• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.156-160
• /
• 1999

This experiment was carried out to investigate the auditory threshold of the scorpion fish Sebastiscus marmoratus which was suitable for Marine ranching by a classical respiatory conditioning technique using a sound coupled with a delayed electric shock. The thresholds were determined by analyzing the electrocardiogram. The auditory thresholds were observed among the 12 fish with much difference from 100Hz to 300Hz. The audible range of the scorpion fish extended from 80 to 800Hz with a peak sensitivity of 90㏈(0㏈= $1\mu$Pa) at 100Hz. As the frequency became higher than 300Hz, the auditory threshold increased rapidly. The scorpion fish was least sensitive to sound of 500Hz among 6 frequency points and the value was about 12㏈.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.191-197
• /
• 2017

According to the ubiquitous usage of smartphone, so many smartphone applications have been developed, and especially data communications and position measurement technologies without additional equipments have been developed using acoustic signal. But there is a limitation to select the frequency of the acoustic signal due to the smartphone hardware, and there is non-linearity in the electronic circuits in a sound generation devices, the audible sound generated from the speaker is not avoidable. And it causes critical difficulty to the commercial system deployment. In this paper, a simulation technique to calculate the power of the audible acoustic signal by human is applied to several types of acoustic signals to evaluate the loudness. These could be referred when the acoustic communications or positioning systems are designed, for the purposed of inaudible sounding to human.

• Speech Sciences
• /
• v.8 no.1
• /
• pp.33-52
• /
• 2001

A bilingual sound dictionary in Korean and English has been created for a broad range of sound reference to cross-linguistic, dialectal, native language (L1)-transferred biological and allophonic variations. The paper demonstrates that the pronunciation dictionary of the lexicon is inadequate for sound reference due to the preponderance of unmarked sounds. The audio registry consists of the three-way comparison of 1) English speech from native English speakers, 2) Korean speech from Korean speakers, and 3) English speech from Korean speakers. Several sub-dictionaries have been created as the foundation research for independent development. They are 1) a pronunciation dictionary of the Korean lexicon in a keyboard-compatible phonetic transcription, 2) a sound dictionary of L1-interfered language, and 3) an audible dictionary of Korean sounds. The dictionary was designed to facilitate the exchange of the speech signal and its corresponding text data on various media particularly on CD-ROM. The methodology and findings of the construction are discussed.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.253-256
• /
• 2000

This paper describes a DSP implementation of a real-time 3D sound localization algorithm with the use of a low power embedded DSP. A distinctive feature of this implementation is that the audible frequency band is divided into three, in accordance with the sound reflection and diffraction phenomena through different media from a certain sound source to human ears, and then in each subband a specific implementation procedure of the 3D sound localization is devised so as to operate real-time at a low frequency of 50MHz on a 16bit fixed-point DSP. Thus out DSP implementation can provide a listener with 3D sound effects through a headphone at low cost and low power consumption.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.264-267
• /
• 2000

This paper describes a real-time 3D sound localization algorithm to be implemented with the use of a Bow power embedded DSP. This algorithm first divides the audible frequency band into three, on the basis of the analysis of the sound reflection and diffraction effects through different media from a certain sound source to human ears, and then in each subband a specific procedure is devised fur the 3D sound localization so as to operate real-time on a low power embedded DSP This algorithm aims at providing a listener with the 3D sound effects through a headphone at low cost and low power consumption.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.93-98
• /
• 1996

This paper presents active silencer by hysteresis control method using DSP-scheme and shows it audible noise reduction effect. Pentium processor and sound blaster 16 are used for its implementation. The sound blaster 16 executes A/D, D/A conversion and is used operating source of loudspeaker for cancelling.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.552-553
• /
• 2010

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.202-204
• /
• 1995

An acoustic sensor using PVDF film is proposed in this paper. And its properties, such as sensitivity level, identification of sound source frequencies. and directivity, were experimented. Sensitivity level measured at the distance of 1[m] was limited in the range of ${\pm}$10dB. Adjacent three frequencies were also tested to identify the frequency of sound sources. In the range of audible frequencies, it could distinguish the frequencies of a complex sound. In addition, it was found that the sensor outputs were maximum in the coincided direction with a source, when directivity was experimented with three sound sources and FFT. The proposed PVDF film sensor has good characteristics of directivity and identifying ability as an acoustic sensor.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.181-191
• /
• 1991

The present study determined the overall noise level and the distribution of sound pressure level over audible frequency range of noise produced at various work sites. Work-related noise greater than 80dBA produced from 98 separate work sites at 37 manufacturing companies and machine shops were analysed for the overall sound level (dBA) and frequency distribution. In addition, to determine the possible hearing loss related to work site noise, a hearing test was also conducted on 1,374 workers in these work sites. The results of the study were as follows ; 1. Of the total 98 work sites, 57 work sites(58.2%) produced noise exceeding threshold limit value (${\geq}90dBA$) set by the Ministry 01 Labor. In terms of different manufacturing industries the proportion of work sites which exceeded 90dBA was the highest for the cut-stone products industry with 6/6 work sites and lowest for the commercial printing industry with 1/13 work sites. 2. The percentage of workers who were exposed to noise greater than 90dBA was 19.8% (1,040 workers) 01 the total 5,261 workers. In terms of different industries, cut-stone products industry had the most workers exposed to noise exceeding 90dBA with 82.8%, textile bleaching and dyeing industry was next at 30.6% followed by fabricated metal products industry with 27.9%, plastic products manufacturing industry had the lowest percentage of workers exposed to 90dBA exceeding noise with 4.5%. 3. There was a statistically significant correlation between the frequency of noise-induced hearing loss and the percentage of workers exposed to noise exceeding 90dBA (P<0.05). 4. The frequency analysis of noise produced at the 98 work sites revealed that 44 work sites (44.9%) had the maximum sound pressure level at high-frequencies greater than 2KHz. In addition, significantly higher sound pressure level was detected at the high-frequencies at 90dBA exceeding work sites as compared to below 90dBA work sites (P<0.01). 5. The differences in sound level meter's A-and C-weighted sound pressure levels were analysed by frequencies. Of the 28 work sites which showed 0-1 dB difference in the two weighted sound levels, 20 work sites (71.4%) had significantly higher sound pressure levels at high-frequencies greater than 2KHz (P<0.01). Furthermore, there was a tendency for higher sound pressure levels to occur in the high-frequency range as the differences in the two weighted sound levels decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.131-137
• /
• 2009

Recent technological advances made a vehicle more intelligent to increase safety and comfort. An intelligent vehicle provides drivers with safety warning information through audible sounds, visual displays, and tactile devices. However, elderly drivers have been known to decrease the physical and cognitive abilities such as muscular strength, hearing, eyesight, short term memory, and spatial perception. Therefore, possible age-related deficits should be considered to design an effective warning system. This paper aims to evaluate the impact of advancing age on response performance on audible safety warnings which are widely used for alerting driving hazards. In order to understand the effect of age-related hearing loss and movement slowing, three sound characteristics (frequency, intensity, and period) and three age groups (younger, middle, and older) are considered. Data was drawn from 38 drivers who drove a simulated rural road in a driving simulator. Experimental results show that age influences driver's response performance. In conclusion, the appropriate range of a warning sound is suggested.