• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.794-803
• /
• 2009

In this paper, we will present a container auto-landing system, the system use the stereo camera to measure the container depth information. And the container region can be detected by using its hough line feature. In the line feature detection algorithm, we will detect the parallel lines and perpendicular lines which compose the rectangle region. Among all the candidate regions, we can select the region with the same aspect-ratio to the container. The region will be the detected container region. After having the object on both left and right images, we can estimate the distance from camera to object and container dimension. Then all the detect dimension information and depth inform will be applied to reconstruct the virtual environment of crane which will be introduce in this paper. Through the simulation result, we can know that, the container detection rate achieve to 97% with simple background. And the estimation algorithm can get a more accuracy result with a far distance than the near distance.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.219-227
• /
• 1998

This paper describes the fuel spray characteristics of gasoline port injectors such as the breakup procedures of liquid fuel, breakup and extinction behaviors of fuel spray at nozzle tip, time history of SMD and velocity distribution of fuel spray in the direction of fuel stream. Pintle-type gasoline fuel injector was used to analyze mentioned spray characteristics. In order to visualize the fuel spray behaviors and to measure the droplet mean diameter and velocities of spray droplets, the Schlieren method, digital image processing and auto-correlation PIV were applied in this study. In addition, the spray characteristics according to the variation of time were considered. The results of fuel spray show that the liquid sheet breakup starts at 10mm downstream actively. The flying time is approximately 4msec between 50mm and 80mm down the nozzle tip. Also, SMD of fuel spray, the number of droplets and fuel velocity distribution at each point of downstream are discussed.

• 한국조명전기설비학회지:조명전기설비
• /
• 제13권2호
• /
• pp.195-195
• /
• 1999

This paper is Proposed a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So we can find the parameters of PID controller so as to minimize the fuzzy criterion function which includes the maximum overshoot, damping ratio, rising time and settling time. Finally, after studying the parameters of PID controller by Backpropagation of Neural-Network, when we give new K, L, T values to Neural-Network, the optimized parameter of PID controller is found by Neural-Network Program.

• 자동차안전학회지
• /
• 제6권1호
• /
• pp.41-47
• /
• 2014

A new dummy has improved biofidelity from Fair to Good compare with EuroSID2re which is currently used for regulation tests and NCAP tests. Some instrumentation of each body region has been changed to measure the assessment of injury risk. The objective of this study is to find out the injury characteristic of each dummy and to calculate the relation between external force and injury for each dummy with pendulum tests. Finally, this study suggests the optimized external force to meet consumer tests. A new dummy named WorldSID for side impact will be introduced into EuroNCAP tests after 2015. Korea government is also planning to adopt WorldSID at KNCAP tests from 2017 and Global Technical Regulation (GTR) will also adopt WorldSID to oblique side pole crash.

• 자동차안전학회지
• /
• 제16권2호
• /
• pp.60-66
• /
• 2024

Computer simulation significantly reduces the high costs associated with actual crash tests and is expanding due to its ability to analyze various test results quantitatively that are difficult to measure in real tests. Research on evaluation technologies is limited according to the finite element analysis, which aims to replace structural verification testing. In this study, considerations for virtual crash tests were derived, and the validity of the zero-energy mode (hourglass mode) was analyzed as part of the considerations for validating the results of vehicle crash simulations. The study reflects on the considerations for virtual crash tests and the variation in hourglass coefficient values affects the occurrence of the hourglass mode. As the hourglass coefficient changes, the maximum hourglass energy reaches over 5% of the maximum internal energy, necessitating a conservative review. A comprehensive study of the maximum hourglass energy is required, considering additional analysis results for various models and collision conditions.

• 생물환경조절학회지
• /
• 제23권1호
• /
• pp.26-30
• /
• 2014

본 연구에서는 과수의 형태, 거리에 따라 약대가 항상 적정 살포 거리를 유지하며 작업을 진행할 수 있도록 초음파 센서의 신호를 실시간으로 받아 약대를 제어하였고, 또한 약대의 보호를 위하여 진행 방향에 장애물이 존재할 경우 회피할 수 있도록 프로그래밍 하였다. 제작된 시스템으로 현장에서 비 자동제어 상태와 자동제어 상태로 실험을 수행하였다. 실험은 과수의 기둥과 잎 부위에 감수지를 일정간격으로 설치하고 시스템을 이용하여 분사한 후 감수지의 영상을 스캔하여 영상처리를 통해 분석하는 방법으로 이루어졌다. 상 방향 분사 실험에서는 시스템과 대상의 거리가 0.9m~1.1m로 설정해둔 적정거리를 벗어나지 않았기 때문에 비 자동제어와 자동제어 상태 모두 양호한 결과를 보였다. 하지만 측 방향 분사 실험에서는 비 자동제어 시 우측 열은 98.09%의 분사율을 보였으나 좌측 열은 69.25%로 낮게 나타났다. 이는 실험이 수행된 배 과원의 경우 과수의 좌측 열이 수평하게 식재되어 있지 않았기 때문으로 비자동제어 상태에서는 좌측열의 과수에 분사되는 양이 줄어들었으나 자동제어 상태에서는 좌, 우측열의 과수에 분사되는 양이 각각 92.66%, 94.64%로 균일하게 나타났다. 시스템의 제어 속도를 측정하기 위하여 방향 별 약대의 속도를 측정하였고 각각의 속도는 수직방향 100mm/s, 수평 방향 100mm/s, 각 변화 3o/s로 측정되었다. 초기 목적했던 바와 같이 과수의 형태, 거리에 따라 약대가 적정 거리를 유지하며 작업을 진행함으로 인해서 균일한 살포량을 유지 할 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1418-1421
• /
• 1987

An important problem in edge detection is to select a proper threshold that transforms the gradient picture to e two level picture containing optimum edges between regions, Such a threshold is determined depending on some measures of errors in tresholding. In this paper, an error criterion on extracting edges by thresholding the block gradient image is presented. Based on the error measure, the optimum threshold is chosen for the detection of acceptable edges.

• 산업공학
• /
• 제11권1호
• /
• pp.199-205
• /
• 1998

This paper describes the development of on-the-machine measuring(OMM) system which can directly measure the two and three dimensional machined accuracy using a scanning probe in milling machine. Two algorithms, NC program based continuous path(CP) measurement and CAD data assisted point to point(PTP) measurement, are developed for three dimensional measurements, with consideration of the characteristics of the scanning probe. The algorithms are used to develop an auto measuring system. The delveloped system is compared with the CMM (Coordinate Measuring Machine) in terms of accuracy and repeatability. The OMM system is expected to realize measurement time reduction and hence result in high productivity.

• 융합신호처리학회논문지
• /
• 제3권4호
• /
• pp.57-61
• /
• 2002

We design Collision Avoidance System using model vehicle. The purpose of this system(Collision Avoidance System) is to maintain continuously constant distance between a forward running vehicle and a following automatic guided vehicle(AGV). For this system, we design modeling of vehicle and observe this through simulation. By sing super sonic sensors to measure the distance between vehicles and controller using 80c196kc for changing velocity of motor, we design Collision Avoidance System as maintaining continuously constant distance between vehicles.

• 한국멀티미디어학회논문지
• /
• 제13권5호
• /
• pp.641-650
• /
• 2010

컬러 이미지 센서는 광전 변환을 일으키는 촬상 소자와 내부의 영상처리 과정을 거쳐서 컬러 이미지를 출력한다. 일반적으로 출력 영상은 원 피사체의 XYZ 3 자극치와 카메라 RGB 출력 신호 사이의 변환 관계인 카메라 전달 특성에 의해 결정된다. 본 논문에서는 컬러 이미지 센서의 내부 조정 항목인 노출-증폭-레벨(shutter-gain-level, SGL)의 특성함수와 자동 화이트 밸런스 상태를 이용한 카메라 전달 행렬을 이용하여 영상의 colorimetry(측색) 상태를 분석하는 기법을 제안한다. 제안 방법으로부터 실제 영상물의 색도와 휘도 등을 예측할 수 있다. 연구에 사용된 컬러 이미지 센서의 AE(auto exposure) 상태와 실제 휘도의 관계를 정량화하여 SGL 함수를 유도하여 영상의 휘도를 예측 한다. 그리고 영상의 색도는 최소 제곱 다항식 모델링 (polynomial modeling)을 이용하여 기준 환경에서 얻은 카메라 전달 행렬과 AWB(auto white balance) 상태를 통해 예측한다. 실험을 통해서 컬러 이미지 센서를 이용한 제안된 영상의 색도와 휘도 예측 기법의 성능이 우수함을 볼 수 있고, 예측된 결과는 실제 영상물 계측과 시청 환경 측정을 이용한 디스플레이 화질 설정 시스템, 보안 등의 다양한 분야에서 응용이 가능하다.