm. Discussions: it is important in sinus lift surgery that the vessels not to be damaged and that the anastomosis is situated in the lateral wall of maxillary sinus, which has to be exposed to gain access to the maxillary sinus. The knowledge of arterial arcade of maxillary sinus is important to perform the sinus floor elevation procedure effectively.
Constructing large-scale mat foundation mass concrete is increasing for the stability of building structure, because a lot of high rise building are being built in order to make full use of limited space. However, It is of increasing concerns that because limited placing equipments, available job-site and systems for mass concete placement in construction field do not allow to place great quantity of concrete at the same time in large scale mat foundation, consistency between placement lift can not be secured. And also, it is likely to crack due to stress caused by the difference of hydration heat generation time. To find out the solution against above problems, this study is to reconfirm the performance of normal concrete designed by mix proportion and super retarding concrete. The Fundamental test shows what happens if low heat proportioning and control method of setting time are applied at the job-site of newly constructed high rise building. The test result show that slump flow of concrete has been somewhat increased as the target retarding time gets longer, while the air content has been slightly decreased but this is no great difference from normal concrete. The setting time shows to be retarded as target retarding time gets longer, the range of retarding time increases. It is necessary to increase the amount of mix of super retarding agent in the proportion ration by setting curing temperature high since outdoor curing is about 6 hours faster than standard curing, which means the temperature of the concrete will be higher than the temperature of the surrounding environment, due to its high hydration heat when applying in a construction site. The compressive strength of super retarding concrete appears to be lower than normal concrete due to the retarding action in the early stage. However, as the time goes by, the compressive strength gets higher, and by the 28th day the strength becomes the same or higher than normal concrete.
드론이 농업 및 산업 운송 분야에 이용되기 위해서는 큰 탑재 하중과 긴 운용시간이 필요하다. 현재의 배터리 기술로는 탑재 하중과 체공 시간을 늘리는 데에 한계가 있고, 특히 현장에서 지속적인 운용이 필요할 때에 배터리의 충전 또는 교환이 번거로운 문제가 있다. 본 연구에서는 내연기관과 발전기, 그리고 배터리와 전기모터가 결합된 복합적인 추진기관을 사용하는 드론의 동력시스템을 최적화하는 과정을 제시한다. 운반과 운용의 제약을 고려하여 이륙중량 200kg 급의 기체를 선정하였다. 내연기관과 직접 연결된 2개의 주 로터가 기체 중량의 대부분을 담당하고, 내연기관으로 구동되는 발전기의 전력을 사용하는 4개의 모터가 자세제어를 담당하도록 시스템을 구성하였다. 드론의 에너지 흐름을 파악하여, 기존의 상용품 중 최적의 모터와 프로펠러를 선정하는 기법을 제시하고, 내연기관의 측정 데이터를 이용하여 최적의 운용 점과 기어비를 도출하는 기법을 제시한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.