• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.3023-3031
• /
• 2013

본 논문에서는 물류회사에서 수작업으로 이루어지던 물류 배달 구분 작업을 자동화하기 위한 로봇 제어 정보 관리 시스템을 제안한다. 제안한 로봇제어 정보 관리시스템은 3D 영상인식장치로부터 소포의 가로, 세로, 높이, 집는 윗면의 형태 등 소포 형상정보와 무게, 놓여 진 위치, 부대 정보를 기록한 바코드 등의 소포 상황 정보를 넘겨받아서 로봇 매니퓰레이터의 픽업 제어정보와 드롭 제어정보를 생성하여 로봇제어정보를 보내준다. 로봇 매니퓰레이터는 물류 정보에 따른 픽업제어 정보와 드롭 제어정보를 넘겨받아 소포 픽업과 배달 위치에 따른 파레트에 해당물류를 드롭 할 수 있게 된다. 제안된 물류배달을 위한 로봇 제어 정보 관리 시스템은 수작업으로 처리되었던 물류배달 순서 구분 작업을 자동화함으로써 물류 배달에 있어 시간과 비용을 절감시키고 산업재해를 예방하는데 크게 기여하게 될 것이다.

• 소성∙가공
• /
• 제12권2호
• /
• pp.151-160
• /
• 2003

In the present study, an advanced surface construction method based on NURBS surface scheme is proposed to construct the extrusion die surface. The inlet and outlet profiles we precisely described with NURBS curves using the cubic appropriate control points and weights. The interior control Points of surface are generated using the cubic interpolation of the weights at the inlet and outlet sections. In order to verify of the proposed method, automatic surface generation is carried out for the various types of extrusion die surface.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.363-367
• /
• 2011

In this paper a simulator for Integrated Onboard Signalling System(IOSS) will be presented and illustrated. IOSS which is integrated with there signalling systems such as ERTMS/ETCS Level 1 ATP(Automatic Train Protection), ATC(Automatic Train Control) and ATS(Automatic Train Stop) is a signalling system for HEMU-400X(Highspeed Electric Multiple Unit - 400km/h eXperiment). HEMU-400X is under development as the next generation high-speed train in Korea. Before conducting a trial run of HEMU-400X with IOSS, we must carry out functional test of IOSS. The simulator is suggested in this paper for testing and verification of IOSS. The simulator can help to test all function of IOSS although a real train and trackside equipments are not existed. Also the simulator can make a fault in trackside equipment intentionally. In that scenario, we can figure out how IOSS handle emergency situations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1144-1148
• /
• 1991

The problems occurred when developing a automatic wheel deburring system are to make effective flexibility in model change and the irregularity of the position/shape of the burr, to select optimal robotic manufacturing process and to develope optimal end effector. The locations where burr exists are on flange, rim and spoke. Here will be discussed the optimal solution for the removal of rim burr by using robot. The research can be summarized as the automatic robot path generation by recognizing rim contour and automatic deburring process technique. Various rim contour data is generated automatically when the sensor which is fixed to robot is moving with the parallel motion to the wheel center axis and this generated data is transferred to the data storage system and converted to the robot path data. The robotic tool system which is suitable to the rim deburring process is developed by integrating tool, compliance function and sensor. And factory automation system controlled by robot controller and PC is developed. This system shows good productivity and flexibility.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.29-33
• /
• 2002

In order to utilize remote sensed images widely, it is necessary to correct geometrically. Traditional approaches to geometric correction require substantial human operations. Such substantial human operations make geometric correction a laborious and tedious process. In this paper, We introduce concept of GCP(Ground Control Point) Chip and generate a GCP Chip for automatic geometric correction. GCP Chip is small image patch which has a GCP in reference coordinate image. GCP Chip will be used to match new images in geometric correction. We generated GCP chip using Landsat-7 ETM+ panchromatic band image in this study. Henceforth this result will support automatic process in geometric correction.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.318-321
• /
• 2003

In order to generate the extrusion die surface of non-symmetric H- and U-shaped sections, an automatic surface construction method based on B-spline surface and scalar field theory is proposed in this study. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.197-200
• /
• 2003

An automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of complicated sections in this paper. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• 한국인터넷방송통신학회논문지
• /
• 제13권5호
• /
• pp.49-54
• /
• 2013

1.25Gbps PON(Passive Optical Network)용 버스트 모드 광 수신기를 설계하고 $0.8{\mu}m$ BiCMOS공정을 사용해 제작하였다. 지수함수 증폭기를 이용하여 AGC(Automatic Gain Control) 신호 생성 소요 시간을 단축시켜 버스트 앞부분의 데이터 손실을 최소화하였다. 측정결과 버스트 모드 광 수신기의 AGC 기능은 정상적으로 잘 동작하고 특성도 양호함을 확인하였다. 한편, 아이패턴의 아이는 열려있기는 하나 심한 파형 왜곡이 있고, 이로 인해 지터 특성 저하되고 있었다.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.71-77
• /
• 2001

On-machine measuring system of Numerically Control(NC) machines permit computer control of basic material cutting processes of moulds. A part of mould designed within a CAD/CAM system can be manufactured by generation of tool paths by the measuring systems. Since the three-dimensional geometry by AutoCAD of the part is contained in the data base, the manufacturing specialist combined with the appropriate software simulation, can not only create the commands to drive the virtual measuring and standardization of measuring modules but also can check for mistakes by viewing the computer graphics simulation of the tool cutting sequence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.357-359
• /
• 2000

This paper is to introduce the R&D project called "Improvement of Automatic Gene-ration Control Related Systems for New Energy Management system". The principal objective of this project is to demonstrate AGC operation capabilities that are suitable to new EMS environment and to show the validity of Set-Point Control Method. A number of developments and enhancements have been made to the generator's Remote Terminal Unit in which new ASTC is being developed and installed. The so-called ACC Signal Transfer Card(ASTC) will include RTU's Set-Point Control capabilities. It is expected that over next few months both RTU & DCS software modifications will be given and a relatively new Set-Point Control Method will be chosen instead of those from more conventional method, pulse control method.