• 오토저널
• /
• 제9권5호
• /
• pp.6-18
• /
• 1987

Owing to remarkable development in automotive industry, vehicle performance comes close to perfection and guarantee of stability is getting emphasized in accordance with high speed trend in vehicle. In recent years, the utilization of automatic test method for research and development of automotive brake system is being propelled actively, which pursue whole automatic control from simple measurement to data acquisition. The main subject of this paper is to make a brief explanation on Micro computer controlled Automatic Test Method for Automotive Brake System which makes it possible to test with high accuracy and speed.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.181-189
• /
• 2018

Polymer electrolyte membrane fuel cell (PEMFC) system receives great attention as a promising power device for automotive applications. For the wide commercialization, the efficiency and performance of automotive PEMFC system should be further improved in terms of total system (stack and balance of plant [BOP]). Air supply module, which is a major part of the BOP, greatly affects the efficiency of automotive PEMFC system. In this paper, a systematic study on the low-pressure automotive PEMFC system was made in an attempt to enhance the net system efficiency. This study mainly presents an investigation of the effect of blower configuration (1-blower and 2-blower) on the net system efficiency of automotive PEMFC system. For this purpose, the effect of operating pressure and cathode stoichiometry on the system efficiency was investigated with stack temperature under the fixed net system power condition. Results indicate that 1-blower system is better in system efficiency over 2-blower system under an air stoichiometry of 2. However, 2-blower system is better in system efficiency under an air stoichiometry of 3. The simulation results show that the optimum operating strategy needs to be established for various blower system configurations considering blower performance maps.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.243-245
• /
• 2009

In recent years, a development of automotive embedded systems called Intelligent Vehicle are used for control and communication with CAN protocol. But as various devices and protocols are developed for Vehicle communication and control, it becomes difficult to manage the systems that contain limitation of bandwidth and various control requirement. To solve these problems, we introduce a research of automotive embedded systems which is considered the automotive real time operating system, automotive communications, and control systems.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.184-191
• /
• 2004

In this study, an inspection system for automotive parts using machine vision has been developed and presented. The system is comprised of six analog CCD cameras, frame grabber, and mechanism that loads the automotive parts to the system for the inspection. An Image processing algorithm for detecting eight different types of defects of oil-seals are developed, and the effectiveness of the algorithm is experimentally verified. Inspection process is completed in 1 second with acceptable accuracy. It is envisaged that this inspection system will have a wide application in the automotive part manufacturing industry in the future.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.44-51
• /
• 2011

Polymer Electrolyte Fuel Cells (PEFCs) operate in wide-range changes in temperature, humidity, and electric current for automotive applications. In order to operate automotive PEFC efficiently, optimal air supply is required to adjust to these changes. This paper presents an air-supply optimization process that consists of experiments, modeling of the PEFC system, and optimization. The objective is to establish an air supply suitable for the required power for PEFC system and optimized with a Lagrange multiplier. Our simplified PEFC system model is used as a constraint for optimization problem. The result of this paper presents that efficient operation of PEFC system can be achieved by air-supply optimization.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.196-203
• /
• 2003

This study was performed to design the optimal block type expansion valve through analyzing the characteristics of the block type expansion valve in automotive air conditioning system using HFC-134a. Because an alternative refrigerant (HFC-l34a) is being used instead of CFC-12 for automotive air conditioning system, newly designed air conditioning components are necessary due to changes in characteristics. The performance tests were accomplished through the test bench, that is manufactured based on the study. And then it was carried out to measure the variation of temperature and pressure at each part of the air conditioning system according to the compressor speed.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권7호
• /
• pp.339-344
• /
• 2016

자동차 소프트웨어의 복잡성이 높아짐에 따라 안전문제가 중요해졌다. 그래서 이를 해결하기 위하여 Automotive SPICE 프로세스가 제안되었다. Automotive SPICE 프로세스 수행을 위해서는 통합된 관리 체계와 도구가 필요하다. 하지만 중소기업의 경우에는 인원과 자본이 부족하여 통합된 관리체계와 도구를 도입하기 힘들다. 따라서 Automtovie spice 최소 요구사항을 준수하는 HIS scope 항목을 목표로 해야 한다. 본 논문에서는 Automotive HIS scope 항목을 수행하는데 필요한 오픈 소스 기반 프로세스 관리 도구 시스템을 제안한다. 제안된 시스템으로 Automotive SPICE HIS scope 항목을 수행할 수 있으며, 수행 결과를 통하여 Automotive SPICE HIS scope 항목을 만족하는 것을 보였다.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.183-189
• /
• 2003

The study of the automotive noise reduction has been concentrated on the reduction of the automotive engine noise because the engine noise is the major cause of automotive noise. However, many studies of automotive engine noise led to the interest of the noise reduction of the exhaust and intake system. Recently, the active control method is used to reduce the noise of an automotive exhaust and intake system. It is mostly used the LMS(Least-Mean-Square) algorithm as an algorithm of active control because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an Active Noise Control system. However, the convergence performance of LMS algorithm went bad when the FXLMS algorithm was applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to solve this problem, the modified FXLMS algorithm is proposed. In this study, the improvement of the control performance using the modified FXLMS algorithm under rapidly and suddenly accelerated driving conditions was identified. Also, the performance of an active control using the LMS algorithm under rapidly accelerated driving conditions was evaluated through the theoretical derivation using a chirp signal to have similar characteristics with the induction noise signal.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.49-58
• /
• 2006

In the respect of the environmental protection viewpoint, $CO_2$ may be one of the most attractive alternative refrigerants for an automotive air-conditioning system. For the development of control algorithm of a $CO_2$ automotive air-conditioning system, characteristics of a $CO_2$ refrigerant should be considered. The high-side pressure of a $CO_2$ system should be controlled in order to improve the system efficiency. In this study, dynamic physical models of a $CO_2$ system were developed and dynamic behaviors of the system were predicted by using these models. Control algorithms of a $CO_2$ system were also developed and the effectiveness of these algorithm was verified by using dynamic models.

• 오토저널
• /
• 제26권1호
• /
• pp.76-82
• /
• 2004

In this paper, the trend of quality management system that suppliers in the automotive industry are adopting, the classification system of suppliers and car manufacturers requirements for quality are described. Due to the complexity of the requirements for quality, the introduction of an active quality management system which can meet all conditions is a difficult task. Thus, to cope with this difficulty, this paper shows the optimal requirements that suppliers have to consider when they are introducing quality management system and the discriminated strategies to assure parts quality by supplier model.