• Journal of Welding and Joining
• /
• 제20권2호
• /
• pp.95-101
• /
• 2002

After high power lasers are avaliable in the commercial market, the number of applications of the laser welding has been increased in manufacturing industries. Although the tailored blank laser welding of butt jointed steel sheets is well known recently in the automotive industries, the lap joint laser welding is a new technology to the automotive manufacturing people as well as the design people. But the deep penetration laser welding seems to be preferred to the partial penetration welding for the lap joint welding in the automotive manufacturers because the partial penetration is a serious deflect for the butt joint. In this study, the feasibility of partial penetration welding fur the lap joint $CO_2$ laser welding was studied fur the 1mm thick 390MPa high strength steel sheets for automotive bodies. The process window of the lap joint partial penetration welding was obtained from experiments with the gap size and the welding speed as process parameters. The partial penetration welding was found excellent on the basis of the tensile shear strength and sectional geometry. The bead width, input energy Per volume, tensile-shear strength, deformation energy and the sectional geometries after tensile-shear tests of partial penetration welded specimens are compared with those of full penetration welded specimens with a series of gaps and welding speeds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.451-453
• /
• 1998

Global competition of automotive market, affordable prices of electronic components, and tougher regulations on emission, fuel economy, and safety become the major reason that automotive industries rapidly employ a large number of electric and electronic systems. Considering that the application of electronic technologies for automobile is increasing at a rapid rate, it would be worthwhile to evaluate the trend of the uses of major electric and electronic systems for the 21st century vehicle. The major technology will be leaded by 32/64-bit microcontroller, on-chip flash memory, hybrid ASICs, IGBT, and smart sensors.

• 접착 및 계면
• /
• 제12권1호
• /
• pp.34-42
• /
• 2011

자동차용 도장시스템으로 새롭게 대두되고 있는 roll coating process는 비친환경적이면서도 생산성이 떨어지는 기존의 습식도장공정을 완전 대체할 수 있는 기술로 알려져 있다. Pre-painted 강판 시스템에서 도막 유연성 및 강도 등의 구현을 위하여 경화거동뿐만 아니라 내식성 및 성형가공성, 유변학적 거동 등의 평가가 매우 중요하다. 본 연구에서는 pre-painted system에 적용하기 위하여 polyester 수지를 수산화기 및 분자량 변성을 통하여 합성한 후, 경화거동 및 딥드로잉, 인장력, 유변특성 등을 평가하였다. 40 (mg KOH-/mol)정도의 수산화기를 갖는 N-0375-40 system이 유연성 및 도막강도, 경화거동 등의 가장 우수한 물성을 나타내었다.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.74-79
• /
• 2010

Automotive industries are interested in material development with low weight and recycling. Grommet is made from EPDM at rubber and used as an automotive component. The nonlinear material properties of rubber are important to predict the behaviors of rubber product. This study concerns material property test to achieve stress-strain curve. Curve fitting is carried out to obtain the nonlinear material constant. The nonlinear material constants of rubber are used for the nonlinear finite element analysis. The results of finite element analysis is executed to predict the behavior property of grommet.

• 한국CDE학회논문집
• /
• 제12권6호
• /
• pp.452-460
• /
• 2007

To achieve rapid developments and cost savings in manufacturing industries including automotive die shops, new paradigm and its supporting systems of information managements through total product life cycle are needed for concurrent and collaborative engineering. For manufacturing of automotive press dies, integrated and efficient managements of PPR information including product, manufacturing process and resource are essential. In this paper, we introduce a PLM approach to achieve engineering collaborations in product development and production of automotive dies. To prove concepts and benefits of PPR information managements, we implement new business workflow and detail procedures, PPR information management system and other related applications. By PPR information managements in PLM, improvements in quality of engineering results and savings in time from design to production of dies are possible.

• Geomechanics and Engineering
• /
• 제10권6호
• /
• pp.709-726
• /
• 2016

Corrugated-core sandwich panels are prevalent for many applications in industries. The researches performed with the aim of optimization of such structures in the literature have considered a deterministic approach. However, it is believed that deterministic optimum points may lead to high-risk designs instead of optimum ones. In this paper, an effort has been made to provide a reliable and robust design of corrugated-core sandwich structures through stochastic and probabilistic multi-objective optimization approach. The optimization is performed using a coupling between genetic algorithm (GA), Monte Carlo simulation (MCS) and finite element method (FEM). To this aim, Prob. Design module in ANSYS is employed and using a coupling between optimization codes in MATLAB and ANSYS, a connection has been made between numerical results and optimization process. Results in both cases of deterministic and probabilistic multi-objective optimizations are illustrated and compared together to gain a better understanding of the best sandwich panel design by taking into account reliability and robustness. Comparison of results with a similar deterministic optimization study demonstrated better reliability and robustness of optimum point of this study.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.10-21
• /
• 1999

Recent progress in manufacture of hot and cold rolled steel strip products and their applications were reviewed. The main trend in the technological development has been to meet the customers' requests for quality improvement and cost reduction. The weight reduction to reduce the fuel consumption is the main issue in the automotive industry and, therefore, various steels have been developed to improve formability as well as strength. The steels include super-EDDQ steels, bainitic steels, TRIP steels, etc. In the oil industry, efforts have been focused to improve strength together with either low temperature toughness or HIC/SSCC resistance. The packaging industry is also a highly competitive market, and steel and canmaking companies have worked cooperatively to develop cost-effective canmaking processes as well as high performance steels. This type of cooperation has also been found important in other industries such as the appliance and electronic industries for the benefits of both steelmakers and customers.

• 드라이브 ㆍ 컨트롤
• /
• 제9권2호
• /
• pp.22-27
• /
• 2012

In order to improve the life and reliability of fluid components used in the Automotive, Hydraulics and Aerospace industries, the cleanliness of the system parts and components before their assembly into the system is being addressed. The measurement of components and parts cleanliness is related to contaminant collection, analysis and data reporting and ISO Standards are continually being developed to control procedures. This Paper explains the processes in these standards and explains how similar procedures have been adapted to suit the requirements of the above Industries. It also gives guidance and recommendations on the implementation of these standards, so that the best use can be made of them.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.894-896
• /
• 2003

This paper present the design algorithm using torque and rotor volume(TRV). And, this paper introduce that how to applying the 3-Dimensional Equivalent Magnetic Circuit Network(3D EMCN) and brushless motor circuit simulator. This algorithm is applied the design program, the design shape is compared with existed brushless motor.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.36-43
• /
• 1998

Surface roughness of cold rolled steel sheet as well as the coating technique itself is quite important in obtaining high image clarity of electronic products and car outer panels. Especially, surface characteristics of steel sheet have acquired increasing attention from the steel and automotive industries. While the influence of such characteristics on paintability formability and painted surface appearance is important in defining steel surface requirements for automotive industries. Therefore this paper is dedicated primarily to the issue of paint appearance and reviews for improvement of roughness and peak count about the surface of work roll for the actual temper mill. The conclusions were obtained as follows ; 1) Roughness and peak count about the surface of steel sheet is strongly affected by surface condition of work roll. 2) The electro-discharge textured roll has more uniform roughness distribution than shot blasted roll and it's painted appearance of steel sheet has more improvement than that of the shot blasted because it has more harmonic wave roughness, and the higher peak count of surface roughness.