• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.8
• /
• pp.774-781
• /
• 1991

This paper proposes an auto-tuning method of a discrete -PIC controllers which is based on the Ziegler and Nichols's PID Tuning Rule. This tunign rule is derived using the Pade's first order approximation and it prevents the performance degradation caused by the time-delay effect of zero order holder when the Ziegler-Nichols tuning rule is applied to a discrete PID controller. A simple and practical auto-tuning method is proposed through combining this discrete tuning rule with the relay control. The auto-tuning scheme is implemented on a microprocessor based system and is applied to a position control system to show the effectiveness of the discrete tuning rule.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.203-206
• /
• 1998

This paper describes the procedure of getting information about auto-tuning of PID regulator by the injection of high step input, called limited input, during a transient time of control. The key point is that system identification and control could be continuously executed. This means that the system information obtained by limited input despite of system uncertainty can be continuously applied to the PI regulator. Simulation and experiment result of brushless DC motor system having monotone increasing step response demonstrate the usefulness of proposed auto-tuning algorithm.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.399-400
• /
• 2020

본 논문은 Sensored BLDC 모터의 제어방법을 설명하고, 효율적인 최적 제어를 하기위해 Lead Angle 제어를 하는 방법에 대하여 설명하였다. Lead Angle 값을 실시간 Auto Tuning 하는 기법을 설계 및 구현하였다. 실제 Microchip 사의 DSC를 사용하여 Software로 동작을 구현하였으며, PWM 스위칭 하기 위한 반도체 소자는 IGBT 모듈인 IPM을 사용하여 BLDC 모터의 구동회로인 인버터를 구성하였다. 실제 사용하는 400W급 BLDC 모터를 사용하여 Lead Angle 제어와 Auto Tuning 실험결과를 비교 검증하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.455-456
• /
• 2008

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.813-819
• /
• 2009

Designing actuator controllers of aircraft, which control aileron, flap, elevator and so on, is quiet difficult, because they have time variant nonlinear mechanical structures and also have many kinds of disturbances which are not been able to model easily. This paper reports about the performance of Fuzzy Auto gain tuning Control algorithm applied unmaned aerial vehicle. Fuzzy Auto gain tuning PID control uses PID control and Fuzzy control, therefore It can be applied very easily and it also has advances of PID control. It can control a unmaned aerial vehicle actuators adaptively even though the designer does not have enough information of plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1008-1011
• /
• 1996

Most control systems of power plants are using classical PID controllers for their process control. In order to get the desired control performances, the correct tuning of PID controllers is very important. Sometimes, it is necessary to retune PID controllers after the change of system operating condition and system design change, etc. Commercial auto-tuning controllers such as relay feedback controller can be used for this purpose. However, using these controllers to the safety-critical systems of nuclear power plants may be cause of unsafe operation, because they are using test signals for tuning. A new system identification auto-tuning method without using test signal has been developed in this paper. This method uses process input/output signals for system identification of unknown control process. From the model information of control process which was obtained from system identification approach, the optimal PID parameters can be calculated. The method can be used in the safety-critical systems because it is not using test signals during system modeling process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.510-518
• /
• 2004

The PID trajectory tracking controller for robotic systems shows performance limitation imposed by inverse dynamics according to desired trajectory. Since the equilibrium point can not be defined for the control system involving performance limitation, we define newly the quasi-equilibrium region as an alternative for equilibrium point. This analysis result of performance limitation can guide us the auto-tuning method for PID controller. Also, the quasi-equilibrium region is used as the target performance of auto-tuning PID trajectory tracking controller. The auto-tuning law is derived from the direct adaptive control scheme, based on the extended disturbance input-to-state stability and the characteristics of performance limitation. Finally, experimental results show that the target performance can be achieved by the proposed automatic tuning method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.57-62
• /
• 1998

This paper presents an auto tuning method of PID controller based on the application of fuzzy logic. The proposed method combined the principles of PID control with fuzzy control, which cam considerably improve the performance index of PID controller. Simulation results show that higher performance and accuracy of overall system for desired value is achieved with our manner when compared to widely-used conventional tuning method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.352-357
• /
• 1987

The Auto Tuning Controller is designed using Fuzzy set theory. And to verify its validity it is Applied to the Auto Tuner of hydraulic Control System. Fuzzy Tuning Procedures are written by linguistic model and translated into C language formation by preprocessor. Then it is executed with state feedback controller in real time, Fuzzy Logic Controller adjusts state feedback gain by proper tuning logic in each step to satisfy the desired maximum overshoot and settling time.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.102.5-102
• /
• 2002

In this paper auto-tuning scheme of PID controller based on the reference model has been studied by immune algorithm for a process. Up to this time, many sophisticated tuning algorithms have been tried in order to improve the PID controller performance under such difficult conditions. However, in the actual plant, they are manually tuned through a trial and error procedure, and the derivative action is switched off. Therefore, it is difficult to tune. Simulation results by immune based tuning reveal that tuning approaches suggested in this paper is an effective approach to search for optimal or near optimal process control.