• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 동계학술연구발표회 및 스핀트로닉스와 나노물리에관한 국제심포지움
• /
• pp.68-69
• /
• 2007

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2015년도 자성 및 자성재료 국제학술대회
• /
• pp.20-20
• /
• 2015

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제29회 학술발표회 초록집
• /
• pp.48-48
• /
• 2005

• 마이크로전자및패키징학회지
• /
• 제6권3호
• /
• pp.9-18
• /
• 1999

본 연구에서는 융점 이상에서의 유지시간에 따른 Sn-3.5Ag 및 Sn-37Pb 공정솔더볼과 Au/Ni/Cu 기판 사이의 야금학적 특성을 고찰하였다. 현재 상용되는 리플로 솔더링 장비를 사용하여, 최고 솔더링 온도와 Conveyor 속도를 변화시킴으로써 융점이상에서의 유지시간을 측정하였다. 결과로서 접합부 계면에서 스캘럽 형태의 $Ni_3Sn_4$금속간화합물이 형성되었고, Cu-Sn계 화합물은 관찰되지 않았다. Ni층이 Cu의 확산 장벽으로 작용하였다. 최고 솔더링 온도가 증가함에 따라 금속간화합물 층의 두께가 최고 2.2$\mu\textrm{m}$까지 성장하였다. 스캘럽의 형상은 반구형에서 지름이 더 작은 볼록한 형상으로 변하게 된다. 접합부의 미세경도값은 Sn-3.5Ag와 Sn-37Pb의 공정조직이 성장함에 따라 감소하였다.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.39-43
• /
• 2011

마이크로파 유전체의 Q 값 측정에 널리 사용되고 있는 유전체 공진기 방법에서 캐비티의 재질변화가 유전체의 Q 값 측정에 미치는 오차요인에 대해 HFSS 시뮬레이션과 실측평가를 병행하여 조사하였다. HFSS의 전자계 벡터 형상으로부터 $TE_{01\delta}$ 모드의 공진주파수를 결정하고 $S_{21}$ 파라메터의 3dB 대역폭으로부터 Q 값을 계산하였다. 캐비티 금속이 Cu, SUS, Au 등으로 변화할 경우 유전체 공진기의 Q 값 측정에 큰 오차는 발생하지 않았으나, 금속이 산화하여 전도도가 수 천 정도로 떨어질 경우 Q 값이 매우 낮게 측정되는 오차가 발생함을 확인하였다. 이러한 시뮬레이션 결과는 실제로 다양한 재질의 금속 캐비티를 가지고 유전체 공진기의 Q 값을 측정해 본 결과 서로 일치되는 관련성을 나타내었다.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.18-22
• /
• 2007

For interlayer tunneling spectroscopy using a small stack of $Bi_2Sr_2CaCu_2O_{8+x}$ (Bi-2212) intrinsic junctions in a high-bias range, large self-heating takes place due to the poor thermal conductivity of Bi-2212. In this study, we numerically estimate the self-heating around a Bi-2212 sample stack for I-V or dI/dV-V measurements. Our results show that the temperature discrepancy between the Bi-2212 sample stack and top Au electrodes due to bias-induced self-heating is small enough along the c-axis direction of Bi-2212. On the other hand, the lateral temperature discrepancy between the sample stack and the Bi-2212 on-chip thermometer stack can be as large as ${\sim}20\;K$ for the highest bias required to observe the pseudogap hump structure. We thus suggest a new in-situ ac thermometry, employing the Au current-bias electrode itself deposited on top of the sample stack as the resistive thermometer layer, which is supposed to allow safe temperature measurements for the interlayer tunneling spectroscopy.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.141-144
• /
• 2000

We report on the influence of d-wave pairing symmetry in high-T$_c$ superconductor by tunneling spectroscopy. The zerobias conductance peak(ZBCP) which is produced by tunneling through the ab-plane is observed on both of metal Au/YBa$_2$Cu$_3$O$_y$(N/S) tunnel junctions and ferromagnet Co/Au/ YBa$_2$Cu$_3$O$_y$(F/N/S) tunnel junctions. The effects of Andreev reflection on the differential conductance of each junctions are dependent on the tunnel direction. For the S/N/F junction, it appears the suppression of the ZBCP due to the suppression of Andreev reflection at the interface between a ferromagnetic material and a d-wave superconductor. By comparing these experimental results with recent theoretical works on Andreev reflection, the existence of Andreev bound state is verified in high-T$_c$ superconductor, due to the d-wave symmetry of the pair potential.

• 대한치과보철학회지
• /
• 제32권3호
• /
• pp.378-395
• /
• 1994

The purpose of this study was to investigate the effect of various metal surface treatments and adhesive systems on the flexural bond strength of composite resin to Au-Ag-Cu-Pd alloy. The specimens were divided into nine groups by the combinations of surface treatment methods and adhesive systems. The types of surface treatment in this study were alumina blasting only, alumina blasting-Sn plating, alumina blasting-heating and three kinds of adhesive system used in this study were Silicoater system(Heraeus Kulzer GmbH,Germany), Superbond C & B(Sun Medical Co.,Ltd.,Japan) and Cesead opaque primer(Kurary Co.,Ltd.,Japan). After surface treatments and adhesive systems were applied, each specimen was built up with Dentacolor composite resin (Heraeus Kulzer GmbH,Germany). Four-point flexural bond strength was measured by Instron universal testing machine (Model 4301,U.S.A.) and modes of failure were observed by SEM(JEOL,SSM-840A,Japan). The obtained results were as follows: 1. The group that was bonded with Superbond C & B after alumina blasting-heating shelved the highest bond strength with significant difference among the groups, except the group with Cesead opaque primer after alumina blasting-Sn plating(P<0.05). 2. In the groups bonded with Cesead opaque primer, there was significant difference only in the bond strength between the alumina blasting-Sn plating group and alumina blasting group, where the former showed a higher bond strength(P<0.05). 3. In the groups bonded with Silicoater system, there were no significant differences in bond strength regardless of the surface treatment method(P<0.05). 4. In SEM evaluation, the groups of high bond strength, especially bonded with Superbond C & B after alumina blasting-heating and Cesead opaque primer after alumina blasting-Sn plating, revealed mainly cohesive-adhesive failure, whereas the others showed the tendency of adhesive failure.

• 자원환경지질
• /
• 제32권1호
• /
• pp.73-82
• /
• 1999

The objectives of this study are to investigate soil contamination in the vicinity of abandoned Au-Ag mine and to apply a remediation technique of liming to tailings. In the study area of the Imcheon Au-Ag mine, soils were sampled in and around the mine the analyzed by Atomic Absorption Spectrometry extracted by both 0.1N HCl and aqua regia. Elevated levels of Cd, Cu, Pb and Zn concentrations extracted by 0.1N HCl were found in soils taken from tailings site. These high contents directly influenced metal concentrations in soils taken in the vicinity of the site. This is mainly due to clastic movement by wind and effluent of mine waste water. In addition, relatively enriched concentrations of the metals were found in soils extrated by aqua regia due to strong decomposition of the samples compared with 0.1N HCl extration. According to the statistical approach, metal concentrations in soils by 0.1N HCl had a positive correlation with those by aqua regia extraction. Mine waste waters and stream waters were also sampled around the mine in spring and summer and analyzed by AAS for Cd, Cu, Pb and Zn, and by Ion Chromatography for anions. Like soils developed over tailings, significant levels of metals and sulphates were found in the mine waste waters ranging of 0.2~0.3, 0.5~2.0, 0.2~2.8, 30~50 and 1,240~4,700 mg/l of Cd, Cu, Pb, Zn and $SO_4^{2-}$, respectively. These elevated levels influenced in the stream waters in the vicinity of the tailings site. In seasonal variation of metal and anion contents, relatively high levels were found in waters sampled on summer due to leaching the metals and anions from tailings by rain. This study also examined the possibility of lime treatment for remediation of acid mine tailings and assumed to be 46 tones of pulverized lime for neutralization of the tailings.

• 자원환경지질
• /
• 제37권3호
• /
• pp.277-290
• /
• 2004

인도네시아 자바 땅긍지역의 석영맥에 대한 정밀광상조사를 실시하여 그 연장부에 대한 트렌치 탐사를 수행하였다. 트렌치탐사와 주변 정밀광상조사에서 채취된 석영맥의 금ㆍ은 분석 등의 결과는 (1) Celak지역 :Au 21∼17,400ppb, Ag 2∼190 ppm, Cu 9∼3,340 ppm, Pb 60∼52,900 ppm, Zn 12∼13,950 ppm, (2) Cilangkap지역 : Au 24∼91,100 ppb, Ag 2∼41ppm, Cu 2∼l,600ppm, Pb 16∼2,960ppm, Zn 14∼1,520ppm이다. 또한 정밀지표지질조사를 실시하였으며, 석영맥에 대한 정밀광상조사를 실시하여 그 연장부에 대한 트렌치 탐사를 수행한 결과와 인공위성과 수치지형도해석 등의 모든 결과를 종합한 결과 금번 조사 지역 중 두 곳인 Mt. Subang 지역의 서남부에 위치하는 Celak 지역과 Mt. Cilankap 지역의 서남부에 해당하는 Cilangkap 지역에서 금광화작용이 있는 것으로 확인되었으며, 이 들 두지역의 금 품위가 아주 높게 나타나 이들 두 지역을 시추유망지역으로 선정하였다.