• Journal of the Korea Society for Simulation
• /
• v.16 no.1
• /
• pp.21-29
• /
• 2007

In this paper, we present a method of detecting the boundary of the intima-media complex for automated measurement based on dynamic programming from carotid artery B-mode ultrasound images and then show the experimental results. We apply the dynamic programming for determining the optimal locations that a cost function is minimized. The cost function includes cost terms which are representing image features such as intensity, intensity gradient and geometrical continuity of the vessel interfaces. Moreover, we improve the boundary continuity by applying the B-spline to smooth the rough boundary due to noise such as speckle, dropout and weak edges. The proposed method has obtained more accurate reproducible results than conventional edge-detection by considering multiple image features and ensures efficient automated measurement by solving the problems of the inter- and intra-observer variability and its inefficiency due to manual measurement.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.50-53
• /
• 2018

Cyclic measurement system using relay circuit for organic light emitting diode (OLED) was demonstrated. The OLED characterization such as current-voltage, impedance, and capacitance-voltage is performed in sequence, repetitively and automatically under full control of the personnel computer (PC) without changing the connection of cables. Owing to in situ degradation by cyclic measurement, the time dependence of the data can give good information on the reliability factor of the OLED devices. Therefore, both performance and reliability of the OLEDs can be evaluated, with no manual operation during the entire process.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.575-585
• /
• 1998

An automated surface-strain measuring system using the image processing technique is developed in the present study which consists of the hardware to capture and to display digital images. and the software to calculate the 3-D informations of grid points from two views. New or improved algorithms for the mapping and establishing correspondence of grid points and elements the camera calibration and the subpixel measurement of grid points are implemented. As an application of the present system the surface-strains of deformed blanks in the limitting dome height test the square cup deep-drawing and punch stretching to obtain the forming limit diagram are measured. The results are com-pared with those obtained by conventional manual methods.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.24-26
• /
• 2005

At present, KS-1000 which is one of a commercial measurement instrument for motor fault diagnosis has been used in industrial field. The measurement system of KS-1000 is composed of three part : harmonic acquisition, signal processing by KS-1000 algorithm, diagnosis for motor fault. First of all, voltage signal taken from harmonic sensor is analysed for frequency by KS-1000 algorithm. Then, based on the result values of analysis skilled expert makes a judgment about whether motor system is the abnormality or degradation state. But the expert system such a motor fault diagnosis is very difficult to bring the expectable results by mathematical modeling due to the complexity of judgment process. In this reason, we propose an automation system using fuzzy model based on genetic algorithm(GA) that builded a qualitative model of a system without priori knowledge about a system provided numerical input output data.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.298-302
• /
• 1996

The representative beat with high SNR could be obtained by the signal averaging, correct and fast detection of significant points and waveform boundary could be obtained by adoption of search interval. All experimental results of waveform boundary were compared with CSE database which had the 5 referees results and 11 ECG measurement programs. All results were within tolerance made by referees, especially the end point of T wave were more close to the referee's results than other 11 measurement programs. The diagnosis parameters that might be used in the Minnsota code criteria were extracted from the representative beat. The diagnostic classification were fulfilled using Minnsota code criteria. Through the comparison on the diagnosis results from designed automated ECG analyzer(YECGA) and the results ECG analyzer manufactured by Fukuda denshi(FCG-2201) in Japan, reliance of the performance on designed system(YECGA) could be validated.

• Journal of Environmental Science International
• /
• v.7 no.2
• /
• pp.203-208
• /
• 1998

A simple on-line measurement system consisting of a conventional peristaltic pump, a HPLC-type heater, and a flow-through spectrophotometer is introduced for the determination of chemical oxygen demand(CODI. The system was configured such that the reaction mixture in the highly concentrated surffuric acrid medium flowing through the PTFE reaction tubing was heated at 150℃ and the absorbance of dichromate was continuously moutored at 445 m. The same addation principle as in the standard procedure was employed akcept the use of CoSO4 as a new effective catalyst. To test the system, potassium hydrogen phthalate was selected as a COD standard material. With suitably optimized reaction condition, the applicable concentration range depends on the concentration of potassium dichromate in the oxidizing reagent. With 2.0×10-3 M and 5.0×10-4M dichromate, the linear dynamic range was observed up to 400 ppm and 100 ppm, respectively. The standards in the Unear ranges were shown to be completely oxidized, which was confirmed with sodium oxalate or Mohr's salt. In all cases, the typical reproduclbility for betweenruns was 2% or less. The proposed measurement system provides the valuable in- formation for the further development of automated analysis system based on the present standard procedure.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.99-104
• /
• 2004

Recently, the old surveying method for acquiring surveying-geo information results had a low economic efficiency and a low dependence of precision because it took much times and high costs. So, we acquired law data by execution of control surveying through Static positioning of DGPS(Ashtech). It is computed plainmetric(X, Y) positioning through postprocessing by Prism S/W. And we computed height(Z) through control surveying by ring-closed leveling surveying. After control surveying execution, we built DEM(Digital Elevation Model) using LDT S/W and accuracy 3D detail surveying by EDM(Electronic Distance Measurement) surveying. The purpose of this study was to yield automated digital mapping and the automated amount of materials using ahead data. The conclusions were as follows; First, we built the automated amount of materials system and got high efficiency about personnel, times and precision. Second, when, people precisely positioned on railroads of a high-speed railroad and used GPS surveying, the result was permitted. Finally, it was possible to draw automated profile and cross-section using the 3D terrain model build with the DEM technique.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2039-2044
• /
• 2011

A semi-continuous and automated method for quantifying atmospheric ammonia at the parts per billion level has been developed. The instrument consists of a high efficiency diffusion scrubber, an electrolytic on-line anion exchange device, and a conductivity detector. Water soluble gases in sampled air diffuse through the porous membrane and are absorbed in an absorbing solution. Interferences are eliminated by using an anion exchange devises. The electrical conductivity of the solution is measured without chromatographic separation. The collection efficiency was over 99%. Over the 0-200 ppbv concentration range, the calibration was linear with $r^2$ = 0.99. The lower limit of detection was 0.09 ppbv. A parallel analysis of Seoul air over several days using this method and a diffusion scrubber coupled to an ion chromatography system showed acceptable agreement, $r^2$ = 0.940 (n = 686). This method can be applied for ambient air monitoring of ammonia.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.465-467
• /
• 1998

A lane change maneuver is a part of lateral control of an automated highway system. Assuming no direct measurement of its position during transition from one lane to another. A vehicle is controlled to follow the virtual desired trajectory using only on-board sensors. This paper investigates the development of a fuzzy controller for automated lateral control during emergencies. The performance of the fuzzy controller is presented at 20m/s for a step lane change and a double lane change. The robustness of fuzzy controller is investigated with respect to change in tire parameters and the number of passengers.

• The Journal of Korean Association of Computer Education
• /
• v.15 no.6
• /
• pp.83-89
• /
• 2012

It becomes important for the countries with ageing populations to prepare coming u-health societies. Surely, the technology of u-health will help the elderly everywhere and everytime because the key concept is based on the combination of the ubiquitous and healthcare technology. In this paper, a design scheme is proposed to construct an automated diagnosis system of body fluid for u-health. Specifically, the system is comprised of embedded system, light generating system and photo sensing system. The system analyzes the diffused lights from the chemical reagent pads under LED lights and diagnoses a variety of diseases according to the predefined color values on specific diseases. As a result, the system is implemented as a hardware and shows the measurement accuracy of 95% in reliability.