• Korean System Dynamics Review
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2006

A container terminal should concentrate on efficient terminal operation in the long view and analyze an effect through introduction of hi-technology, automated equipments and intelligent information system, when they want to improve their reliability and competitive power in intense global competition. To do this, first this study finds out factors which affect competitive power of a container terminal, and relation between them. And then we used System Dynamics method to analyze an effect according to a value fluctuation of the factors in the long term.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.5 s.72
• /
• pp.57-62
• /
• 2006

The most important thing in acontainer terminal is to handle the cargo effectively in the limited time available. To achieve this objective, many strategies have been introduced and applied. To create an automated container terminal, it is necessary for the cargo handling equipment to be equipped with more intelligent control systems. From the middle of the 1990's, automated rail-mounted gantry cranes (RMGC) and rubber-tired gantry cranes (RTG) have been widely used to handle containers in yards. Recently, many pieces of equipment, like CCD cameras and sensors, have beenmounted in these cranes to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes, which allow for more effective cargo handling in yards. For this purpose, the modeling, tracking control, anti-sway system design, skew motion suppressing, and complicated motion control and suppressing problems must be considered. Especially, in this paper, the system modeling and a new tracking control approach are discussed, and an experimental study is performed based on a two-degree-of-freedom (2DOF) servosystem design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.317-323
• /
• 2006

The objective of this study is to test and modify the gantry travel mechanism of an ALV(automated lifting vehicle) as a main technology of development of ALV. For the purpose of the improvement of container terminal productivity, this study performed to develop the ALV as a part of R&D. In order to verify the design data and detect the errors of detailed drawings, we performed the various limited weight test under load and unload conditions. Through the reflect of final drawing based on the this test, we could use to produce the more complete vehicle.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.471-477
• /
• 2004

In this study, we introduce a 3-dimensional simulation to support the Design on ACT(Automated Container Terminal). This simulation system developed to simulate virtual operations of ACT using 3-dimensional simulation and animate the simulated results with real time. And the developed system applied an object-oriented design and C++ programming to increase the reusability and extensibility. We select several items of performance evaluation for objects used in ACT in terms of problem detection, problem forecast, and logic feasibility, and provide evaluation points for the design of ACT.

• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.85-94
• /
• 2008

Automated Guided Vehicles (AGVs) are important equipment in automated container terminals. To utilize AGVs for transporting containers from a position to another, the deadlock is a serious problem that must be solved before they are deployed to real operations. This study assumes that traveling area for AGVs are divided into a large number of grid-blocks and, as a method of traffic control, grid-blocks are reserved in advance during the travel of AGVs. The purposes of the reservation are to make the room between AGVs and to prevent deadlocks. Because the size of an AGV is much larger than the size of a grid-block on guide paths, this study assumes an AGV may occupy more than one grid-block at the same time. This study suggests a method for constructing a table of reservation schedules by using a simulation. A sensitivity analysis was conducted to evaluate the performance of the reservation method in this study.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.218-219
• /
• 2011

This paper focuses on dispatching strategy for AGVs(Automated Guided Vehicle). The goal of AGV dispatching problem is allocating jobs to AGVs to minimizing QC delay and AGV total travel distance. Due to the highly dynamic nature of container terminal environment, the effect of dispatching is hard to predict thus it leads to frequent modification of dispatching results. Given this situation, single rule-based approach is widely used due to its simplicity and small computational cost. However, single rule-based approach has a limitation that cannot guarantee a satisfactory performance for the various performance measures. In this paper, dispatching strategy based on multicriteria heuristics is proposed. Proposed strategy consists of multiple decision criteria. A muti-objective evolutionary algorithm is applied to optimize weights of those criteria. The result of simulation experiment shows that the proposed approach outperforms single rule-based dispatching approaches.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.493-501
• /
• 2014

An automated lifting vehicle(ALV) used in an automated container terminal is a type of unmanned vehicle that can self-lift a container as well as self-transport it to a destination. To operate a fleet of ALVs efficiently, one needs to be able to determine a minimum-time route to a given destination whenever an ALV is to start its transport job. To find a route free from any collision or deadlock, the occupation time of the ALV on each segment of the route should be carefully scheduled to avoid any such hazard. However, it is not easy because not only the travel times of ALVs are uncertain due to traffic condition but also the operation times of cranes en route are not predicted precisely. In this paper, we propose a routing method based on an ant colony optimization algorithm that takes into account these uncertainties. The result of simulation experiment shows that the proposed method can effectively find good routes under uncertainty.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.501-507
• /
• 2011

This paper focuses on dispatching strategy for AGVs(Automated Guided Vehicle). The goal of AGV dispatching is assigning AGVs to requested job to minimizing the delay of QCs and the travel distance of AGVs. Due to the high dynamic nature of container terminal environment, the effect of dispatching is hard to predict thus it leads to frequent modification of dispatching decisions. In this situation, approaches based on a single rule are widely used due to its simplicity and small computational cost. However, these approaches have a limitation that cannot guarantee a satisfactory performance for the various performance measures. In this paper, dispatching strategy based on multicriteria heuristics is proposed. The Proposed strategy consists of multiple decision criteria. A multi-objective evolutionary algorithm is applied to optimize weights of those criteria. The result of simulation experiment shows that the proposed approach outperforms single rule-based dispatching approaches.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.557-563
• /
• 2020

Digital Twin Technology is currently being utilized in many industries and logistics seems soon to follow that trend. Currently, technology introduction to container terminals is restrictedly developing. In reviewing the existing literature, it became clear that research on the application of Digital Twin technology for container terminals is deficient. This study fulfilled AHP and IPA analysis causing fields to adjust priority at the container terminal. The result of analysis on the urgent necessity of adjustable fields' detailed elements from Digital Twin Technology, ATC, intelligent CCTV, and container yards, and showed that they were of the highest priority level. Also, VR/AR Equipment, AYT, Smart Container, Automated Container Delivery Facility, Refrigerated/Freezer Container, Wearable Device for Port Maintenance, and Smart Buoy were reviewed in detail. Our group suggests AQC, Berth, AGV, ASC, Apron, and Automated Mooring as potentially useful Digital Twin Technologies. Finally, our research suggests the OSS equipment, intermodal linkage facility, intelligent drone, and hazardous material storage are areas of low priority.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.691-697
• /
• 2006

The objective of this study is to develop the alternative model of the container transport vehicle of high productivity for the purpose of the increase of terminal productivity. In order to develop the alternatives, we analyze the technical specification of existing transport vehicles such as YT(Yard Tractor), S/C(Straddle Carrier), SHC(Shuttle Carrier), and AGV(Automated Guided Vehicle) and investigate the operation and performance of transport vehicles to classify the technical generation. The development alternative of transport vehicle presented in this study will usefully be apply to advanced container terminal with higher productivity in near future.