• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.49-55
• /
• 2023

In this study, it was analyzed that it is necessary to clarify the quality certification parts system, to make certification codes mandatory for self-certification products that are normally distributed, and to conduct follow-up management so that prompt action and thorough management of test reports are necessary in case of defects. Big data-based data, the detailed number of parts replacement cases, parts cost by part group, share, average labor cost, calculated to analyze the detailed automobile parts industry, and automobile parts certification system and automobile parts market in major countries including Korea and Through the distribution structure analysis, improvement plans for the automobile quality certification parts system were derived.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.561-566
• /
• 2000

Recently, the hydroforming technology has been recognized as a general technique in manufacturing industry, especially in automotive industry. Hydroforming is applied to increase strength, and to decrease weight, cost and parts. Hydroforming is based on the inflation of, for Instance, a tube, coupled with axial or radial compression and by subsequent expansion and sizing against the die wall. Expansion, axial feeding, calibration are important parameters in this process. In this paper, the effects of various parameters such as internal pressure, axial feeding and friction on hydroforming of automotive bumper rail have been considered.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.189-198
• /
• 2018

Automotive parts distribution industry focused on increasing sales by product quality until early 2010, but as competition has recently intensified, each company has become interested in core values such as customer satisfaction, trust and loyalty. Therefore, effect of customer-oriented service mindset should be analyzed for the relationship between service quality and customer satisfaction, trust, and loyalty in this industry. For this, a questionnaire survey was conducted for 342 distributors. Structural equation models were analyzed using AMOS 23.0. Empirical results show service quality has positive effects on customer loyalty, and customer satisfaction and trust mediate between service quality and customer loyalty. The service quality became a key factor to elicit customer satisfaction, trust and loyalty. Following studies, it is expected to enhance service quality focusing on extending region coverages.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.399-409
• /
• 2016

Recent automotive market is changing rapidly with eco-friendly, fuel-efficient, unmanned autonomous. In order to grow domestic automotive industry, various companies such as IT, marketing, advertising/PR, production/manufacturing, distribution have to need the fused global value chain(GVC) production system. The purpose of this study is that Small parts makers will look for support measures to enter the GVC of global automakers. To this end, to examine the status and cooperation between vehicle manufacturers and component suppliers in GVC. Part SMEs will look for Realistic and possible support policy direction needed to enter the carmakers GVC. In order that the small parts company have to enter the GVC of the car manufacturers in the automotive industry, the small parts company should understand the nature and governance of large corporations that operate the GVC, and develop a tailored strategy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1376-1380
• /
• 2005

In recent automotive industry, vehicle weight can be reduced by one-step forming of tailored blanks welded with two or more sheets of metal blanks. Tailored blank(TB) welding is a production method for blanks involving welding together materials of different quality, thickness, and coating, and has proved popular in fabrication automotive parts. This paper deals with the forming characteristics of mash seam welded tailored blanks. Using these forming characteristics, the bumper beam was developed using the mash seam welded tailored blank with the different thickness. We performed the forming simulation with respect to strain distribution on blank during the stamping of the bumper rail part. Based on these results, we made some stamping tryouts with selected types of blank designs to investigate the formability of tailored blank with different thickness. During the tryouts, we knew that it was important the BHF(Blank Holding Force). We obtained to reducing 10.5% weight and cost with adapting the bumper beam of automotive component using the tailored blank of mash seam welding.

• Transactions of Materials Processing
• /
• v.12 no.8
• /
• pp.702-709
• /
• 2003

In the automotive industry hydroforming of sheet metal pairs have received special attention because materials for various sheet metal components of vehicles have changed into the high strength steel, aluminum, and titanium blank having low formability. Uniform deformation over the whole region is a main advantage in the sheet hydroforming process. Because upper and lower parts could be produced simultaneously with one tool, hydroforming of sheet metal pairs is competitive in reducing the lead-time and development cost. In this paper, the multi-stage hydroforming process of sheet pair is proposed in order to increase the formability of a structural part like the oil pan shape. The upper die for forming oil pan shape is divided into two parts which can move separately. By the finite element simulation, the design parameters such as geometry of the tool and detailed specification of hydraulic pump were calculated and verified. For the strict comparison of the proposed process, the blank holding force is kept to a constant value during deformation by hydraulic valve. The deformed shape and strain distribution of the manufactured parts with the proposed process are compared with the results of simulation. In the multi-stage hydroforming process, maximum thickness strain was improved by more than 30 percent.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.313-318
• /
• 2001

Compression molding is widely used process for the industrial forming of fiber reinforced plastic articles. Its applications are of an extreme variety and the products range from large parts, such as used in the automotive industry to much smaller objects. In this paper, distribution of fiber orientation by the image processing method for rib type compression molded products of each fiber content is measured. And the effects of fiber content, product size on the orientation state are discussed.

• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.144-149
• /
• 2007

The superplastic forming/diffusion bonding(SPF/DB) is widely used in the automotive and aerospace industry because it has great advantage to produce complex, light and strong parts. But the superplastic forming process requires much forming time and generates excessive thinning in the thickness distribution of formed part. It is necessary to minimize trial and error for SPF/DB Process. Finite element analysis using $L_{18}$ orthogonal may table of Taguchi method for 3-Sheet D/B process is carried out. Through the study, effect of process parameters, such as DH region size, thickness and friction coefficient, is evaluated and the optimum condition is derived.