• 센서학회지
• /
• 제32권2호
• /
• pp.124-130
• /
• 2023

Implementing flexible production systems in domestic and foreign automotive design parts assembly has increased demand for automation and power reduction. Consequently, transition to a hybrid production method is observed where multiple vehicles are assembled in a single assembly line. Multiple robots, 3D vision sensors, mounting positions, and correction software have complex configurations in the automotive glass mounting system. Hence, automation is required owing to significant difficulty in the assembly process of automobile parts. This study presents a primer lighting and inspection algorithm that is robust to the assembly environment of real automotive design parts using high power 'ㄷ'-shaped LED inclined lighting. Furthermore, a 2D camera was developed in the primer coating inspection system-the core technology of the glass mounting system. A primer application demo line applicable to the actual automobile production line was established using the proposed high power lighting and algorithm. Furthermore, application inspection performance was verified using this demo system. Experimental results verified that the performance of the proposed system exceeded the level required to satisfy the automobile requirements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.227-231
• /
• 1995

This paper describes a basic programming and interfacing modele which can link DataBase form experiments and dynamic analysis program of chock absorber within the limit of adequate reliability. The system developed can provid a user specific Database of shock absorber within the required damping performance and endurable tolerance, thus show a good application possibilities in commercial vehicle design.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1027-1029
• /
• 2002

In this paper, we present the circuit topology and control scheme of single-phase dc/ac inverter based on class E dc/dc converter for automotive application. The proposed inverter consists of class E series resonant inverter and class E low dv/dt PWM synchronous rectifier with bi-directional switch.

• 오토저널
• /
• 제14권4호
• /
• pp.68-78
• /
• 1992

Vibration and vibro-acoustic characteristics of body panels enclosing the vehicle interior cabin are tested and analyzed for effective application of sound proofing materials. A set of deadener and insulation packages are proposed based on the experimentally evaluated and categorized contributions of noise radiating panels. The suggested packages are applied to a prototype vehicle, and a refined acoustic quality is achieved. A systematic experimental procedure proposed in this study can be a good tool in tuning the acoustic quality of prototype vehicles within a limited development period.

• 세라미스트
• /
• 제9권6호
• /
• pp.7-11
• /
• 2006

The status of structural ceramics in Japan is presented. Use of ceramics for structural components had been limited due to their brittleness, and the successful application was wear resistant parts such as thread guides and ceramic cutting tools up to around 1980. Since then, considerable work has been done for applying ceramics to mechanical parts, and automotive components made of silicon nitride were developed and commercialized in 1980s. Unfortunately, the application of silicon nitride to automotive engines is not so popular in these days. Instead, a variety of structural ceramics such as alumina, silicon carbide and zirconia have recently extended the market, and the expanded application includes vacuum process parts for manufacturing semiconductor and liquid crystal devices, refractory tubes for casting aluminum alloy, and dies for optical lens forming. In addition, cordierite honeycombs and diesel particulate filters are widely used in automobiles. In the present review, the recent application of structural ceramics to automobiles and industries in Japan is summarized.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.25-30
• /
• 2010

The authors have studied on the corrosion resistance of the hot stamped steel sheets for the application to automotive parts. Recently automotive companies have focused on the hot stamped parts to meet the light weighting needs and the safe reason. Because of the cost reduction of the hot stamped parts, automotive companies increase the usage of the coated steel sheets, especially Al-Si coated steel sheets. The coated layer of Al-Si coated steel sheets contains up to 50% of Fe, which was diffused from the steel sheet, after hot stamping. The hot stamped steel sheet was not phosphated due to the oxidation layer of the coating, however, the result of the water resistance test is similar to that of the conventional GA steel sheets. The pitting depth and the weight reduction of the coated layer of hot stamped steel sheets are less than those of GA steel.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.27-32
• /
• 2007

Head-Up Display system makes it possible for the driver to be informed of important vehicle data such as vehicle speed, engine RPM or navigation data without taking the driver's eyes off the road. Long focal length optics, LCD with bright illumination, image generator and vehicle interface controllers are key parts of head-up display system. All these parts have been designed, developed and applied to the test vehicle. Virtual images are located about 2m ahead of the driver's eye by projecting it onto the windshield just below the driver's line of sight. Developed head-up display system shows satisfactory results for future commercialization.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.66-73
• /
• 2017

In this work, graphene platelets were introduced into wax in an automotive electronic controlled thermostat for the purpose of enhancing its thermal-conductive property and improving response performance. Graphene content ranging from 10 % to 20% was added into and mixed with the wax to investigate the effect of graphene amounts on the performance of an automotive electronic controlled thermostat in terms of response time, hysteresis and melting temperature. The experimental results revealed that graphene in wax contributed to a reduction in the response time and hysteresis of an automotive electronic controlled thermostat. As a consequence, important improvement in thermal sensitivity, full lift, melting temperature and hysteresis were obtained. The thermal response of wax with graphene content of 20 % was improved by 25 %, as compared to that of wax with Cu content of 20 %. Hysteresis of wax with graphene was reduced by $0.6^{\circ}C$ as compared to that of wax with Cu content. The melting temperature of wax is lowered and hysteresis is also improved with increased graphene content of wax in an electronic controlled thermostat. We hope that this study can help further the transition of nano-fluid technology from small-scale research laboratories to industrial application in the automotive sector.

• 에너지공학
• /
• 제25권4호
• /
• pp.133-140
• /
• 2016

제벡 및 펠티에 효과를 이용하는 열발전소자 또는 열전소자는 많은 산업 분야에서 활용되어지고 있다. 특히 군사용으로서 북극 및 남극에서 활동하는 잠수함에서부터 실생활에서 우리가 늘 접하는 냉온수기에 이르기까지 온도차를 이용하여 전력을 생산하거나 또는 전력을 투입하여 온도차를 발생시키는 장치의 효용성은 충분히 입증되었다고 할 수 있다. 자동차 분야에서 제벡효과를 이용한 열발전소자의 활용은 주로 고온의 배기가스를 이용하는데 집중되어 왔다. 본 연구에서는 자동차 내 엔진을 냉각 시킨 후 배출되는 고온의 냉각수를 활용하여 보조전력을 생산할 수 있는 가능성을 조사하였다. 그 결과 전력보조장치의 형태에 따라 전력생산량이 다르며 본 실험에서는 최대 약 1.5 V를 나타내었다.

• 실천공학교육논문지
• /
• 제8권2호
• /
• pp.91-94
• /
• 2016

요즈음 자동차 전기장치의 입출력 요소별 설계와 작동원리, 제어로직 등의 정성 및 정량적인 내용을 체계적으로 이해하면서 종합 진단기와 데이터 통신이 가능하고 동작 상태에서 시스템의 회로를 학습할 수 있는 시뮬레이터가 활발하게 연구되고 있다. 이에 본 연구의 목적은 회로수리 능력을 정의하고, 회로수리 준비 능력, 탈부착 능력, 회로분석능력, 점검 및 측정능력, 수리(문제해결)능력, 정리능력의 함양을 통해 전기장치 정비에 대한 이해를 높이고 회로수리능력의 향상을 검증하는 데 있다. 본 논문에서는 자동차 등화장치 시뮬레이터 장치를 연구 개발하여 자동차 전기장치의 점검과 자동차 회로의 수리 및 점검, 전기계측 내용의 이해에 도움을 주고자 했다. 자동차 전기 장치는 눈에 보이지 않는 부분에 대한 이해가 필요하고, 기본점검 및 측정, 수리를 위해서 다양한 기호와 복잡한 회로에 대한 이해가 필수적으로 요구된다. 이러한 필수적인 부분에 대해 어려움을 느끼는 학생들에게 전기장치에 대한 흥미를 높이고, 자동차 전기실습에 필요한 기본적인 지식의 함양과 다양한 전기장치 고장진단에 필요한 기초능력을 습득할 수 있도록 하였다.