• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.192-198
• /
• 2005

Recently, Automobile manufacturers regarding stability, economic environmental-friendly problems by the development of automobile. This reason is increasingly strict environmental regulations to lower fuel consumption and reduce emission. Designing more efficient and low emission control exhaust system results in more efficient Performance, reduced back Pressure and higher convert efficiency. Also to reduce the noise and the vibration of the automobile. According to develop variable type muffler, dual muffler and active intelligence exhaust system unit. Improvement in engine performance and fuel consumption rate, higher conversion efficiency demand information of pressure fraction and heat characteristics. To be able to determine these factor fur we experiment on each case of exhaust system unit. In this study, how back pressure is distributed in flow-through in exhaust system and how to design exhaust system flexibleness, efficiency, lower back pressure and optimal performance. This study furnish basic data for engineers, technicians.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.206-212
• /
• 2004

It is necessary to consider the stability, economic environmental-friendly problems by the development of the road, supply of the automobile, environmental problem as designing the exhaust system. To reduce the noise and the vibration of the automobile, it is needed to consider the pulsation noise, air current noise, vibration of air pipe which generate the intake and exhaust noise of the automobile. Moreover, the discharge sounds, intake sound, radiation sound, transmitted sound are occurred. To reduce this influence, the variable valve is needed and to control these factors, path transformation muffler and active type muffler are needed. While engine efficiency could be reduced with this transformationand resistance by the pressure, thermal property. In this study, how to design exhaust systems yielding higher condversion efficiency, lower backpressure and optimize the performance. this study is recommended for exhaust system and designers and engineers involved in SI engine exhaust system and it will furnish information for you to design more efficient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1091-1096
• /
• 2004

It is necessary to consider the stability, economic environmental-friendly problems by the development of the road, supply of the automobile, environmental problem as designing the exhaust system. To reduce the noise and the vibration of the automobile. The need for stricter regulation limits emission and demand for lower fuel comsumption. According to motor vehicle company develop variable type muffler, dual muffler and active intelligence exhaust system unit. Improvement in engine performance and fuel consumption for demand information of pressure fraction and heat characteristics. To be able to determine these factor for we experiment on each case of exhaust system unit. In this study, in order to establish the optimized conditions design factors which are taking many performance as the variable valve, it shows how the standard performance and the additional element of the exhaust system effects on the engine performance.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.120-130
• /
• 1993

In the analysis of automobile exhaust system, the exciting forces from the engine determine the dynamic behavior of the system and the dynamic characteristics influence the riding quality. Therefore, the identification of the force in numeric value is quite important for the vibrational reduction. However, the value is difficult to obtain by experiments due to harsh conditions around the engine. In this research, an optimization technology is adopted to evaluate the exciting forces. An experimental method is conducted for the verification of the finite element modeling. Displacements on the end of the exhaust system are measured under the idling environment. cost function is set up to minimize the differences between the displacements of the numerical simulation and the experiment. Design variables are the components of the exciting forces. That is, optimization is utilized to estimate the forces with existing data. Excellent estimations have been calculated efficiently and the information is used again for the forced vibration of the exhaust system.

• 한국산업정보학회논문지
• /
• 제28권1호
• /
• pp.35-48
• /
• 2023

본 연구에서는 급변하고 있는 세계 경제 환경 하에서 중국 자동차 산업의 발전 현황과 자동차 산업과 관련한 중국 정부의 정책을 살펴보고, 중국 내 소비자들의 자동차 구입에 대해 소비자 동향 조사를 실시하였다. 중국 정부의 강력한 국가 배출가스 규제정책과 내연기관 자동차 제조·판매 기준의 강화에도 불구하고 소비자들은 다양한 이유로 앞으로 자동차를 구매 시 내연기관차를 선택하겠다는 응답비율이 59.6%에 달하는 등 정부 정책과 소비자 인식 사이에는 적지 않은 차이가 존재하고 있음을 확인하였다. 또한, 최근의 중국 내 자동차 판매량의 감소 추세를 발견하여 2010년 1월부터 2020년 12월까지 월별 판매량을 학습용 데이터로, 2021년 1월부터 2022년 11월 동안의 판매량을 평가용으로 구분하여 향후 중국의 자동차 수요를 예측하는 시계열 모형들을 제안, 평가하였다. 그리고 각 시계열모형을 적용하였을 때의 2023년도의 월별 예측 판매량을 보였다.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1630-1636
• /
• 2003

Automobile companies and research institutions in leading automobile-manufacturing nations have recently been very active with research regarding the HCCI engine for use in future vehicles. Because HCCI engines take advantage of high compression ratio and heat release rate, they exhibit high efficiency found in compression ignition engines. HCCI engines also utilize a lean air/fuel ratio resulting in low emissions of NO$_{x}$ and PM (particulate matter). The objective of this research is to determine the effects of EGR rate on the combustion processes of HCCI. for this purpose, a 4-cylinder, compression ignition engine was converted into a HCCI engine, and a heating device was installed to raise the temperature of the intake air and also to make it more consistent. In addition, a pressure sensor was inserted into each of the cylinders to investigate the differences in characteristics among the cylinders. The experimental study of the effects of EGR rate on various gas emissions, engine performance, etc. should prove to be a valuable source of information for the development of the HCCI engine.e.

• 디지털융복합연구
• /
• 제17권12호
• /
• pp.203-210
• /
• 2019

오늘날 대부분의 자동차는 전자제어를 통하여 엔진의 상태를 제어하여 최적의 성능을 얻을 수 있도록 하고 있다. 본 연구는 캔통신을 이용하여 자동차의 엔진의 정보를 운전자에게 실시간으로 화면에 표시하여 고장진단과 최적의 자동차 상태를 유지하는 장치를 개발하였다. 이 시스템은 엔진에서 발생되는 정보를 OBD2 소켓을 통하여 엔진의 흡배기온도, 현재 배터리 전압, 타이어 공기압, RPM, DPF 포집량, 토크, 마력 등의 정보를 실시간으로 운전자에게 표시하여 운전자가 차량의 상태를 즉시 확인이 가능하다. 타이어의 공기압을 측정하여 화면에 표시하여 안전운행에 도움을 줄 수 있으며, 자신의 취향에 맞도록 변속타이밍을 설정할 수 있는 모드를 제공한다. 특히 디젤엔진 자동차의 경우 매연으로 인한 문제는 자동차 성능과 환경오염에 악영향을 미칠 수 있으므로 시스템 화면에 DPF 포집량을 표시하여 환경오염 방지와 효율적인 자동차 관리를 할 수 있도록 시스템을 개발하였다.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.138-143
• /
• 2005

Recently, automobile manufacturers regarding stability, economic environmental-friendly problems by the development of automobile, environmental problem as designing the exhaust system. Increasingly strict environmental regulations to lower fuel consumption and reduce emission. Also to reduce the noise and the vibration of the automobile. According to develop variable type muffler, dual muffler and active intelligence exhaust system unit. Improvement in engine performance and fuel consumption rate demand information of pressure fraction and heat characteristics. To be able to determine these factor for we experiment on each case of exhaust system unit. In this study, how back pressure is distributed in flow-through in exhaust system and how to design exhaust system flexibleness, efficiency and combustion charateristics influenced by back pressure. This study furnish basic data for engineers, technicians.

• 디지털융복합연구
• /
• 제11권7호
• /
• pp.185-192
• /
• 2013

본 연구는 산업현장에서 작업자의 숙련도에 맞추어 학습이 가능한 3D 가시화기술과 이를 바탕으로 하여 자동차 엔진을 구성하고 있는 각각의 부품들 사이의 관계를 설정하고 태스크 온톨로지를 이용하여 자동차 부품을 추천하는 방법을 제안한다. 복합지식을 네트워크 형태의 의미화된 링크와 노드로 구조화하고 3차원 형태로 보여줄 수 있도록 SOM을 이용한 가시화방법을 제안하였다. 또한, is-a Relationship 기반 hierarchical Taxonomy를 이용하여 자동차 엔진을 구성하고 있는 각각의 부품들 사이의 관계를 설정하고, 가중치를 이용한 추천이 이루어 질 수 있도록 하였다. 3D 공간상에 복합지식을 배치하고 사용자에게 제공함으로써 보다 실감적이고 직관적인 네비게이션의 기회를 제공하고, 임의의 자동차 부품을 선택했을 때 해당 부품과 밀접한 관계를 가진 부품을 추천하여 특별한 전문 지식 없이도 손쉽게 자동차 부품의 조립 및 쓰임새와 중요성을 알 수 있게 해준다.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.207-213
• /
• 2010

Fuel consumption measurement of hydrogen fuel cell vehicle is considerably different from internal combustion engine vehicle such as carbon balance method. A practical method of fuel consumption measurement has been developed for hydrogen fuel cell vehicles. There are three method of hydrogen fuel consumption testing, gravimetric, PVT (pressure, volume and temperature), and mass flow, all of which necessitate physical measurements of the fuel supply. The purpose of this research is to measure the fuel consumption of hydrogen fuel cell vehicles on chassis-dynamometer and to give information when the research is intended to develop test method to measure hydrogen fuel economy.