• 한국측량학회지
• /
• 제31권4호
• /
• pp.331-339
• /
• 2013

LiDAR 측량은 고밀도로 정확하게 거리를 측정하는 장점 때문에 지표면과 지표면 위의 객체를 3D 모델링하는데 사용되는 주요기술 중의 하나이다. 본 연구의 목적은 고밀도 LiDAR 데이터와 RANSAC 알고리즘을 이용하여 자동으로 철도전력선을 탐지하고 모델링하는 방법을 개발하는데 있다. 철도전력선을 탐지하기 위하여 레이저 데이터의 다중반사 특성과 철도전력선에 대한 형상정보를 이용한다. 이를 위한 프로세스는 최초 단위라인을 찾기 위한 직육면체 분석과 라인 추적, 연결 그리고 색인 작업으로 구성되며, 반복 RANSAC과 라인 파라미터를 구하기 위한 최소제곱법이 모델링을 위하여 사용된다. 철도전력선의 경우에는 정확도 확인을 위한 실측자료를 구하는 것이 매우 힘들어서 정량적인 정확도 평가가 어려우나 모델에 대한 레이저점군의 표준편차는 x-y 및 z 좌표 각각 8cm와 5cm로 양호하였고, 육안 검사에 의한 완성도면에서도 원 데이터와 비교할 때 모든 철도전력선 라인이 탐지 및 모델링된 것을 알 수 있었다. 본 연구에서 제시하는 방법의 모든 과정은 완전히 자동화하였으며, 특히 다수의 전력선이 복잡하게 설치된 지역에서도 적용될 수 있도록 개발하였다.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.803-808
• /
• 2018

Combining digital automation solutions throughout recent manufacturing process is essential. Advanced robot and mechanical techniques are required for design, manufacture, and distribution process. Manual design of repetitive similar mechanical components during the development phase of these advanced machines and robots can occur wasting time and money. Developed gear design module, which is the power transfer system mechanical component, was programmed in the Visual Basic language in CATIA V5 environment. Automation Process is Based on Parametric Modeling Method. and it was found to be effective in reducing design time compared to designers manual modeling.

• 한국측량학회지
• /
• 제35권5호
• /
• pp.431-438
• /
• 2017

The information management system for urban planning, urban management and related decision making is increasing an importance in recent years. Especially, the information about 3D buildings in urban area is necessary for urban management related precise location based service. However, it takes a lot of time, effort, and costs to produce 3D modeling data of buildings. These problems have been found in many studies, but the research to solve these problems is still necessary. In this study, we have tested an efficient 3D modeling method of building to solve these problems. SketchUp was used to test 3D modeling methods with OSM(OpenStreetMap) data. The other 3D modeling method using a digital map was tested. The 3D modeling of building data was efficient using PlaceMaker, which can use OSM data. In addition, modeling was possible through simple editing of the digital map and automatic building generation. The efficiency of the research results is presented by comparing with the traditional method based on the regulation and the stadard man power issued by Korean government. These two 3D modeling methods of building tested through the study can be used as basic data for related research and work. Additional studies should be conducted to improve the accuracy of the building model and determine how to obtain height data efficiently.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1544-1553
• /
• 2019

The efficiency of photovoltaic generation systems depends on the maximum power point tracking (MPPT) technique. Among the various schemes presented in the literature, the incremental conductance (INC) method is one of the most frequently used due to its superb tracking ability under changes in insolation and temperature. Generally, conventional INC algorithms implement a simple duty-cycle updating rule that is mainly found on the polarity of the peak-power evaluation function. However, this fails to maximize the performance in both steady-state and transient conditions. In order to overcome this limitation, a novel regulated INC (r-INC) method is proposed in this paper. Like the compensators in automatic control systems, this method applies a digital compensator to evaluate the INC function and improve the capability of power tracking. Precise modeling of a new MPPT system is also presented in the optimized design process. A 120W boost peak power tracker is utilized to obtain comparative test results and to confirm the superiority of the proposed method over existing techniques.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.154-162
• /
• 2004

In this study, a mathematical model for analyzing the shifting transients of the passenger car with an automatic transmission is proposed. The proposed model comprises a power transmission system and a vehicle system, which are coupled. In order to extract the modeling parameters, on-road car test is carried out. The model is composed of a detailed powertrain, an engine/AT housing, a simplified suspension system, tires and a vehicle body model. On the test, the vehicle accelerations and pitch ratio are measured by using accelerometers and a gyro sensor. The speeds, the brake signal, and the throttle position are taken from sensors which already exist in the vehicle. Considering natural ftequencies, which is calculated from the measured accelerations, and the characteristic equation, vehicle model parameters are identified. Dynamic behaviors during upshift or downshift are simulated using the proposed vehicle model. By comparing and analyzing the simulation result and on-road car test data, the vibration of the Engine/AT housing influences the shifting transients. The effect of model parameters are also studied. Among model parameters, the location of engine mountings influences the vibration of the vehicle body.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1008-1012
• /
• 1997

This study is on a mathematical model of profile shifted involute gear, and this model is based on Camus's theory. Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers bit power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shape curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, It is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. So we draw three dimensions gear have accurate mathematical function using ADS(Automatic Drawing system), VisualLISP. To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.315-320
• /
• 1998

In this work, an automatic software verification method for Nuclear Power Plant (NPP) protection system is developed. This method utilizes Colored Petri net (CPN) for modeling and Prototype Verification system (PVS) for mathematical verification. In order to help flow-through from modeling by CPN to mathematical proof by PVS, a translator has been developed in this work. The combined method has been applied to a protection system function of Wolsong NPP SDS2(Steam Generator Low Level Trip)and found to be promising for further research and applications.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.112-119
• /
• 2009

An automatic transmission of construction equipment is controlled by hydraulic and electronic system for doing in various functions like as shifting and operation. The shifting is operated by the engaged and disengaged clutch motion from hydraulic power. On the shifting process, suitable pressure control to the clutch is required for smooth shifting. Hydraulic control system in the automatic transmission is divided by the pilot control type and the direct control type greatly. The direct control type has an advantage than the pilot control type. Because the structure is simple, the design and the manufacture are having less troubles and the system can be maximized precision pressure control. However, the excellent performance proportional control valve should be used to achieve proper control-ability. In this study, the dynamic analysis model composing the automatic transmission and hydraulic system for forklift truck is presented to simulate the characteristics of hydraulic system about the direct control type. That model is verified the validity compared the results of the testing examination. Parameters of input signal are analyzed to reduce the output torque according to input control signal is affected in shifting characteristic.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.257-266
• /
• 2003

3D Modeling Solution can reduce projecting error and also make possible to design visually, so that it can minimize human resources. On the other hand, it has defects of operating difficulties caused by too much complex function, thus it consequently prevent user from prompt handling. According to this paper, the developed party S/W will help that user can construct the parts easily, can let everybody use 3D modeling solution readily, and make fast development of new product. This software will carry out prompt development of new product and derive satisfaction of customers from high quality. Also, saving time and expense naturally raise competitive power in consequence.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.160-163
• /
• 1993

In this paper, design of an automatic grinding robot system for car brazing bead is introduced. Car roof and side panels are joined using brazing, and then the brazing bead is processed so that the bead is invisible after painting. Up to now the grinding process is accomplished manually. The difficulties in automation of the grinding process are induced by variation of position and shape of the bead and non-uniformity of the grinding area due to surface deformation. For each car, the grinding area including the brazing bead is sensed and then modeled using a 2-D optical sensor system. Using these model data, the position and the direction of discrete points on the car, body surface are obtained to produce grinding path for a 6 degrees of freedom grinding robot. During the process, it is necessary to sense the reaction forces continuously to prepare for the unexpected circumstances. In addition, to meet the line cycle time it is necessary to reduce the required time in sensing, signal processing, modeling, path planning and data transfer by utilizing real-time communication of the information. The key technique in the communication and integration of the complex information is obtaining in-field reliability. This automatic grinding robot system may be regarded as a jump in the intelligent robot processing technique.