• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1972

The effects of limestone and wollastonite on an acid sulfate soil were studied. In addition, the effect of wollastonite was analyzed in terms of those due to calcium and to silica in the paddy field and in the laboratory with equivalent amounts of lime and wollastonite on a calcium basis. 1. Lime and wollastonite as liming materials were equally effective in neutralizing the soil acidity. 2. Lime, however was more reactive, raising the pH up to neutralization point in three days under waterlogged conditions at $25^{\circ}C$, in the lab study, and introduced alkali damage to transplanted rice seedlings showing marked restrictions of tillering in the field even though lime was applied two weeks before transplanting. On the other hand, wollastonite reacted very slowly, taking one week to two weeks to reach neutralization even when thoroughly mixed, and did not restrict the tillering. 3. Both lime and wollastonite effectively reduced the toxic aluminium in soil as well as in the soil solution but not always in the case of ferrous iron. However the reduction effect of the toxic substances in the experimental field was not so great as expected, because typical toxic symptoms were mild only. 4. Lime considerably increased the availability of silica in soil resulting in an increase of silica content in straw. Wollastonite released extra available silica itself resulting in a greater uptake of silica. 5. Increase of silica uptake by these materials was effective in reducing rate of infection of neck blast and resulted in higher rate of ripening, and in turn increased the paddy yield. 6. Application of either one significantly diminished the effect of the other. 7. Wollastonite markedly increased tillering in the early growing stage, but decreased the rate of effective tillers finally, resulting in about the same number of ears per hill at harvesting. 8. These liming materials appear to increase the number of grains per panicle slightly.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.701-710
• /
• 2013

This experiment was carried out to determine the forage production and soil characteristics in mixtures of barley and annual legumes at riverbed. The dry matter (DM) and total digestible nutrients (TDN) in barley and hairy vetch mixture were higher compared to other mixtures. Barley, single cropping was the highest in DM content. Comparing different mixtures, barley and crimson clover mixture was higher than other mixtures in DM contest. The crude protein (CP) content of barely and hairy vetch mixture was highest, but ether extract (EE) and TDN contents were lower than other mixtures. Barely and hairy vetch mixture significantly removed organic matter and phosphorus from riverbed through forage production (P<0.05). The total nitrogen (TN) of barley and hairy vetch mixture was highest because of high nitrogen fixation in riverbed soil. Single barley was highest in organic matter (OM) of soil. Comparing different mixtures, barley and crimson clover mixture was higher than other mixtures in OM contest. The available P2O5 of soil in barley and crimson clover mixture and barley and rape mixture were higher than others, and that of barley and hairy vetch was lower than other mixtures. The barely and hairy vetch mixture was highest in cation exchange capacity (CEC) content. Therefore barley and hairy vetch mixture is more suitable in forage mixtures because of high forage production and protein, and reduction of soil phosphorus in riverbed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.301-306
• /
• 1989

For the agricultural utilization of Korean forest land resources, which constitutes most of country, the distribution of environment and soil physico-chemical properties of establishable grass lands were clarified. The surveyed data were analized for the reasonable utilization and management of establishable grass land. The results were as follows ; 1. About 50.2% of the grass lands to be established were located under the 200m in altitude. The higher the altitude was, the more the organic matter content. 2. Tall type grass species such as Miscanthus purpurascens, Purple eulalia, and Themeda Japonica covered 71.3% of the natural vegetation in the soils of grass land to be established. 3. The extent of sandy and clayey soils which might be limited in the establishment of grassland was only 3.3%, meanwhile majority of the soils were in the favourable condition for grassland that is about 94% have more than 20cm in available soil depth and about 60.5% of the soils have less than 10% of gravels and stones in the soil profiles. 4. The chemical properties of the prearranged grassland soils were worse than the established grasslands, especially in the content of available $P_2O_5$. 5. The amount of fertilizer recommended for meadow were 286kg of nitrogen per hectare, 271kg of phosphorus, 224kg of potassium and 2040kg of calcium per hectare, but for grazing land were 201, 204, 136 and 1920kg/ha respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.2
• /
• pp.91-98
• /
• 2001

Scutellaria baicalensis G. was cultivated in plots of different soil textures which were sand loam(SL), loam(L) and clay loam(CL). Also three fertilizer conditions were used; non application (NA)treatment, rice straw manure(RSM) treatment and N-P-K, chemical fertilization(CF) treatment. The chemical-physical properties, such as organic matter, available phosphate, $K_2O$, CaO, clay contents and porosity ratio in CL plot with RSM application were the most proper in CL plot and RSM application for the culture of S. baicalensis plants. RSM had very high contents of total nitrogen, 2.25% and C/N ratios, 21.4. Thus the growth of shoot and root in loam plot with RSM treatment were greater compared to that of CL plot with NA treatment. Whereas, The highest baicalin, baicalein and wogonin contents in roots were found in CL plot with RSM treatment. There was significantly positive correlation between aerial and underground parts of plant, yield and contents of T-N, $K_2O$ but negatively correlated with the contents of baicalin, baicalein and wogonin in S. baicalensis roots.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.323-331
• /
• 2013

BACKGROUND: Liquid pig manure(LPM) is a useful resource if it is sufficiently fermented and utilized in the agriculture; it provides nutrients to soils, circulates organic materials and replaces chemical fertilizers(CF) with reasonable costs. Currently, there are not many trials in paddy field to continuously cultivate the crops in winter and summer season using LPM. METHODS AND RESULTS: When cultivating winter forage crops (Whole-crop-barley(WCB), Rye, Triticale, Italian ryegrass(IRG)) and summer feed corns in the rice field, CF was treated with $N-P_2O_5-K_2O$(winter forage crops: 120-100-100kg/ha, summer feed corn: 200-150-150 kg/ha), and subsequently, growth, yields, feed values and chemical properties of soil were investigated. LPM-applied areas in both winter and summer forage crops showed higher plant lengths and tillers than those of CF-applied areas, but the yield in CF-applied areas was higher than that of LPM-applied areas under continuous application of 2 years. Crude protein, neutral detergent fiber(NDF), acid detergent fiber(ADF) and total digestion nutrient(TDN) in feed values showed almost similar results between LPM and CF-applied areas. EC, organic matter, available phosphate and exchangeable cations of soils after the experiment increased in LPM applied areas, and especially, the contents of available phosphate and exchangeable sodium were high. CONCLUSION(S): Considering the above results, it was concluded that if LPM are properly utilized for continuous winter and summer cultivation of feed crops at paddy field, the cultivation costs could be decreased and be helpful to the stable production of domestic feeds.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.254-260
• /
• 1999

This experiment was carried out to evaluate the effect of improvement of soil physical property such as deep plowing and chiseling and diagnostic application of N, P, K fetilizers. Latex Coated Urea(LCU), compost, sillicate for increasing yielding and enchancing N-use efficiency in puddled-soil drill seeding of Rice. The soil physical properties, such as bulk density, hardness and porosity were increased by deep plowing and chiseling, as well as chemical propeties were highly enhanced soil productivity due to increase the content of organic matter, available $P_2O_5$ and K as compare with control. The amount of $NH_4-N$ in soil was highly increased by diagnostic fertilization and chiseling, while recovery rate of V fertilizer was the highest at LCU 80% applied with chiseling. The rice yield increased by 23% under the diagnositic application of LCU 80% applied base with chiseling.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.1
• /
• pp.16-23
• /
• 2003

Soil and water quality was monitored in the Nakdong River basin to assess the impact of different agricultural practices. From five catchments, soil samples were collected at three times during 1996 to 1998, and water samples were collected at twelve times on July during 1995 to 1999. The major agricultural practices were paddy and upland farming in three areas surveyed: Youngju, Goryung, and Milyang. Apple orchards were located along in the Imgo-Cheon catchment. Intensive vegetable farming in plastic fIlm house was practiced in the Habin-Cheon catchment. Total N contents, 0.04-0.32%, of paddy soils were low in comparison with those of upland, orchard, and plastic film house soils. Available phosphate($P_2O_5$) contents, $2-421mg\;kg^{-1}$, in plastic film house soils were higher than those in paddy soils. In plastic film house and upland soils, CEC of soils were high. The N concentrations in most of the streams were higher than $1.0mg^{-1}$, the standard of agricultural irrigation water. The P concentrations were above $1.0mg^{-1}$, the standard of agricultural irrigation water and were higher than the minimum level for eutrophication, $0.01-0.05mg\;L^{-1}$ in most of the streams. In conclusion, nutrients by agricultural activity could affect water quality of streams near the agricultural fields. Good water quality in streams can be maintained by proper management of agricultural fields and by decreasing application amount of fertilizers in agricultural fields.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.15-21
• /
• 2004

Objectives of this study were to monitor the distribution of heavy metals, to compare extractable heavy metal with total content and to investigate the relationships between soil physico-chemical properties and heavy metals in orchard soil. Sampling sites were 48 in Gyeonggi, 36 in Gangwon, 36 in Chungbuk, and 44 in Chungnam, Soils were collected farm form two depths, 0 to 20 and 20 to 40 cm (here after referred to as upper and lower layers) from March to May in 1998. Total contents of heavy metal in soils were analyzed by ICP-OES after acid digestion ($HNO_3$:HCl:$H_2O_2$) whereas extractable contents were measured after successive extraction of 0.1N-HCl, 0.05 M-EDTA, and 0.005 M-DTPA. Mercury was analysed by mercury atomizer. The average contents of Cd Cu, and Pb in the extractant with 0.1N-HCl at upper layer were 0.080, 4.23, and 3.42 mg/kg, respectively. As content in the extractant with 1N-HCl was 0.44 mg/kg, and total contents of Zn, Ni and Hg were 78.9, 16.1, and 0.052 mg/kg, respectively. The ratios of concentrations of heavy metals to threshold values (Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/ke in Soil Environmental Conservation Act in Korea (2001) were low in the range of $1/2.5{\sim}1/76.9$ in orchard soils. The ratios of extractable heavy metal to total content ranged $5.4{\sim}9.21%$ for Cd, $27.9{\sim}47.8%$ for Cu, $12.6{\sim}21.8$% for Pb, $15.8{\sim}20.3%$ for Zn, $5.3{\sim}6.3%$ for Ni, and $0.7{\sim}3.6%$ for Zn, respectively. Cu and Pb contents in 0.05 M-EDTA extractable solution were higher than those in the other extractable solution. Total contents of Cd, Ni and Ni in soils were negatively correlated with sand content but positively correlated with silt and clay contents. Ratios of extractable heavy metal to total content were negatively correlated with clay content but ai and Ni contents were positively correlated with soil pH, organic matter, and available phosphorous. Therefore, the orchard soil was safe because the heavy metal contents of orchard soil were very low as compared to its threshold value in the Soil Environmental Conservation Act. However, it need to consider the input of agricultural materials to the agricultural land for farming practices for assessment of heavy metals.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.95-107
• /
• 2020

The purpose of this study is to provide the basic data by analyzing and analysing the Growth Conditions of old Trees in Yangdong village. This study investigated about the conducted on tree information, soil information, and tree health. The result are as follows. The trees information in Yangdong Village consists of Juniperus chinensis, Salix chaenomeloides, Salix pseudolasiogyne, Celtis sinensis, Zelkova serrata, Gleditsia japonica, and Gleditsia sinensis trees, The range of height was 4.0~17.0m, and the diameter was 0.51~1.34m, Juniperus chinensis trees of No.17 was most large. In the results of soil analysis, there showed that acidity was pH4.1~6.3, hardness of 5~48mm, organic matter content of 21.2~29.1g/kg, electrical conductivity(EC) of 0.34~1.76dS/m, available P₂O₅ of 79.8~451.6mg/kg, exchangeable K of 0.22~1.71cmol+/kg, exchangeable Ca of 4.98~7.44cmol+/kg, exchangeable Mg of 0.67~2.19cmol+/kg, exchangeable Na of 0.19~1.04cmol+/kg and cation exchange capacity(C.E.C) of 7.23~13.02cmol+/kg. As a result, the highest number of tree health levels is 8 of 11trees of Celtis sinensis, 2 of 7trees of Zelkova serrata, and 3 of Gleditsia sinensis, and 13 of 30 trees of health levels, The Older trees with high infection, spoil and hollowed part were the remaining trees except for the healthy part. Relatively, more than half of the number of targets is infected, decay, and the hollowed site, and it is necessary to perform surgery on the damaged area. In addition, preservation and protection measures should be implemented by supplying root nutrients for trees, controlling nutrients in the body to prevent secondary and tertiary damages that cause the infection site to metastasize to the health site, In order to continually monitor the trees, measures to improve the location environment and management of the trees should be sought.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.257-258
• /
• 2004

The dose from radionuclides released from high-level radioactive waste (HLW) glasses as they corrode must be taken into account when assessing the performance of a disposal system. In the performance assessment (PA) calculations conducted for the proposed Yucca Mountain, Nevada, disposal system, the release of radionuclides is conservatively assumed to occur at the same rate the glass matrix dissolves. A simple model was developed to calculate the glass dissolution rate of HLW glasses in these PA calculations [1]. For the PA calculations that were conducted for Site Recommendation, it was necessary to identify ranges of parameter values that bounded the dissolution rates of the wide range of HLW glass compositions that will be disposed. The values and ranges of the model parameters for the pH and temperature dependencies were extracted from the results of SPFT, static leach tests, and Soxhlet tests available in the literature. Static leach tests were conducted with a range of glass compositions to measure values for the glass composition parameter. The glass dissolution rate depends on temperature, pH, and the compositions of the glass and solution, The dissolution rate is calculated using Eq. 1: $rate{\;}={\;}k_{o}10^{(ph){\eta})}{\cdot}e^{(-Ea/RT)}{\cdot}(1-Q/K){\;}+{\;}k_{long}$ where $k_{0},\;{\eta}$ and Eaare the parameters for glass composition, pH, $\eta$ and temperature dependence, respectively, and R is the gas constant. The term (1-Q/K) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_{0},\;{\eta}\;and\;E_{a}$ are the parameters for glass composition, pH, and temperature dependence, respectively, and R is the gas constant. The term (1-Q/C) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_0$, and Ea are determined under test conditions where the value of Q is maintained near zero, so that the value of the affinity term remains near 1. The dissolution rate under conditions in which the value of the affinity term is near 1 is referred to as the forward rate. This is the highest dissolution rate that can occur at a particular pH and temperature. The value of the parameter K is determined from experiments in which the value of the ion activity product approaches the value of K. This results in a decrease in the value of the affinity term and the dissolution rate. The highly dilute solutions required to measure the forward rate and extract values for $k_0$, $\eta$, and Ea can be maintained by conducting dynamic tests in which the test solution is removed from the reaction cell and replaced with fresh solution. In the single-pass flow-through (PFT) test method, this is done by continuously pumping the test solution through the reaction cell. Alternatively, static tests can be conducted with sufficient solution volume that the solution concentrations of dissolved glass components do not increase significantly during the test. Both the SPFT and static tests can ve conducted for a wide range of pH values and temperatures. Both static and SPFt tests have short-comings. the SPFT test requires analysis of several solutions (typically 6-10) at each of several flow rates to determine the glass dissolution rate at each pH and temperature. As will be shown, the rate measured in an SPFt test depends on the solution flow rate. The solutions in static tests will eventually become concentrated enough to affect the dissolution rate. In both the SPFt and static test methods. a compromise is required between the need to minimize the effects of dissolved components on the dissolution rate and the need to attain solution concentrations that are high enough to analyze. In the paper, we compare the results of static leach tests and SPFT tests conducted with simple 5-component glass to confirm the equivalence of SPFT tests and static tests conducted with pH buffer solutions. Tests were conducted over the range pH values that are most relevant for waste glass disssolution in a disposal system. The glass and temperature used in the tests were selected to allow direct comparison with SPFT tests conducted previously. The ability to measure parameter values with more than one test method and an understanding of how the rate measured in each test is affected by various test parameters provides added confidence to the measured values. The dissolution rate of a simple 5-component glass was measured at pH values of 6.2, 8.3, and 9.6 and $70^{\circ}C$ using static tests and single-pass flow-through (SPFT) tests. Similar rates were measured with the two methods. However, the measured rates are about 10X higher than the rates measured previously for a glass having the same composition using an SPFT test method. Differences are attributed to effects of the solution flow rate on the glass dissolution reate and how the specific surface area of crushed glass is estimated. This comparison indicates the need to standardize the SPFT test procedure.