• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.34-40
• /
• 2008

his study discusses the design of an automatic berthing control algorithm for ships with a haw thruster and a stern thruster, as well as a rudder. A nonlinear mathematical model for the law speed maneuvering of ships was used to design a MIMO (multi-input multi-output) nonlinear control algorithm. The algorithm consists of two parts, the forward velocity control and heading angle control. The control algorithm was designed based on the longitudinal and yaw dynamic models of ships. The desired heading angle was obtained by the so-called "Line of Sight" method. An optimal control force allocation method forthe rudder and the thrusters is suggested. The nonlinear control algorithm was tested by numerical simulations using MATLAB, and showed good tracking performance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.168-169
• /
• 2022

In this study, we investigates the auto-berthing problem for the underactuated surface vessel in the presence of constraints of dynamic uncertainties, finite time, transmission load, and environmental disturbance. A novel control scheme is proposed by fusing the finite time control technology and the event-triggered input algorithm. In the algorithm, differential homeomorphism coordinate the transformation is used to solve the problem of underactuation. Then, we apply the finite time technology and event triggered to save the time of the berthing vessel and relieve transmission burden between the controller and the vessel respectively. Moreover, a radial basis function network is used to approximate unknown nonlinear functions, and minimum learning parameters are introduced to lessen the computational complexity. A sufficient effort has been made to verify the stability of the closed-loop system based on the Lyapunov stability theory. Finally, simulation results display the effectiveness of the proposed scheme.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.10-17
• /
• 2010

Conventionally, because it is difficult to control a ship in shallow water and because attempting to do so creates unwanted environmental effects, maneuvering ships in the harbor area for berthing is usually done with the assistance of tugboats. In this paper, we propose a new method for berthing ships automatically by using bow and stern thrusters. Specifically, a steering motion model of a ship is considered, and parameters in the equation are evaluated by the system identification technique. An optimal controller based on observations was designed from the linearization of the non-linear ship motion in the horizontal plane. It is used to reduce the uncertainty about the ship's dynamics and reduce measurement requirements. The performance of the controller was also analyzed for its robustness relative to avoiding disturbing the environment due to winds, currents, and wave-drift forces. Experiments were conducted to estimate the potential for identifying result and the design of the controller. Specifically, in this paper, the system modeling and tracking control approach are discussed based on a two-degree-of-freedom (2DOF) servo-system design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.17-20
• /
• 2013

Many researches have been conducted in the field of constructing controllers for ships over 20 years. But still, ship automatic track-keeping controllers has not been designed for ship's automatic berthing as they considered nearly constant ship's speed. This study dealt with this problem to design track-keeping control on ship's model of SAE NURI using nonlinear mathematical expression. By using this control, the ship is auto track-kept in fare-way at reducing speed to anchorage place. The simulation results proved that this control can be adapted in ship's auto berthing in near future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1036-1043
• /
• 2022

This paper discusses about the development of a visual sensor that can be installed in an automatic mooring device to detect the berthing condition of a vessel. Despite controlling the ship's speed and confirming its location to prevent accidents while berthing a vessel, ship collision occurs at the pier every year, causing great economic and environmental damage. Therefore, it is important to develop a visual system that can quickly obtain the information on the speed and location of the vessel to ensure safety of the berthing vessel. In this study, a visual sensor was developed to observe a ship through an image while berthing, and to properly check the ship's status according to the surrounding environment. To obtain the adequacy of the visual sensor to be developed, the sensor characteristics were analyzed in terms of information provided from the existing sensors, that is, detection range, real-timeness, accuracy, and precision. Based on these analysis data, we developed a 3D visual module that can acquire information on objects in real time by conducting conceptual designs of LiDAR (Light Detection And Ranging) type 3D visual system, driving mechanism, and position and force controller for motion tilting system. Finally, performance evaluation of the control system and scan speed test were executed, and the effectiveness of the developed system was confirmed through experiments.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.21-25
• /
• 2009

The ship without thrusters and special propulsion system is supported by the tug boats during berthing and unberthing. The orders to tug boats are made by a pilot. If the positions of ship, tug boats and port are displayed in 2D map, it will be helpful to pilots. In this research, a network-based pilot supporting system(NPSS) has been conceptually designed NPSS, necessary for safe and efficient pilot, has two main functions. One is the monitoring of the situation of berthing and unberthing. And the other is the automatic calculation of the tug forces considering environmental conditions. The NPSS is designed on the basis of network system around the harbor. The NPSS will be validated using ship-handling simulator in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.15-16
• /
• 2014

As trade cross the world is increasing these days, safe and effective management of harbour system is becoming important issue. With this background, the development of automatic time-domain simulation programme for ship berthing operation has been being peformed and PD (Proportional Derivative) controller has been used to control the speed and the heading angle of ships. This paper provides feasibility study for developing the time-domain simulation programme for berthing operation of ships with analysing advantages and drawbacks of the two different mathematical models, one is for low advance speed of ships by Kose (1984) and the other is MMG model for normal advance speed, through the simulations with various initial heading angles and positions of the ship.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.3
• /
• pp.165-176
• /
• 2009

The process of berthing/deberthing operations for entering/leaving vessels in Busan northern harbor was analyzed and evaluated by using an integrated VTS(vessel traffic service) system installed in the ship training center of Pukyong National University, Busan, Korea. The integrated VTS system used in this study was consisted of ARPA radar, ECDIS(electronic chart display and information system), backup(recording) system, CCTV(closed-circuit television) camera system, gyro-compass, differential GPS receiver, anemometer, AIS(automatic identification system), VHF(very high frequency) communication system, etc. The network of these systems was designed to communicate with each other automatically and to exchange the critical information about the course, speed, position and intended routes of other traffic vessels in the navigational channel and Busan northern harbor. To evaluate quantitatively the overall dynamic situation such as maneuvering motions for target vessel and its tugboats while in transit to and from the berth structure inside a harbor, all traffic information in Busan northern harbor was automatically acquired, displayed, evaluated and recorded. The results obtained in this study suggest that the real-time tracking information of traffic vessels acquired by using an integrated VTS system can be used as a useful reference data in evaluating and analyzing exactly the dynamic situation such as the collision between ship and berth structure, in the process of berthing/deberthing operations for entering/leaving vessels in the confined waters and harbor.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.299-300
• /
• 2013

In this study, the time-domain simulations have been performed for analysing the ship behaviour during berthing process with comparing the two different mathematical models for low and normal advance speed of a ship and the results have been presented. For the first step of programming, the traditional PD (Proportional Derivative) controller has been used for the control of speed and rudder and a tanker ship has been used as a simulation model. This study provides comparative results on the time-domain simulation of berthing operation of a ship for developing an effective simulation programme.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.980-991
• /
• 2023

To prevent accidents near the quay caused by a ship, ports are generally designed and constructed through navigation and berthing safety assessment. However, unpredictable accidents such as ship collisions with the quay or personal accidents caused by ropes still occur sometimes during the ship berthing or mooring process. Automatic mooring systems, which are equipped with an attachment mechanism composed of robotic manipulators and vacuum pads, are designed for rapid and safe mooring of ships. This paper deals with a displacement and velocity measurement system for the automatic mooring device, which is essential for the position and speed control of the vacuum pads. To design a suitable system for an automatic mooring device, we first analyze the sensor's performance and outdoor environmental characteristics. Based on the analysis results, we describe the configuration and design methods of a displacement and velocity measurement system for application in outdoor environments. Additionally, several algorithms for detecting the sensor's state and estimating a ship's velocity are developed. The proposed method is verified through some experiments for displacement and speed measurement targeted at a moving object with constant speed.