• 한국진공학회지
• /
• 제17권4호
• /
• pp.311-316
• /
• 2008

저에너지(수 eV) 양전자 빔을 이용하여 도체나 반도체의 표면/계면의 물리화학적 특성 분석에 독특한 유용성이 보고 되고 있다. 기존의 표면 분석법에 비해 표면의 선택도가 향상되어 반도체 소자의 박막 두께가 얇아지는 최신기술에 적합한 분석법으로 주목을 받고 있다. 물질표면에 조사된 저에너지 양전자는 표면 근처의 image potential에 포획이 되어 표면에 있는 전자들과 쌍소멸하며 Auger 전자를 방출한다. 표면으로부터 방출된 Auger 전자의 에너지를 측정함으로 원자의 화학적 구별이 가능하므로 검출기의 에너지 분해도가 중요하다. 기존의 ExB 형태의 에너지 측정기는 분해도가 $6{\sim}10\;eV$ 정도이고 특정한 에너지 영역만을 일정시간 스캔하여 스펙트럼을 측정하므로 측정시간이 길어진다는 단점이 있다. 반면에 Time-Of-Flight(TOF) 시스템은 방출되는 전자들의 에너지를 동시에 검출하므로 측정시간이 단축되어 측정 효율이 향상된다. 에너지 분해도를 높이기 위해서는 측정하고자 하는 전자의 진행거리를 길게 할수록 좋으나, 공간적 제약을 고려한 reflected TOF 시스템과 retarding tube을 이용한 linear TOF 시스템의 에너지 분해도를 이론적으로 시뮬레이션하였다.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.31-35
• /
• 2003

We present a formation technique of thin film heater for heat transfer components. Thin film structures of Cr-Si have been prepared on top of alumina substrates by magnetron sputtering. More samples of Mo thin films were prepared on silicon oxide and silicon nitride substrates by electron beam evaporation technology. The electrical properties of the thin film structures were measured up to the temperature of $500^{\circ}C$. The thickness of the thin films was ranged to about 1 um, and a post annealing up to $900^{\circ}C$ was carried out to achieve more reliable film structures. In measurements of temperature coefficient of resistance (TCR), chrome-rich films show the metallic properties; whereas silicon-rich films do the semiconductor properties. Optimal composition between Cr and Si was obtained as 1 : 2, and there is 20% change or less of surface resistance from room temperature to $500^{\circ}C$. Scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) were used for the material analysis of the thin films.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.260-266
• /
• 2002

In this study, the effects of oxide layer farmed on the wear tracks of TiN coated silicon wafer on friction and wear characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with 1 ${\mu}{\textrm}{m}$ in coating thickness. AISI 52100 steel ball was used fur the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction and wear characteristics using X-ray diffraction(XRD), Auger electron spectroscopy(AES), scanning electron microscopy (SEM) and multi-mode atomic force microscope(AFM).

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.310-316
• /
• 2002

In this study, the effects of oxide layer formed on the wear tracks of TiN coated silicon wafer on friction and wear characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with $1{\mu}m$ in coating thickness. AISI 52100 steel ball was used for the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction and wear characteristics using X-ray diffraction (XRD). Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and sliding tests.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제8회 학술발표회 논문개요집
• /
• pp.116-116
• /
• 1995

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1992년도 제3회 학술발표회 논문개요집
• /
• pp.101-102
• /
• 1992

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.66-71
• /
• 1998

Plasma polymerized hexamethyldisiloxane (PPHMDSO) thin films were produced using an electrode capacitively coupled apparatus. Fourier transform infrared spectroscopy analysis indicated that the thin film spectra are composed not only of the corresponding monomer bands but also of several new bands. Auger electron spectroscopy analysis indicated that the permeation depth of aluminum into the films is ca. 30nm when top electrode is deposited by evaporation aluminum. The increase of relative dielectric constant and decrease of dielectric loss tangent with the discharge power is originated from high cross-link of the films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제22회 학술발표회 초록집
• /
• pp.64-64
• /
• 2002

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.15-18
• /
• 1996

The elemental segregation in the sputter-deposited AgInSbTe recording thin films was studied by means of Auger electron spectroscopy and ESCA for the specimens of as-deposited and as heat-treated conditions. Auger electron spectroscopy and ESCA revealed an extremely thin layer of elemental inhomogeneity, especially for the silver, even in as-deposited condition. The chemical analysis results obtained in this alloy system are discussed in terms of process parameters and target microstructure.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.875-882
• /
• 1992

Titanium carbide(TiC) films, known as having excellent characteristics of resistance to wear and corrosion, were deposited on SUS-304 sheets using HCD(Hollow Cathode Discharge) reactive ion plating with acetylene gas as the reactant gas. The characteristics of TiC films were examined by X-ray diffraction, micro-Vickers hardness tester, ${\alpha}$-step, SEM(Scanning Electron Spectroscopy), ESCA(Electron Spectroscopy for Chemical Analysis), and AES(Auger Electron Spectroscopy) and the results were discussed with regard to the changes of various deposition conditions(bias voltage, acetylene flow rate, temperature).