• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.167-174
• /
• 2016

Runway and taxiway is base facilities for aircraft take off and landing and runway capacity is one of major factor for airport capacity. Runway occupancy time is affect on the runway capacity. The identification of aircraft using taxiway by analysis of airport ground surveillance data and the measurement of pass time on the points is general method for the confirmation of the runway occupancy time. This study is runway occupancy time analysis of landing airplane using ADS-B message, in this study we surveyed landing aircraft runway occupancy time and analysis of serviced record using taxiway include rapid exit taxiway. The result of analysis is to confirm the different of landing direction and aircraft category on the same runway caused by structure of airport. Also the result of runway occupancy time analyzed data, it is base input data for the air transportation simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.347-350
• /
• 2007

An ECG analysis with activity monitoring for the home care of elderly persons or patients, using wireless sensors technology was design and implemented. The changes in heart rate occur before, during, or following behavior such as posture changes, walking and running. Therefore, it is often very important to record heart rate along with posture and behavior, for continuously monitoring a patient's cardiovascular regulatory system during their daily life activity. The ECG and accelerometer data are continuously recorded with a built-in automatic alarm detection system, for giving early alarm signals even if the patient is unconscious or unaware of cardiac arrhythmias. The hardware allows data to be transmitted wirelessly from on-body sensors to a base station attached to server PC using IEEE802.15.4. If any abnormality un at server then the alarm condition sends to the doctor' PDA (Personal Digital Assistant).

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10797-10801
• /
• 2015

Background: To explore the molecular mechanisms of metastatic osteosarcoma (OS) by using the microarray expression profiles of metastatic and non-metastatic OS samples. Materials and Methods: The gene expression profile GSE37552 was downloaded from Gene Expression Omnibus database, including 2 human metastatic OS cell line models and 2 two non-metastatic OS cell line models. The differentially expressed genes (DEGs) were identified by Multtest package in R language. In addition, functional enrichment analysis of the DEGs was performed by WebGestalt, and the protein-protein interaction (PPI) networks were constructed by Hitpredict, then the signal pathways of the genes involved in the networks were performed by Kyoto Encyclopaedia of Genes and Genomes (KEGG) automatic annotation server (KAAS). Results: A total of 237 genes were classified as DEGs in metastatic OS. The most significant up- and down-regulated genes were A2M (alpha-2-macroglobulin) and BCAN (brevican). The DEGs were significantly related to the response to hormone stimulus, and the PPI network of A2M contained IL1B (interleukin), LRP1 (low-density lipoprotein receptor-related protein 1) and PDGF (platelet-derived growth factor). Furthermore, the MAPK signaling pathway and focal adhesion were significantly enriched. Conclusions: A2M and its interactive proteins, such as IL1B, LRP1 and PDGF may be candidate target molecules to monitor, diagnose and treat metastatic OS. The response to hormone stimulus, MAPK signaling pathway and focal adhesion may play important roles in metastatic OS.

• Journal of Korea Multimedia Society
• /
• v.11 no.9
• /
• pp.1245-1257
• /
• 2008

The establishment of a production pipeline imported 30 computer graphics is suggested in this paper to improve the efficiency of existing production pipeline of clay animation. The point is that the process of building clay characters that remains labor intensive among the existing procedures is replaced by the process of creating computer generated characters. In order to create characters out of clay by means of 30 computer graphics, a diffuse map and displacement map are made of an oil-based clay according to the UVW coordination of polygon modeling, which is the same color and kind of clay used to make a clay character. In addition, a panoramic HDRI recording system is developed to record the lighting information of shooting environment for miniature sets, which is imported in 3D computer graphic tools as digital light source. On account of the new production pipeline, a hyper realistic rendering image can be produced, and at the same time it improves the traditional pipeline of stop motion animation that is know-how based procedure of a complete artist by the engineering approach to the automatic process.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.123-135
• /
• 2007

In the recent years, the companies have manually recorded a production status in a work diary or have mainly used a bar code in order to collect each process's progress status, production performance and quality information in the production and logistics process in real time. But, it requires an additional work because the worker's record must be daily checked or the worker must read it with the bar code scanner. At this time, data's accuracy is decreased owing to the worker's intention or mistake, and it causes the problem of the system's reliability. Accordingly, in order to solve such problem, the companies have introduced RFID which comes into the spotlight in the latest automatic identification field. In order to introduce the RFID technology, the process flow must be analyzed, but the ASME sign used by most manufacturing companies has the difficult problem when the aggregation event occurs. Hence, in this study, the RFID logistic flow analysis Modeling Notation was proposed as the signature which can analyze the manufacturing logistic flow amicably, and the manufacturing logistic flow by industry type was analyzed by using the proposed RFID logistic flow analysis signature. Also, to monitor real-time information through EPCglobal network, EPCISEvent template by industry was proposed, and it was utilized as the benchmarking case of companies for RFID introduction. This study suggested to ensure the decision-making on real-time information through EPCglobal network. This study is intended to suggest the Modeling Notation suitable for RFID characteristics, and the study is intended to establish the business step and to present the vocabulary.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.4
• /
• pp.268-275
• /
• 2014

In future, hospitals are expected to automatically issue remote transcriptions. Many general hospitals are planning to encrypt their medical database to secure personal information as mandated by law. The electronic medical record system, picture archiving communication system, and the clinical data warehouse, amongst others, are the preferred targets for which stronger security is planned. In the near future, medical systems can be assumed to be automated and connected to remote locations, such as rural areas, and islands. Connecting patients who are in remote locations to medical complexes that are usually based in larger cities requires not only automatic processing, but also a certain amount of security in terms of medical data that is of a sensitive and critical nature. Unauthorized access to patients' transcription data could result in the data being modified, with possible lethal results. Hence, personal and sensitive data on telemedicine and medical information systems should be encrypted to protect patients from these risks. Login passwords, personal identification information, and biological information should similarly be protected in a systematic way. This paper proposes the use of electronic acupuncture with a built-in multi-pad, which has the advantage of being able to establish a patient's physical condition, while simultaneously treating the patient with acupuncture. This system implements a sensing pad, amplifier, a small signal drive circuit, and a digital signal processing system, while the use of a built-in fuzzy technique and a control algorithm have been proposed for performing analyses.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.9 no.1
• /
• pp.221-240
• /
• 1998

This study concerns information quality of the database which has been produced in the ASKERIC database. The measures used in this study were accuracy of the records. consistency, completeness and currency. Accuracy was measurred in terms of the keywords used in different ways in the US and Britain and the spelling errors in the records. Consistency was measured in terms of 'see also' and 'see reference' mechanism and character capitalization. Completeness was measured as follows： completeness of the search fields in the record and relevance of search fields. Currency was measured using the publication date. The experimental result showed that ERIC databases had some errors in terms of accuracy. consistency. completeness and currency. However, continuous striving for the automatic error checking functions and the policy of feedback from users have contributed to the improvement of the quality in ERIC databases.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.427-435
• /
• 2019

Soundscape provides important resources to understand social and cultural aspects of our society, however, it is still its infancy to study on the research framework to record, conserve, categorize, and analyze soundscapes. Topic modeling is an automatic approach to discover hidden themes that are disperse in unstructured documents, thus topic modeling is robust enough to find latent topics such as research trends behind a collection of documents. The purpose of this paper is to discover topics on current soundscape research based on topic modeling, furthermore, to discuss the possibilities to design a metadata system for sound archives and to improve Soundscape Ontology which is currently developing.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.5
• /
• pp.456-464
• /
• 2023

In this study, a compact hydrogen liquefaction system was constructed with the aim of creating a data storage and monitoring program for liquid hydrogen production. This program was designed to receive and record signals from diverse control equipment through the LabVIEW software. A range of measurement instruments were devised to collect data, encompassing variables such as flow rate, pressure, temperature, and liquid level. As a result, it was possible to directly check the production of liquid hydrogen by obtaining various data of condensed liquid hydrogen. In addition, it was confirmed that long-term storage of liquid hydrogen is possible by developing automatic ON/OFF through the LabVIEW program.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.2
• /
• pp.209-224
• /
• 1999

I have practiced this reserch for the purpose of proposition of basic data for amendment and addition of computer system after I surveyed the degree of abilities and satisfaction on the computerization in nursing\ practice. Subjects were collected from September 1 to September 30, 1998. Study subjects are 151 clinical nurses who are working at university hospital in Chonbuk area. Study instrument consists of 116 questionnaire which was developed by Kim H. K(1998). The data were analized number, mean ,t-test, ANOVA by using SPSS. The study results are as follows: 1. Most of the nurses who answered the questions were educated computerizing(96%). The abilities of computer program utilities were the most in inputting data(74%). The program nurses wanted computerizing education was wordprocess, dealing internet and statistics. 2. As for applying parts of computer system in nursing, the most nurses were Dr's order check (96%), treatment activity(91.4%), medication(89.4%), lab. test(87 .4%), transfering department(85.4%), transfering room(79.5%), diet(71.8%), discharge (70.2%), Barcord Sticker(70.2%) , reservation(62.2%) in order that were all conected order system mutually to other part. It showed that computer system was not applied for treating the original nursing work such as nursing record (13%), duty scheduling(6.0%) , nursing process(4.6%) , Q.I(1.3%), nursing research(1.3%), education(1.3%), 3. As for the benefit when computer system is applied for, the most respondence was promptness of work and convenience(90.6%) , exactness of work (82.8%), offering information exactily and efficiently(36.3%), offering good quality of nursing (6.0%) in order. 4. The degree of contentment on computerizing in nursing practice showed average 3.24%. The best marking item is that they are eager to participate in the computer education. Next, the automatic output of label and giving the number automatically is to prevent loss and mentioned items of patient registration from being changed(3.95) and to prevent mistakes possibly happening because of doctor's difficult order(3.85). 5. The problems which may happen to in nurses' utilization of computerization for the nursing practice showed average 3.18. The most problem is that the practice may stop because of the problem of computer itself(3.67), and the next, the indication of act can be imperfect(3.66) , manual training may overlap because of incomplete computerization (3.60), practical education for the computerizing is lack(3.41), and the computer literate nurses are lack(3.40) . 6. Study subject's contentment by age was significant difference(F=3.10,P=0.0119). Study subject's contentment by job posision was significant difference(F=6.001P=0.0034) I will propose the following according to the above results. The domain of original nursing practice is urgernt. Manual and indication of act should be made before long in computer obstacle. Nursing department should support the nurses so that they could receive the education needed for the nurses themselves.