• Journal of Auto-vehicle Safety Association
• /
• v.12 no.2
• /
• pp.40-46
• /
• 2020

Modern traffic accidents are a complex occurrence. Various indicators are needed to analyze traffic accidents. Countries that have been investigating traffic accidents for a long time accumulate various data to analyze traffic accidents. The Korean In-Depth Accident Study (KIDAS) database collected damaged vehicles and severity of injury caused by Collision Deformation Classification code (CDC code), Abbreviated Injury Scale (AIS), and Injury Severity Score (ISS). As a result of the investigation, data relating to the injuries of the occupants can be easily obtained, but it was difficult to analyze human severity based on the information of the damaged vehicle. This study suggests a method to measure the speed change at the time of an accident, which is one of the most important indicators in the vehicle crash database, to help advance KIDAS research.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.10 no.1
• /
• pp.19-24
• /
• 2010

The rise of music resources has led to a parallel rise in the need to manage thousands of songs on user devices. So users have a tendency to build playlist for manage songs. However the manual selection of songs for creating playlist is a troublesome work. This paper proposes an auto playlist generation system considering user context of use and preferences. This system has two separated systems; 1) the mood and emotion classification system and 2) the music recommendation system. Firstly, users need to choose just one seed song for reflecting their context of use. Then system recommends candidate song list before the current song ends in order to fill up user playlist. User also can remove unsatisfied songs from the recommended song list to adapt the user preference model on the system for the next song list. The generated playlists show well defined mood and emotion of music and provide songs that the preference of the current user is reflected.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.464-470
• /
• 2004

We propose an enhanced backpropagation algorithm by auto-tuning of learning rate using fuzzy control system for performance improvement of backpropagation algorithm. We propose two methods, which improve local minima and loaming times problem. First, if absolute value of difference between target and actual output value is smaller than $\varepsilon$ or the same, we define it as correctness. And if bigger than $\varepsilon$, we define it as incorrectness. Second, instead of choosing a fixed learning rate, the proposed method is used to dynamically adjust learning rate using fuzzy control system. The inputs of fuzzy control system are number of correctness and incorrectness, and the output is the Loaming rate. For the evaluation of performance of the proposed method, we applied the XOR problem and numeral patterns classification The experimentation results showed that the proposed method has improved the performance compared to the conventional backpropagatiot the backpropagation with momentum, and the Jacob's delta-bar-delta method.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.179-184
• /
• 2021

In our study we performed a sentiments analysis from the images. For this purpose, we used 153 images that contain: people, animals, buildings, landscapes, cakes and objects that we divided into two categories: images that suggesting a positive or a negative emotion. In order to classify the images using the two categories, we created two models. The SAI-G model was created with Google's AutoML Vision service. The SAI-C model was created on the Clarifai platform. The data were labeled in a preprocessing stage, and for the SAI-C model we created the concepts POSITIVE (POZITIV) AND NEGATIVE (NEGATIV). In order to evaluate the performances of the two models, we used a series of evaluation metrics such as: Precision, Recall, ROC (Receiver Operating Characteristic) curve, Precision-Recall curve, Confusion Matrix, Accuracy Score and Average precision. Precision and Recall for the SAI-G model is 0.875, at a confidence threshold of 0.5, while for the SAI-C model we obtained much lower scores, respectively Precision = 0.727 and Recall = 0.571 for the same confidence threshold. The results indicate a lower classification performance of the SAI-C model compared to the SAI-G model. The exception is the value of Precision for the POSITIVE concept, which is 1,000.

• Annual Conference on Human and Language Technology
• /
• 2022.10a
• /
• pp.624-629
• /
• 2022

에세이의 창의성을 자동으로 분류하는 기존의 주요 연구는 말뭉치에서 빈번하게 등장하지 않는 단어에 초점을 맞추어 기계학습을 수행한다. 그러나 이러한 연구는 에세이의 주제와 상관없이 단순히 참신한 단어가 많아 창의적으로 분류되는 문제점이 발생한다. 본 논문에서는 어텐션(Attention)과 역문서 빈도(Inverse Document Frequency; IDF)를 이용하여 에세이 내용 전달에 있어 중요하면서 참신한 단어에 높은 가중치를 두는 문맥 벡터를 구하고, 자기부호화기(AutoEncoder) 모델을 사용하여 문맥 벡터들로부터 창의적인 에세이와 창의적이지 않은 에세이의 특징 벡터를 추출한다. 그리고 시험 단계에서 새로운 에세이의 특징 벡터와 비교하여 그 에세이가 창의적인지 아닌지 분류하는 딥러닝 모델을 제안한다. 실험 결과에 따르면 제안 방안은 기존 방안에 비해 높은 정확도를 보인다. 구체적으로 제안 방안의 평균 정확도는 92%였고 기존의 주요 방안보다 9%의 정확도 향상을 보였다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.57-62
• /
• 1999

Estimation of the point spread function (PSF) is one of the main research topic of image processing, because it determines the performance of the auto-focusing system. In this paper, a new algorithm for PSF estimation is proposed, and its application to image restoration is also presented. The procedure for complete realization of the auto-focusing system consists of two steps: PSF estimation based on edge classification, and image restoration using the estimated PSF. More specifically, we divide imput image into multiple small image or block, estimate unit step response and average them on the blocks which contain edge, and estimate 2-dimensional isotropic PSF from the 1 dimensional step response. Finally we obtain in-focused image by using image restoration based on the estimated PSF.

• Food Science of Animal Resources
• /
• v.39 no.2
• /
• pp.332-344
• /
• 2019

The objective of this study was to investigate slaughtering performance, carcass grade, and quantitative traits of cuts according to seasonal influence by each month in pigs slaughtered in livestock processing complex (LPC) slaughterhouse in Korea, 2017. A total of 267,990 LYD ($Landrace{\times}Yorkshire{\times}Duroc$) pig data were used in this study. Results of slaughter heads, sex distribution, carcass weight, backfat thickness, grading class, total weight, and fat and lean meat percentages of each cut predicted by AutoFom III were obtained each month. The number of slaughtered pigs was the highest in early and late fall but the lowest in midsummer. Only in midsummer that the number of females was higher than that of castrates. During 2017, carcass weight was the lowest in late summer. Backfat thickness was in the range of 21-22 mm. In mid and late spring, pigs showed high 1+ grade ratio (37.05% and 36.15%, respectively). For traits of 11 cuts predicted by AutoFom III, porkbelly showed lower total weight, lean weight, and fat weight in midsummer to early fall but higher lean meat percentage compared to other seasons. Weights of deboned neck, loin, and lean meat were the highest in midfall compared to other seasons (p<0.05). In conclusion, characteristics of slaughtering, grading, and economic traits of pigs seemed to be highly seasonal. They were influenced by seasons. Results of this study could be used as basic data to develop seasonal specified management ways to improve pork production.

• Journal of Platform Technology
• /
• v.11 no.3
• /
• pp.45-55
• /
• 2023

This paper presents a model that supports decision-makers in the Korean film industry to maximize the success of online movies. To achieve this, we collected historical box office movies and clustered them into types to propose a model predicting each type's online box office performance. We considered various features to identify factors contributing to movie success and reduced feature dimensionality for computational efficiency. We systematically classified the movies into types and predicted each type's online box office performance while analyzing the contributing factors. We used automated machine learning (AutoML) techniques to automatically propose and select machine learning algorithms optimized for the problem, allowing for easy experimentation and selection of multiple algorithms. This approach is expected to provide a foundation for informed decision-making and contribute to better performance in the film industry.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.469-476
• /
• 2001

As the service of information through web system increases in modern society, many questions and consultations are going on through Home page and E-mail in the hospital. But there are some burdens for the management and postponements for answering the questions. In this paper, we investigate the document classification methods as a primary research of the auto-answering system. On the basis of 1200 documents which are questions of patients, 66% are used for the learning documents and 34% for test documents. All of are also used for the document classification using NBC (Naive Bayes Classifier), common words and coefficient of correlation. As the result of the experiments, the two methods proposed in this paper, that is, common words and coefficient of correlation are higher as much as 3% and 5% respectively than the basic NBC methods. This result shows that the correlation between indexes and categories is more effective than the word frequency in the document classification.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.131-138
• /
• 2022

Git's commit message is closely related to the project life cycle, and by this characteristic, it can greatly contribute to cost reduction and improvement of work efficiency by identifying risk factors and project status of project operation activities. Among these related fields, there are many studies that classify commit messages as types of software maintenance, and the maximum accuracy among the studies is 87%. In this paper, the purpose of using a solution using the commit classification model is to design and implement a complex classification model that combines several models to increase the accuracy of the previously published models and increase the reliability of the model. In this paper, a dataset was constructed by extracting automated labeling and source changes and trained using the DistillBERT model. As a result of verification, reliability was secured by obtaining an F1 score of 95%, which is 8% higher than the maximum of 87% reported in previous studies. Using the results of this study, it is expected that the reliability of the model will be increased and it will be possible to apply it to solutions such as software and project management.