• 전기학회논문지P
• /
• 제56권2호
• /
• pp.109-114
• /
• 2007

This paper summarize about the auxiliary electrode measured a ground resistance. The method to measure a ground resistance is the fall-of-potential method to using an auxiliary electrode. And an auxiliary electrode must be set up on the ground. Today it is so difficult to set up the auxiliary electrode on the ground because of many concrete building and many paved roads. So this paper is regarding a trust analysis of the ground resistance measurement by the substitute auxiliary electrode. It substituted a iron structure around the building, a neutral line multiplex ground to earth, a wire net for auxiliary electrode. This information is confirmed bv compared with the measurement value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.85-87
• /
• 2007

This paper summarize about the auxiliary electrode measured a ground resistance The method to measure a ground resistance is the fall-of-potential method to using an auxiliary electrode. And an auxiliary electrode must be set up on the ground. Today it is so difficult to set up the auxiliary electrode on the ground because of many concrete building and many paved roads. So this paper is regarding of the ground resistance measurement by the substitute auxiliary electrode. It substituted a iron structure around the building, a wire net for auxiliary electrode. This information is confirmed by compared with the measurement value.

• 한국지진공학회논문집
• /
• 제25권3호
• /
• pp.93-102
• /
• 2021

The dynamic characterization of a three-story auxiliary building in a nuclear power plant (NPP) constructed with a monolithic reinforced concrete shear wall is investigated in this study. The shear wall is subjected to a joint-research, round-robin analysis organized by the Korea Atomic Energy Research Institute, South Korea, to predict seismic responses of that auxiliary building in NPP through a shake table test. Five different intensity measures of the base excitation are applied to the shaking table test to get the acceleration responses from the different building locations for one horizontal direction (front-back). Simultaneously to understand the global damage scenario of the structure, a frequency search test is conducted after each excitation. The primary motivation of this study is to develop a nonlinear numerical model considering the multi-layered shell element and compare it with the test result to validate through the modal parameter identification and floor responses. In addition, the acceleration amplification factor is evaluated to judge the dynamic behavior of the shear wall with the existing standard, thus providing theoretical support for engineering practice.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.567-578
• /
• 2018

The purpose of this study was to evaluate condensation prevention for condensation vulnerable areas around built-in furniture of apartment buildings by applying auxiliary heating device. Recently, the condensation and mold problems of apartment buildings has been growing due to high insulation and high air-tightness performance for energy saving. Condensation at built-in furniture were generally found in winter at the of furniture's back panels, adjacent surfaces of wall, floor and ceiling. These problems are related to the weather conditions and indoor room conditions in winter. To solve these problems, auxiliary heating device was developed and could be installed. The aim of paper is to analyze the thermal environment around the built-in furniture which were applied and not applied auxiliary heating device in winter. In results, it was possible to increase the surface temperature of vulnerable areas around built-in furniture by applying auxiliary heating device, and to minimize condensation problems by using the minimum device.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.463-469
• /
• 2003

2개의 보조건물(PAB와 SAB)이 있는 KSNP의 경우, 단일 보조건물만을 고려하고 있는 PWR-GALE 코드를 이용하여 기체배출량을 평가하기에는 한계가 있다. 본 논문에서는 기존 PWR-GALE 코드는 그대로 이용하면서 KSNP의 설계특성을 반영하기 위하여 일부 입력변수를 수정해서 보조건물 옥소방사능 배출량을 사실적으로 평가할 수 있는 방법론을 개발했다. 울진 5,6 호기의 설계자료를 이용하여 기존 평가방법론과 개선된 평가방법론을 적용해 사례연구를 실시하였다. 기존 평가방법으로 보조건물 옥소의 유효제거효율을 산출한 결과 42%가 나왔으나 PAB와 SAB의 옥소핵종 농도가 동일하다고 가정을 만족하지 못하는 단점이 있다. 개선된 평가방법으로 옥소의 유효제거효율을 산출한 결과 88%가 나왔다.

• 한국도서관정보학회지
• /
• 제24권
• /
• pp.449-484
• /
• 1996

The purpose of this study is to analyze the structural model of classification, to compare enumerative schemes with faceted schemes and finding the facted schems used in the Dewey Decimal Classification. The Structural model of classifications can be divided to enumerrative schemes and facted schemes(analytico-synthetic schemes). Enumerative schemes represent the various kind of subject in different ways and have to not only list all existing combinations of subjects but also any of potential subjects. Faceted schemes is the decomposition of concepts into all possible characteristics which are known as facets. DDC was originally created as enumerative, but over 20 editions has moved increasing towards synthetic features such as the add instructions, and the seven auxiliary tables. Many DDC class numbers found in the Schedules may be subdivied by another number(or part of it) that has been drawn from the Schedules or auxiliary tables. This process of subdividing class numbers is called number building and it can be done only when there are number building instruction in the Schedules or Tables.

• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.235-255
• /
• 2014

This paper mainly introduces recently developed technologies pertaining to the design and implementation of Active Mass Damper (AMD) control system on a high-rise building subjected to wind load. Discussions include introduction of real structure and the control system, the establishment of analytical model, the design and optimization of a variety of controllers, the design of time-varying variable gain feedback control strategy for limiting auxiliary mass stroke, and the design and optimization of AMD control devices. The results presented in this paper demonstrate that the proposed AMD control systems can resolve the issues pertaining to insufficient floor stiffness of the building. The control system operates well and has a good sensitivity.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.553-564
• /
• 2013

This study evaluates the local damage of a turbine in an auxiliary building of a nuclear power plant due to an external impact by using the LS-DYNA finite element program. The wall of the auxiliary building is SC structure and the material of the SC wall plate is high manganese steel, which has superior ductility and energy absorbance compared to the ordinary steel used for other SC wall plates. The effects of the material of the wall, collision speed, and angle on the magnitude of the local damage were evaluated by local collision analysis. The analysis revealed that the SC wall made of manganese steel had significantly less damage than the SC wall made of ordinary steel. In conclusion, an SC wall made of manganese steel can have higher effective resistance than an SC wall made of ordinary steel against the local collision of an airplane engine or against a turbine impact.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1781-1788
• /
• 2022

The containment building Kori Unit 1 may require sequential steps for full decommissioning. This study assumes that the containment building is to be used as an auxiliary building that handles nuclear power systems and materials during decommissioning before conversion into a greenfield. Through the derivation of guidelines and dose evaluation, it was confirmed whether the radiation workers were satisfied with the ALARA decision. The specific modeling of the external radiation exposure was performed based on the facility investigation procedures. The external radiation specific derived concentration guideline levels (DCGLs) for radiation workers in containment building were obtained using the RESRAD-BUILD code and were applied to the VISIPLAN 3D ALARA Planning Tool code to calculate the working dose and check worker safety. The derivation of site-specific and realistic DCGLs and dose evaluation via 3D modeling can contribute to the scenario development for the decommission and remediation of containment building.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.194-197
• /
• 2017

항공기 엔진과 보조동력장치는 안전성에 기반하여 감항성 기준과 인증절차에 따라 반드시 인증을 받도록 규정하고 있다. 항공기 엔진은 형식증명을 통하여 설계와 제작에 대한 적합성을 입증하여야 하며, 보조동력장치의 경우는 기술표준품 표준서에서 요구하고 있는 최소성능표준(Minimum Performance Standards)에 대하여 설계와 생산에 대한 적합성을 입증하여야 한다. 우리나라는 항공기 엔진에 대한 항공기기술기준으로 Part 33을 제정하고 있으나, 보조동력장치에 대한 인증 기준은 고시되지 않은 상태이다. 항공기 엔진과 보조동력장치의 개발과 인증체계 구축은 우리나라 항공 산업을 한단계 향상시킬 수 있는 계기가 될 것이다. 이에 본 논문에서는 항공기 엔진 및 보조동력장치에 대한 인증 현황을 통하여 개선 방안을 제시하고자 한다.