• 제어로봇시스템학회논문지
• /
• 제7권1호
• /
• pp.1187-1195
• /
• 2001

This paper presents a sweeping path planning algorithm for an autonomous smearing robot. An automatic planner generates a sweeping path pattern by proposed five basic procedures. This algorithm rocog-nizes obstacle on the architectural CAD draft and generates subgoals as tracking points which executes the area filling task based on heuristic approach. A sweeping path is planned by sequentially connecting the track-ing points in such a way that(1) the connected line segments should not be crossed, (2) the total tracking points should be as short as possible, and (3) the tracking line should not pass through the obstacle, Feasibility of the developed techniques has been demonstrated on a real architectural CAD draft.

• 한국지능시스템학회논문지
• /
• 제13권4호
• /
• pp.480-485
• /
• 2003

인쇄회로기판을 조립하는 SMT (surface mount technology) 라인의 AOI (automatic optical inspection) 형 검사기를 대상으로, 검사시간 단축을 위한 경로계획 방법을 제안한다. 기판에 존재하는 검사 윈도우들은 카메라의 FOV (field-of-view) 크기를 고려하여 클러스터링 되어야 하며, 전체 검사시간의 단축을 위하여 클러스터의 수를 최소화하는 것이 바람직하다. 주어진 기판에 대한 클러스터의 수를 최소화하기 위한 유전자 알고리즘을 새로이 제안하며, 이를 사용한 효과적 경로계획 방법을 제시한다. 상용 검사기를 대강으로 시뮬레이션을 수행하며, 비교 평가를 통하여 제안된 방법의 유용성을 검증한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.200-205
• /
• 1993

The automatic forming sequence design system can determine desirable operation sequences even if they have little experience in the design of cold forging process. This system is proposed,which generates forming sequence plans for the multistage cold forging of zxisymmetrical solid products. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the product is a key in planning processes. Forming sequence for the part can be determined by means of primitive geometries such as cylinder,cone, convex, and concave. By utilizing this geometrical characteristics(diameter,height, and radius),the product geometry is expressed by a list of the pnmitive geometries. Accordingly, the forming sequence design is formulated as the search problem which starts with a billet geometry and finishes with a given product one. Using the developed system, the sequence drawing with all dimensions, which includes the proper sequence of operations for the part, is generated under the environment of AutoCAD. The preliminary choice of some feasible forming sequences can verify by using the finite element simulation.

• 대한산업공학회지
• /
• 제33권3호
• /
• pp.355-363
• /
• 2007

This paper presents a method of an automatic work time evaluation based on the verification of a disassemblability and assembly configuration. Even though a work time evaluation is an important field of concern for planning assembly lay-out, there are some limitations using cumbersome user query or approximated work time data without considering assembly condition. To overcome such restriction, this paper presents a method to mathematically verify assembly conditions based on the disassemblability, which is defined by the separability and stability cost. The separability cost represents a facility of the part disassembly operation, and the stability cost which represents a degree of the stability for the base assembly motion. Based upon the results, we propose a new approach of evaluating work time using neural networks. The proposed method provides an effective means of solving the work time evaluation problem and gives a design guidance of planning assembly lay-out in flexible manufacturing application. Example study is given to illustrate the concepts and procedure of the proposed schemes.

• Advances in aircraft and spacecraft science
• /
• 제7권1호
• /
• pp.53-78
• /
• 2020

Automatic trajectory planning is an important task that will have to be performed by truly autonomous vehicles. The main method proposed, for unmanned airplanes to do this, consists in concatenating elementary segments of trajectories such as rectilinear, circular and helical segments. It is argued here that because these cannot be expected to all be flyable at a same constant speed, it is necessary to consider segments on which the airplane accelerates or decelerates. In order to preserve the planning advantages that result from having the speed constant, it is proposed to do all speed changes at maximum deceleration or acceleration, so that they are as brief as possible. The constraints on the load factor, the lift and the power required for the motion are derived. The equation of motion for such accelerated motions is solved numerically. New results are obtained concerning the value of the angle and the speed for which the longest distance and the longest duration glides happen, and then for which the steepest, the fastest and the most fuel economical climbs happen. The values obtained differ from those found in most airplane dynamics textbooks. Example of tables are produced that show how general speed changes can be effected efficiently; showing the time required for the changes, the horizontal distance traveled and the amount of fuel required. The results obtained apply to all internal combustion engine-propeller driven airplanes.

• Advances in aircraft and spacecraft science
• /
• 제4권3호
• /
• pp.237-267
• /
• 2017

Automatic trajectory re-planning is an integral part of unmanned aerial vehicle mission planning. In order to be able to perform this task, it is necessary to dispose of formulas or tables to assess the flyability of various typical flight segments. Notwithstanding their importance, there exist such data only for some particularly simple segments such as rectilinear and circular sub-trajectories. This article presents an analysis of a new, very efficient, way for an airplane to fly on an inclined circular trajectory. When it flies this way, the only thrust required is that which cancels the drag. It is shown that, then, much more inclined trajectories are possible than when they fly at constant speed. The corresponding equations of motion are solved exactly for the position, the speed, the load factor, the bank angle, the lift coefficient and the thrust and power required for the motion. The results obtained apply to both types of airplanes: those with internal combustion engines and propellers, and those with jet engines. Conditions on the trajectory parameters are derived, which guarantee its flyability according to the dynamical properties of a given airplane. An analytical procedure is described that ensures that all these conditions are satisfied, and which can serve for producing tables from which the trajectory flyability can be read. Sample calculations are shown for the Cessna 182, a Silver Fox like unmanned aerial vehicle, and an F-16 jet airplane.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 1999년도 Japanese Journal of Medical Physics
• /
• pp.162-163
• /
• 1999

• 산업공학
• /
• 제3권2호
• /
• pp.23-38
• /
• 1990

The use of robots for painting operations is a powerful alternative as a means for automation and quality improvement. A typical method being used for motion planning of the painting robot is to guide the robot along the desired path : the "lead-through" method. Although this method is simple and has been widely used, it has several drawbacks a) The robot cannot be used during the teaching period, b) A human is exposed to a hostile environment, c) The motions taught are, at best, human's skill level. To deal with the above problems, an integrated robot-trajectory planning scheme is presented. The new scheme takes CAD data describing the shape and geometry of the objects, and outputs an optimal trajectory in the sense of coating thickness and painting time. The purpose of this paper is to investigate theoretical backgrounds for such a scheme including geometric modeling, painting mechanics and robot trajectory planning, and develop algorithms for generating spray gun paths and minimum-time robot trajectories. Future study is to implement these algorithms on an workstation to develop an integrated software system ; ATPS(Automatic Trajectory Planning System) for spray painting robots.

• 한국지능시스템학회논문지
• /
• 제15권4호
• /
• pp.418-424
• /
• 2005

선박의 안전 운항과 운항 경비의 절감을 위해 선박의 운항 자동화 및 지능화 기술이 요구된다. 선박의 자동화를 위해서는 GPS와 전자해도에 기반한 항해시스템의 항로 계획이 선행되어야 한다. 본 논문에서는 항해시스템의 자동화된 항로 계획을 위해 장애물의 접점 산출 기법과 이를 이용한 트리 생성 기법, 그리고 생성된 트리 구조를 기반으로 한 항로 산출 기법을 제안한다. 제안한 항로 산출 기법의 효율성 검증을 위해 최적화 관점에서 대표적 항로 계획 기법인 A*기법과 비교$\cdot$분석한다.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.105-111
• /
• 2003

This paper presents an approach to automate process planning of press dies for manufacturing of car bodies. Considering that the press-dies used at the same press operations regardless of the panels they produce or the car models of which they produce panels have similar shapes except for the forming part of the dies, general approaches to recognize manufacturing features from CAD models are not necessary. Therefore, a hybrid approach is proposed combining feature-based design and feature-extraction approaches. The proposed method recognizes features by parsing the parameters extracted from CAD models and finds proper operations by querying the database by the recognized features. An internet-based process planning system is developed to demonstrate the proposed approach and to suggest a new paradigm of process planning system that utilizes an internet access to the CAD system.