• 복식
• /
• 제19권
• /
• pp.75-81
• /
• 1992

The clothing industry is going through very rapid and innovative automation in almost all processes from the initial design of clothing to the dispatch of the products to the retailer. Educational bodies in teaching clothing and textile techniques should offer courses that enable students to grasp the concepts and potential of automation so that they can confidently cope with further development when they enter the real world of the clothing and textile industry. The article suggests how and what to teach about automation and, gives an overview of the current state of automation in the field of clothing and textiles. What to Teach about Automation. $\cdot$What is the automation of the clothing industry\ulcorner $\cdot$The benefits of, and obstacles to automation in the clothing industry. $\cdot$How to automate the manufacturing process. $\cdot$Recent developments in automation machinery. $\cdot$How to Teach about Automation. $\cdot$Install available machinery at the educational institute and train the students. $\cdot$Practical 'in the field' work experience. $\cdot$Visite to textile machinery exhibitions and industrial sites. $\cdot$Using audio-visual methods. $\cdot$Participation in research projects to develop automatic systems.

• Journal of applied mathematics & informatics
• /
• 제26권5_6호
• /
• pp.911-923
• /
• 2008

The neural networks (NNs) simulation has been designed to simulate and predict the vortex wavelength ${\lambda}_x^*$, lateral vortex spacing ${\lambda}_y^*$, and normalized maximum vorticity at the vortex center near the wake of square cylinders with different corner radii. The system was trained on the available data of the three cases, although this data is very little. Therefore, we designed the system to work in automatic way for finding the best network that has the ability to have the best test and prediction. The proposed system shows an excellent agreement with that of an experimental data in these cases. The technique has been also designed to simulate the other distributions not presented in the training set and predicted them with effective matching.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.701-706
• /
• 2005

Pipes, tubes. and tubular sections with external transverse high fins have been used extensively for heating cooling, and degumidifying air and other gases. This work was performed to investigate an air side heat transfer charactieristics of minichannel with tension wound transverse fin. This estimate was confirmed conversion heat capacity the air side surface area enlargement and heat transfer charactieristics performed available inlet tube side hot water mass flux or outlet tube side air frontal air velocity. The most suitable tension wound transverse finned minichannel was measured extremely low in air side pressure drop and fin effectiveness $3.3\~4.4$. The pressure drop $0.9\~2.8Pa$ was ranged frontal air velocity $0.5\~1.2m/s$. It is also appeared that heat transfer in air side could be better conversion heat area which has been increased $330\%$ of heat capacity compared with the bare tube.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.5-12
• /
• 2003

In order to reduce the lead-time and cost, many useful methods have been applied to rapid prototyping (RP) in recent years. But cutting process is still considered as one of the effective RP methods that have been developed and currently available in the industry. It also offers practical advantages in aspects of precision and versatility. However, traditional 3-axis NC machining has some inherent limitations such as the restriction of tool accessibility and the complex setup. In this work, a new rapid prototyping system with high speed 5-axis machining of plastics has been developed to overcome those limitations. And cutting experiments were conducted to determine the design factors of the system and the cutting conditions of plastics. The architecture of developed system is described in detail and the successful application examples are presented.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.105-119
• /
• 2009

In this work, the structural response of thin-walled composite beams with pretwist angle is investigated by using a mixed beam approach that combines the stiffness and flexibility methods in a unified manner. The Reissner's semi-complimentary energy functional is used to derive the stiffness matrix that approximates the beam in an Euler-Bernoulli level for extension and bending and Vlasov level for torsion. The bending and torsion-related warpings induced by the pretwist effects are derived in a closed form. The developed theory is validated with available literature and detailed finite element structural analysis results using the MSC/NASTRAN. Pretwisted composite beams with rectangular solid and thin-walled box sections are illustrated to validate the current approach. Acceptable correlation has been achieved for cases considered in this study. The effects of pretwist and fiber orientation angles on the static behavior of pretwisted composite beams are also studied.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.197-204
• /
• 2005

The under-expanded jet discharged from a nozzle or an orifice has been extensively employed in industrial applications and aerospace technologies. A number of studies have been made to investigate the under-expanded jet structures such as Mach disk, barrel shock wave, jet boundary configuration, etc. In the current study, a computational work is performed to investigate the effect of non-equilibrium condensation of moist air on the under-expanded jet, which is discharged from a sonic nozzle. The results obtained are compared with an available experimental data. It is found that non-equilibrium condensation of moist air alleviates the oscillations of the under-expanded jet, and can increase Mach disk diameter, without changing the location.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.857-863
• /
• 2003

In rotating machinery, unbalance and misalignment are major concerns in vibration. Unbalance can be eliminated by balancing procedure to some degree. but little work has been done on the vibrations that occur in a misaligned rotor system. Currently, no generalized theoretical model based on a rotor system with flexible coupling is available to describe the vibrations caused by misalignment. As a part of systematic investigation on the misalignment, first of all, the study on flexible coupling with misalignment should be preceded. In this study, the geometry and reaction force and moment of a gear coupling with misalignment was investigated, also the theoretical model of a gear coupling with misalignment was presented by using the relationship between geometry and moment of gear coupling. It is expected that the proposed procedure can be applied to derive the theoretical model of other couplings.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.181-185
• /
• 1996

Rapid prototyping is becoming an increasingly importnat techniuqe involved in the design cycles of modern industry. The majority of the rapid prototyping systems currently available use photo-reactive resins and waxes as the raw materials. The models produced by these systems often have relatively poor mechanical and physical properties and as such have a limited application to the production of advance prototypes but are excellently suited to the manufacture of engineering prototyes. This work identifies the need to produed near production grade advance prototypes from a variety of metals and a novel prototyping process based on the techniques of selective laser sintering and conventional machining is proposed. The integration of a carbon dioxide laser and a conventional machine tool to create the opto-mechanical by multi-layer sintering and some of the problems involved are also discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.605-609
• /
• 1996

In order to ensure that the prototype corresponds as closely as possible to the serial part subsequently to be manufactured, the materials used for the prototye should, wherever possible, be identical to those used in production. In case of metallic parts, however, this demand is still not completely fulfilled by the available Rapid Prototyping techniques. Since only conventional manufacturing processes caan currentlybe used to produce metallic prototypes directly, these are extremely cost and labor intensive. For this reason, work is being undertaken worldwide to develop Selective Laser Sintering (referred to SLS) and Laser Generating for direct manufacture of metallic parts. In this paper the results of both process developments are reported. As the present results show, they have great application potentials in prototyping tools, especially molds and dies.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.17-22
• /
• 2004

A study for investigating the effects of the cutting conditions (radial depth of cut feed per tooth) and the number of tooth on the side wall of prismatically milled workpiece is described. This study is available not only for understanding the geometrical characteristics of the end milled side wall but also for finding the optimal cutting conditions. In this work, the side wall geometry was characterized by the straightness and the location of maximum peak point. Through this study, it was revealed that the geometrical characteristics of the end milled side wall are strongly related to the material removal per tooth and the number of tooth.