• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.172-174
• /
• 2007

An electronic watt-hour meter with high-precision measurement technology can provide many valuable metering data of a real-time system measurements, such as per-phase voltage, ampere, active power, reactive power, apparent power, power factor, and system frequency. Also many of accumulated metering data such as active energy, reactive energy, apparent energy, and load profile can be gettable from an electronic watt-hour meter[1]. This paper presents an approach of the small-sized AMR (Automatic Meter Reading) that provides customers with a very valuable electrical service. This AMR service transmits lots of a valuable metering data by using ZigBee communication module, so that users resided in their premises can use the information to audit a power quality and improve their electrical conditions by using the PQ monitoring device equipped with ZigBee receiver. This PQ monitoring device shows metering data on LCD and transmits to the PC through an internal network. Also, the device can keep the valuable meter data into a built-in non-volatile memory. The final goal of this paper is to better understand the power quality of electrical systems and offer the power qualify information for the convenience of all power consumers.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.97-100
• /
• 2007

최근 무선 통신 서비스의 증가로 다양한 안테나 모델의 개발이 이루어지고 있으며 안테나 성능 시험을 정확하고 합리적으로 평가할 수 있는 측정 기술에 대한 정량적인 연구의 필요성이 부각되고 있다. 본 논문에서는 안테나의 근역장 측정 시스템에서 안테나 특성의 자동 측정 시스템을 구축하기 위한 안테나의 끝단을 정렬하기 위한 알고리즘을 제안한다. 제안 알고리즘은 안테나의 하면 영상을 카메라로 입력받아 객체를 추출하고 안테나 객체의 윤곽선을 추출한다. 추출된 윤곽선 정보를 이용하여 객체의 왜곡정도를 측정하며 이를 보정하기 위한 각도를 추출한다. 제안한 알고리즘의 성능을 측정하기 위해 표준 혼 안테나를 이용하였으며 그 결과는 안테나 객체가 효율적으로 추출되고 왜곡 보정을 위한 각도도 측정됨을 보여준다.

• 한국주거학회논문집
• /
• 제25권2호
• /
• pp.11-18
• /
• 2014

This study looked at designing, building and operating temporary camp, the first structures that South Korea built in the Antarctica. While there may be differences in accordance with the topography, ground surfaces in the Antarctica are covered broken stones, glaciers and snow. Hence, such topographical characteristics should be taken into account when conducting any construction work. To ensure successful assembly construction in the Antarctica using modules, prior trial assembly work should be done in Korea to identify any possible trouble in the actual construction process. Assuming that the workers will have to spend at least one winter in the temporary camp, the work will be more severely affected by adverse weather conditions and snow drift, resulting in the need to clear snow. This can be by designing roofs with curved surfaces. Also, quantitative effects will need to be verified through simulation and actual measurement. It will also be necessary to assess the camp's thermal environment and examine its air-conditioning methods. To identify the temporary camp's thermal system, the temperatures and humidities were measured, and the heating system was designed not to offer automatic control or desired value selection functions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.277-284
• /
• 2000

Using the large diameter (D ＝ 2,500mm, L ＝ 40m) batter steel pipe piles, designed as compression piles but used as reaction piles during the static compression load test of socketed test piles (D ＝ 1,000mm, L ＝ 40m), static pile load tests for large diameter instrumented rock-socketed piles were performed. The reaction steel pipe piles were driven 20m into the marine deposit and weathered rock layer and then l0m socketed with reinforced concrete through the weathered rock layer and into hard rock layer. Steel pipe and concrete in the steel pile part, and concrete and rebars in the socketed parts were instrumented to measure strains in each part. The pullout amounts of reaction pile heads were also measured with LVDT. During the static pile load test, total compressional load of about 20MN was loaded on the head of test piles, but load above 20MN was not loaded due to lack of loading capacity of loading system. Over the course of the study, maximum pullout amount up to 7mm was measured in the heads of reaction piles when loaded op to 10MN and 1mm of pullout amount was measured. More than 85% of pullout load was transfered in the residual weathered rock layer and about 10% in the soft rock layer, which was somewhat different transfer mechanism in the static compressional load tests.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.287-297
• /
• 2006

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. One of inherent limitations of particle holography is the very long depth of field of particle images, which causes considerable difficulty in the determination of particle positions in the optical axis. In this study, we introduced three auto-focusing parameters corresponding to the size of particles, namely, Correlation Coefficient, Sharpness Index, and Depth Intensity to determine the focal plane of a particle along the optical axis. To investigate the suitability of the above parameters, the plane image of dot array screens containing different size of dots was recorded by diffused illumination holography and the positions of each dot in the optical axis were evaluated. In addition, the effect of particle position from the holographic film was examined by changing the distance of the screen from the holographic film. All measurement results verified that the evaluated positions using suggested auto-focusing parameters remain within acceptable range of errors. These research results may provide fundamental information for the development of the holographic velocimetry system based on the automatic image processing.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.365-373
• /
• 2011

This paper presents the dynamic response and the vibration characteristics for a rail-track supported by discrete springs and dampers. Recently, automatic conveyer system, rail-track, rack-master system demand the soundproof facilities and vibration suppression measures in order to satisfy the strict environmental standards. The equations of motions of the dynamic characteristics for a vibration suppression rail-track under a traveling mass were derived by Galerkin's mode summation method considering gravity, centrifugal force, Coriolis force, inertia force of the moving mass, transverse inertia of the rail-track. Also, numerical results were calculated by Runge-Kutta integration method. In order to investigate vibration characteristics and dynamic responses, modal testing and measurement of the responses of the rail-track were performed. Through the experiment and numerical simulations, numerical results have a good agreement with experimental ones.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1706-1712
• /
• 2012

The Beta-ray absorption method (BAM) gives a good solution for measuring the mass concentration of atmospheric particles(PM10 and PM2.5). To determine particular matters (PM) concentration, a ratio of the number of detected beta-ray intensity passing through the clean filter and the dust-sampled filter is used. These intensity data measured in air pollution monitoring such as PM10 and PM2.5 usually contained the additive noise(thermal noise, power supply noise and etc.). Therefore, the estimation performance of mass concentration can be deteriorated by these noises. In this paper, we present a new noise reduction method that is essentially required to develope an automatic continuous PM monitoring system using beta-ray absorption method. By combining the block data averaging technique and curve fitting, in the proposed method, the additive noise can be reduced in the measured data. To evaluate the performance of the proposed method, computer simulations were performed with computer generated signals as the input.

• 한국추진공학회지
• /
• 제12권5호
• /
• pp.60-66
• /
• 2008

각종 무기체계에서 포구속도는 보다 정확한 사격제원을 산출하기 위한 자동사격통제시스템의 기초 데이터로 활용될 수 있다. 그러나 전장환경의 여러 변수들을 고려한다 해도 동일한 탄약(추진제)에서 발생하는 불규칙적인 성능특성은 정확한 포구속도 데이터를 얻는 것을 곤란하게 한다. 본 논문에서는 강내 압력을 측정하고 약실압력과 탄저압력의 실험적 관계식을 구하여 포구속도를 산출하는 방법에 대하여 연구하였다. 이러한 방법을 통해 추진제의 불규칙적인 성능특성을 보정한 포구속도를 얻음으로써 보다 정확한 데이터를 제공할 수 있으리라 생각한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.251-251
• /
• 2016

인공위성을 이용한 가뭄연구에는 전지구적으로 운용되는 GPM (Global Precipitation Measurement) 위성, AQUA/TERRA 위성의 MODIS (MODerate resolution Imaging Spectroradiometer) 센서 등에서 수집된 관측 자료가 이용된다. 그러나 전지국적으로 관측된 위성 자료는 자료를 생산 제공하는 기관에 따라 자료의 파일포맷 (NetCDF, HDF5, GeoTIFF 등), 자료의 투영법 (projection) 등이 상이하다. 그러므로 가뭄연구에 다중위성자료를 활용하고자 하는 지리정보시스템(Geographic Information System: GIS)에 대한 전문지식이 부족한 연구자는 자료의 표준화 (파일포맷과 투영변환 등) 과정으로 인해 원활한 연구수행이 어렵다. MODIS 위성자료의 경우에는 일반적으로 많이 사용되는 횡단메르카토르 도법 (Transverse Mercator Projection: TM) 대신 시뉴소이드 도법 (sinusoidal projection)을 이용한다. 그래서 미국 지질조사국은 MODIS 자료의 재투영(reprojection)을 위한 전용 소프트웨어인 MRT (MODIS Reprojection Tool)를 배포하고 있다. 본 연구에서는 무료/오픈소스 소프트웨어를 활용하여 시뉴소이드 도법이 적용된 MODIS 자료의 수집, 재투영, 파일포맷 변환 등을 자동으로 처리하는 기법을 개발하여 가뭄활용에 이용하고자 하였으며, MODIS MOD09GA/MOD11A1 자료를 이용하여 효율성을 검증하였다.

• 사상체질의학회지
• /
• 제19권2호
• /
• pp.22-29
• /
• 2007

1. Objectives Sasang Contitutional Medicine, a part of the traditional Korean medical lore, treats illness through a constitutional typing system that categorizespeople into four constitutional types. A few of the important criteria for differentiating the constitutional types are external appearances, inner state of mind, and pathological patterns. We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the mechanical accuracy of the 3D-AFRA hardware. 2. Methods Several objects of different shapes (cube, cylinder, cone, pyramid) were each scanned 10 times using the 3D Automatic Face Recognition Apparatus (3D-AFRA). The results were then compared and analyzed with data retrieved through a laser scanner known for its high accuracy. The error rates were analyzed for each grid point of facial contour scanned with Rapidform2006 (Rapidform2006 is a 3D scanning software that collects grid point data for contours of various products and products and product parts through 3D scanners and other 3D measuring devices; the grid point data thusly acquired is then used to reconstruct highly precise polygon and curvature models). 3. Results and Conclusions The average error rate was 0.22mm for the cube, 0.22mm for the cylinder, 0.125mm for the cone, and 0.172mm for the pyramid. The visual data comparing error rates for measurement figures retrieved with Rapidform2006 is shown in $Fig.3{\sim}Fig.6$. Blue tendency indicates smaller error rates, while red indicates greater error rates The protruding corners of the cube display red, indicating greater error rates. The cylinder shows greater error rates on the edges. The pyramid displays greater error rates on the base surface and around the vertex. The cone also shows greater error around the protruding edge.