• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.624-630
• /
• 2013

In this study, a parametric study is performed to investigate the squeal noise of an automobile water pump. The squeal noise studied in this paper is generated by the self-excited torsional resonance of the rotating shaft, and this noise is related to the stick-slip phenomenon of the mechanical seal in the water pump. The mechanical seal friction has the characteristics of the negative velocity-gradient. The equations of motion of multiple-degree-of-freedom torsional vibration model is constructed by the Holzer's method and then the equation is transformed to an equivalent single-degree-of-freedom torsional resonance simulation model. A squeal noise criteria is determined by the simulation model to perform the parametric study. The design parameters(the mass moment of inertia of the pulley, the mass moment of inertia of the impeller, the length of the shafts, the radius of the shafts, spinning speed of the shafts, the position of the mechanical seal, radius of the mechanical seal, and normal load of the mechanical seal) are investigated to confirm the stability for the squeal noise.

• Korean Journal of Artificial Intelligence
• /
• v.9 no.1
• /
• pp.9-14
• /
• 2021

This paper predicted a model that indicates whether to buy a car based on primary health insurance customer data. Currently, automobiles are being used to land transportation and living, and the scope of use and equipment is expanding. This rapid increase in automobiles has caused automobile insurance to emerge as an essential business target for insurance companies. Therefore, if the car insurance sales are predicted and sold using the information of existing health insurance customers, it can generate continuous profits in the insurance company's operating performance. Therefore, this paper aims to analyze existing customer characteristics and implement a predictive model to activate advertisements for customers interested in such auto insurance. The goal of this study is to maximize the profits of insurance companies by devising communication strategies that can optimize business models and profits for customers. This study was conducted through the Microsoft Azure program, and an automobile insurance purchase prediction model was implemented using Health Insurance Cross-sell Prediction data. The program algorithm uses Two-Class Logistic Regression and Two-Class Boosted Decision Tree at the same time to compare two models and predict and compare the results. According to the results of this study, when the Threshold is 0.3, the AUC is 0.837, and the accuracy is 0.833, which has high accuracy. Therefore, the result was that customers with health insurance could induce a positive reaction to auto insurance purchases.

• International Journal of Automotive Technology
• /
• v.7 no.4
• /
• pp.449-457
• /
• 2006

The driver model during drift cornering was examined, and a technique to improve vehicle movement performance during drift cornering was investigated. Based on the results obtained, the driver was found to steer using feedback of the body slip angle and the body slip angle velocity during drift cornering. Moreover, improvement of the cornering force characteristic, at which exceeded the maximum cornering force calm as much as possible is important.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.6
• /
• pp.29-37
• /
• 2019

Purpose - This study intends to analyze Chinese consumers' purchase intention of Korean automobile. The aims of this study investigated to find out how product attributes and brand image affect the consumer's purchase intention of Korean automobiles in China. We consider the product attributes, brand image as evaluation criteria, also recognized as objectives for purchase intention. This study aims to analyze the positive effects on Chinese consumers' purchase intention with the variables by using the research model. Research design, data, and methodology - Based on theory of Purchase Intention, the concept of purchase intention was assessed by two factors: a) product attributes, and b) brand image to test the proposed hypotheses. The survey was conducted for 30 days, from October 17 to November 16 in 2018. With IBM SPSS Statistics 23.0 and IBM SPSS AMOS 23.0, factor analysis and regression, Cronbach's alpha and correlation were tested. 300 samples were used for this analysis. Results - As a main result, product attributes and brand image exerted significant effects on consumer's purchase intention. Thus,

and

were supported. The results showed that the product attributes, brand image had positive effects on purchase intention. The findings of this thesis are as follows: Firstly, automobiles' quality factors were divided into two categories like product properties (price, performance, design, economy, and safety), and brand image (awareness, favorability, reliability, and familiarity). Second, it showed that product properties and brand image had positive impacts on purchase intention of consumer. Conclusions - The impact of product attributes and brand image on consumer perceived value of Korean automobiles in China can be seen as a universal psychology of consumers who trust automobile products such as high quality, technology, ets. The results offer some insights into the extended model and have important managerial implications for Korean automobile enterprise. As the findings of this thesis show, all strategic orientations have significant and positive effects on the ability of innovation. At the same time, automobile company must pay attention to quality. As the relationship between the automobiles' performance and brand image were positive and significant, automobile companies should have comprehensive strategic orientations focused on strengthening these factors.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.520-526
• /
• 2013

This article presents the reduction of vibration generated by an automobile fuel pump. In order to analyze the vibration of the fuel pump, a simplified dynamic model is established, which is composed of a rigid rotor and a equivalent springs. The equivalent stiffnesses of the upper and lower assemblies are evaluated by the comparison of modal testing results and the finite element analysis. The stiffness for the oil film of the journal bearing is extracted by using Reynold's equation. In addition, the time responses for the vibration of the fuel pump are computed by using a commercial multi-body dynamics software, RecurDyn. Based on these results, some design suggestions are proposed to reduce the vibration of an automobile fuel pump.

• Journal of Information Technology Applications and Management
• /
• v.10 no.3
• /
• pp.121-142
• /
• 2003

Most of companies related to the area of B2B electronic commerce are making their efforts to innovate their existing business process into new designed process based on the concept of virtual enterprise. Virtual enterprise can take on many forms and definitions. Nevertheless, the rationale for this business model is clear cooperate to compete, the virtual organization advocates collaboration, partnerships, alliance and similar ideas. This studyintends to suggest an empirical clue to test several hypotheses related to the influence of environmental. organizational, and technological factor to the successful implementation of virtual enterprise in automobile industry. This research surveyed 91 corporations in Korean automobile part industry. Among those samples 86 data of corporate general managers turned out to be statistically valid. This study performed the factor analysis, Cronbach-alpha test. Pearson correlation analysis for testing the validity and the reliability of this research. The results of factor analysis and reliability test indicate that thirty issues to be surveyed are to be grouped into nine factors. The result of multiple regression shows that the influencing factors of eight independent variables on a dependent variable are cooperation between partners, information intensity, IT compatibility, IS maturity. The partners in the strategic alliance will have to trust each other in carrying out their designated roles and responsibilities. and supplying the correct information critical for creating value in virtual business environment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.50-57
• /
• 2013

The high temperature thermal attacks in welding can affect the residual stress of a frame for automotive assembly accompanying frame deformation. Also the residual stress can induce the negative effect on durability performance of the automobile. In order to analyze the frame deformation, the simplified test frame which had the similar shape (form) of the real automotive frame was fabricated. The contactless optical 3D scanner was used for the shape difference measurement of the frame between before and after the welding. The FE-model of the test frame was composed and the deformation and residual stress simulation were performed. The simulated results were compared with the measured results for the reference of the frame design following as the variation of welding sequency. The deformation shape of the frame by simulation was in good agreement with that by the experimental measurement. In addition, the optimized welding sequency with reduced deformation after welding could be achieved through these analyses.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.15-23
• /
• 2013

Weight reduction of a automobile has been steadily tried in automotive industry to improve fuel efficiency, driving performance and the production profits. Since the weight of BIW takes up a large portion of the total weight of the automobile, reducing the weight of BIW greatly contributes to reducing the total weight of the vehicle. To reduce weight, vehicle manufacturers have tried to apply lightweight materials, such as aluminum and high-strength steel, to the components of BIW instead of conventional steel. In this research, material arrangement of an automotive BIW was optimized by formulating a design problem to minimize weight of the BIW while satisfying design requirements about bending and torsional stiffness and perform a metamodel-based design optimization strategy. As a result of the design optimization, weight of the BIW is reduced by 45.7% while satisfying all design requirements.

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.198-206
• /
• 2005

The single sourcing policy, in which an automobile manufacturer purchases identical or similar parts from one supplier, has an advantage of scale economy. Meanwhile, multiple sourcing policy, which allows procuring similar parts from multiple suppliers, has benefits of dispersing risks and promoting competition among suppliers. This paper analyzes the procurement policies by presenting a model of the Japanese automobile parts trade. It concludes that maturity of technology involved should be taken into account besides above-mentioned factors which have traditionally been recognized. For parts produced using evolving technologies, the single sourcing enhances purchaser’s benefits because of the scale economy in learning process. In the meantime, multiple sourcing is more beneficial to the purchaser if the parts are based on mature technologies. In either policy, if the technology involved is evolving, motivating suppliers by returning a great part of cost reduction as a reward to them may eventually increase profit for the purchaser. The conclusion supports the situation where the number of suppliers is being cut down as the trend of modularization and system deliveries of parts progresses in the auto parts industry, and suggests that returning part of benefits to parts suppliers may be encouraged from the viewpoint of auto manufacturers’ own interest.

• Journal of computational fluids engineering
• /
• v.3 no.2
• /
• pp.39-51
• /
• 1998

This paper describes the analysis of flow field around an automobile. The governing equations of the 3-D unsteady incompressible Navier-Stokes equations are solved by the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror. To validate the capability of simulating the flow around a ground vehicle, the flows around the Ahmed body with 12.5$^{\circ}$ and 30$^{\circ}$ of slant angles are simulated and good agreements with experiment and other numerical results are achieved. To validate Chimera grid technique, the flow field around a cylinder was also calculated. The computed results are also well agreed with other numerical results and experiment. After code validations, the flow phenomena around the ground vehicle are evidently shown. The flow around the side-view mirror is also well simulated using the Chimera grid technique.