• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.61-69
• /
• 2016

Since 2000, the market of convenient stores in Korea has developed rapidly due to the explosive growth in single households but it still consists mainly of manual work due to the nature of the domestic industry. Hence the explosive increase in demand in the market is mostly due to workers. Therefore, the research aimed at encouraging efficiency via automation, which is carried out in manufacturing, such as electronic, cars and so on, is inadequate. This study performed a feasibility analysis of investment for introducing an automated system on brand A, which is domestic famous convenience store company. Productivity growth according to the introduction of an automated guided vehicle and the cost-benefits was studied with using a simulation for the picking process, which is most personnel and time consuming. As a result, the simulation showed that the equipment AGV introduced for choosing the process has the effects of cost saving and increased time efficiency for performing manual labor. Furthermore, appropriate numbers of AGV were forecasted considering the capacity of the distribution Center in the brand A convenient store, which has been growing steadily. There are increasing numbers of worker labor costs in the distribution industry these days. Before building a large new automate center, it is expected to provide a good information to investors who are considering increasing productivity through partial automation of each of unit process to achieve some cost reduction.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.515-525
• /
• 2022

The wireless power transfer (WPT) charging system for AGV depends highly on the coupling conditions due to air gap variation. To attain stable output power with high transfer efficiency under various coupling conditions, a single-stage, DC-DC converter that operates with robustness to changes in air gaps is proposed for the WPT system. The proposed converter is capable of soft switching under the set input voltage (V_in: 380 V_DC), load conditions (0-1 kW), and air gap changes (30-70 mm). In addition, a wide output voltage range (Vo: 39-54 V_DC) can be controlled by varying the link voltage due to the phase control at a fixed switching frequency. Experimental results are verified using a prototype of a 1 kW wireless power charging system.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.93-98
• /
• 2005

The purposes of this paper are the review and derivation of design characteristics for the new construction of the practical flexible manufacturing system. The basic ideas to analyze the manufacturing system which is the automatically operated are dependant on the various manufacturing procedures in factory. The practical flexible manufacturing systems have various mechanical subsystems appropriated fur the final manufacturing products. Therefore the systems have the various kinds of hardwares as well as softwares. We study the software for the practical flexible manufacturing system designed and developed in the Halla University with the related company. Specially the design concepts and using specifications of all subsystems which are composed of mechanical and electronic movements of the product are analyzed and introduced in this dissertation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.333-338
• /
• 1993

In this paper, we introduce an industrial three degree of freedom manipulator which loads/unloads various freight on an AGV(automated Guided Vehicle). We design and implement the industrial controller for the manipulator with P-I) gain variation method. Since this battery-powered manipulator is opten driven in an instufficient power condition, the gravity effects on the robot joints can be a significant problem. The objectives of this paper are twofold : the presentation of a PI)-controller which can compensate the gravity effects, and the design and implementation of an industrial three degree of freedom manipulator for loading/unloading.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.586-589
• /
• 2001

This paper focuses on a method to connect mobile devices such as mobile robot, Automated Guided Vehicle(AGV) to a fieldbus. In this paper, the IEEE 802.11 wireless LAN is used to extend a Profibus-DP network for the mobile devices. In order to integrate these two networks, a protocol converter is developed with two process(i.e., master process of Profibus-DP and virtual master process of IEEE 802.11) and an transmission buffer. Futhermore, a virtual polling algorithm is developed at the protocol conveter in order to satisfy real-time requirements on data communication.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.506-511
• /
• 1996

The performance evaluation of flexible manufacturing systems or cells at the stages of design and planning is one of important issues in manufacturing. For that reason, Guo has presented an approachbased on moment generating function and generalized stochastic PetriNets for performance analysis. In this paper, Buo's approach is extended tothe cases of flexible manufacturing cell including one machining center with a local buffer, AS/RS(Automatic Storage and Retrieval System), set-up station and AGV(Automated Guided Vehicle). Then the performance measures from this approach is compared with simulation. The major advantage ofthis method over existing performance evaluation methods is the ability to compute analytic solutions for performance measures.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.215-224
• /
• 2008

In this paper, we introduced a linear motor-based transfer system with an active pid controller which can be replaced with an automated guided vehicle (AGV) for the port automation. This system, which is named LMCTS(liner motor-based container transfer system), is based on PMLSM (permanent magnetic linear synchronous motor) which basically consists of stator modules on the rail and shuttle car. Therefore more progressive and adaptive control mechanisms should be required to control a system with large variation of container weight, the difference of each characteristic of stator modules, a stator module's trouble etc. We introduced an active control mechanism with an online tuning scheme using modified evolutionary strategy. Some computer simulations are implemented to assess the robustness of the proposed system.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.195-206
• /
• 1998

By the rapid expansion of containerization and intermodal transportation in international shipping since the 1970's, the larger containerships have emerged and concentrated their calls at a limited number of ports. Moreover, large-scale container terminals have been built to accommodate the ever-larger containerships, and the mordernization of terminal facilities and many developments in information technology etc. have been brought out. Thus, unlimited competition has been imposed on every terminal with neighbouring ports in Japan, Singapore, Hongkong and Taiwan etc. The purpose of this study is to suggest how the container terminal operators cope with unlimited competition between local or foreign terminals. The results are suggested as follows: First, transshipment cargoes, which the added value is high, is to be induced. Second, the function of storage is given on On-Dock Yard. Third, Berth Pool Operation System is to be introduced, especially in Gamman Container Terminal and Kwangyang Container Terminal. Fourth, the cargo handling charges is to be decided by terminal operator.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.1
• /
• pp.21-27
• /
• 2013

Presented in the paper is a log data based modeling method for effective construction of a virtual plant model which can be used for the virtual PLC (Programmable Logic Controller) simulation. For the PLC simulation, the corresponding virtual plant, consisting of virtual devices, is required to interact with the input and output symbols of a PLC. In other words, the behavior of a virtual device should be the same as that of the real device. Conventionally, the DEVS (Discrete Event Systems Specifications) formalism has been used to represent the behavior a virtual device. The modeling using DEVS formalism, however, requires in-depth knowledge in the simulation area, as well as the significant amount of time and efforts. One of the key ideas of the proposed method is to generate a plant model based on the log data obtained from the production system. The proposed method is very intuitive, and it can be used to generate the full behavior model of a virtual device. The proposed approach was applied to an AGV (Automated Guided Vehicle).

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.392-395
• /
• 2003

In the maritime container terminal, LMTT (Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV (Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.