• 한국식품저장유통학회지
• /
• 제8권4호
• /
• pp.434-441
• /
• 2001

본 연구에 세는 제빵용 소맥분의 손상전분 함량을 비교 분석하여 최적의 작업조건 설정과 제빵 품질을 향상시킬 목적으로 손상전분 함량을 각각 달리하여 반죽의 물리적 특성 및 제빵 적성을 검토하였다. DNS와 CWRS 및 SW 등의 소맥을 제분하여 손상전분 함량 6.5%, 8.2%, 9.0%, 9.5% 및 10.5%를 함유한 시료로 제조한 반죽의 물리적 및 이화학적 특성인 farinogram, extensogram, amylogram 등을 조사하였으며, 또한 제빵 적성 실험으로 rheometer를 이용하여 제빵의 경도 및 비용적과 관능검사 등으로 품질을 평가하였다. 제빵 적성 실험에서 손상전분 6.5%, 10.5%에서는 효소활성이 강하여 반죽이 연약해져 선택, 모양이 나쁘게 나타났으며, amylogram특성 실험 결과 최고 점도가 900 B.U인 손상전분 9.5%에서 빵의 부피, fermentation tolerance가 증가하였다. extensogram에서 신장 저항성(R)값이 45분, 90분, 135분으로 시간이 갈수록 R값이 현저하게 증가하는 손상전분 함량 9.0%와 9.5%함유된 밀가루의 반죽 공정이 쉽고 장시간 발효에 잘 견디며 좋은 조직의 빵이 생산되었으며, 종합적인 관능 평가에서도 조직이 부드럽고 기공이 균일하며 씹힘성, 부피감 및 향 등이 가장좋은 제빵으로 나타났다.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.53-59
• /
• 2014

The corrosion resistance of submerged entry nozzle (SEN) materials were investigated for high-class steel manufacturing. Composite samples were fabricated by mixing $ZrO_2$, $Al_2O_3$, MgO, mullite, spinel, and carbon. The raw materials were mixed with attrition milling, compacted in a uniaxial pressure of 200MPa and calcined at $1000^{\circ}C$ for 3 h in $N_2$ atmosphere. The bulk density and apparent porosity of the calcined samples were measured by the liquid displacement method in water using Archimedes's principle. The corrosion resistance of the samples were measured by cup test with mold powder at $1550^{\circ}C$ for 2 h. The microstructure and elemental analysis of samples were observed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction pattern (XRD). The XRD result shows that the starting raw materials were crystalline phase. The microstructure of fabricated specimen was investigated before and after corrosion tests at $1000^{\circ}C$ and $1550^{\circ}C$ for 2h. $ZrO_2$-C composite showed good resistance in the slag corrosion test. Among the composite oxide materials, $ZrO_2-Al_2O_3$-C and $ZrO_2$-MgO-C showed better resistance than $ZrO_2$-C in the slag corrosion test. The diameter variation index of $ZrO_2$-C refractory was 16.1 at $1000^{\circ}C$ for 2 h. The diameter variation index of the $ZrO_2-Al_2O_3$-C refractory was larger than that of the $ZrO_2$-C refractory at $1550^{\circ}C$ for 2 h.

• 한국분말재료학회지
• /
• 제14권4호
• /
• pp.230-237
• /
• 2007

The fabrication of Fe alloy-40 wt.%TiC composite materials using spark plasma sintering process after ball-milling was studied. Raw powders to fabricate Fe alloy-TiC composite were Fe alloy, $TiH_{2}$ and activated carbon. Fe alloy powder was Distaloy AE (4%Ni-1%Cu-0.5%Mo-0.01%C-bal.%Fe) made by Hoeganes company with better toughness and lower melting point. These powders were ball-milled in horizontal attrition ball mill at a ball-to-powder weight ratio of 30 : 1. After that, these mixture powders were sintered by using spark plasma sintering apparatus for 5 min at $1200-1275^{\circ}C$ in vacuum atmosphere under $10^{-3}$ torr. DistaloyAE-40 wt.%TiC composite was directly synthesized by dehydrogenation and carburization reaction during sintering process. The phase transformation of as-milled powders and sintered materials was confirmed using X-ray diffraction (XRD) and transmission electron microscope (TEM). The density and harness materials was measured in order to confirm the densification behavior. In case of DistaloyAE-40 wt.%TiC composite retained for 5 min at $1275^{\circ}C$, it has the relative density of about 96% through the influence of rapid densification and fine TiC particle reinforced Fe-based composites materials.

• 한국결정성장학회지
• /
• 제29권3호
• /
• pp.115-122
• /
• 2019

제강분진(Electric arc furnace dust)은 제강공정에서 발생하는 분진폐기물로서 중금속을 다량 포함하고 있어 관리가 매우 중요하다. 제강분진은 아연, 철 등의 유가금속을 다량 함유하고 있기 때문에 최근 이를 재활용하는 연구가 활발하게 진행 중이며, 본 연구에서는 전처리 과정 없이 제강분진을 청색 계열의 세라믹 안료의 코발트를 대체할 수 있는 원료로 사용하였다. 또한 합성된 청색 세라믹 안료를 잉크젯 프린팅용 세라믹 잉크로 개발하기 위해 미립화 과정에서의 입도 분포, 결정 구조 및 발색 특성 변화에 대해 고찰하였다. 제강분진이 첨가된 $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ 세라믹 안료는 우수한 청색 발색 특성을 보이며, 어트리션 밀링(Attrition Milling)을 이용한 미립화 공정을 통하여 단정(monomodal) 분포의 입도를 확보할 수 있었다. 3시간 밀링 후 $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ 세라믹 안료의 평균 입도는 $0.271{\mu}m$로 제강분진이 첨가되지 않은 $CoAl_2O_4$ 세라믹 안료의 5시간 밀링 후의 평균 입도인 $0.303{\mu}m$보다 더욱 작은 것을 확인하였다. 특히, $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ 세라믹 안료는 미립화 공정 중 발색 변화(${\Delta}E{^*}_{ab}$) 값이 5.67로 $CoAl_2O_4$ 보다 작아서 더 우수한 발색 특성을 보이는 것으로 확인되었다. 이러한 결과는 분진폐기물인 제강분진을 어떠한 전처리 과정 없이 고가의 코발트를 대체하여 청색 계열의 세라믹 안료의 원료로 사용할 수 있다는 것을 보여주고 있다.

• Nuclear Engineering and Technology
• /
• 제28권5호
• /
• pp.458-466
• /
• 1996

The effects of dopants on the modification of microstructure of UO$_2$ and UO$_2$-4wt%CeO$_2$ sintered pellets have been studied in hydrogen and $CO_2$/CO mixture atmospheres by using $Ta_2O_5$, TiO$_2$ and $Nb_2O_5$ as sintering additives. The dopant were added as oxide powders and homogenized by attrition milling. The mixed powders were pressed, and then sintered in hydrogen at 1$700^{\circ}C$ , or in oxidizing atmosphere using Controlled $CO_2$/CO mixtures at 125$0^{\circ}C$. Both density and microstructure of UO$_2$ are modified by the addition of dopants in reducing atmosphere. The sintered density is increased with $Ta_2O_5$ addition up to 0.33wt% and subsequently decreased with higher content of the additive. The effect on the densification and the gain growth are apparent with the addition of 0.24wt% $Nb_2O_5$. With 0.lwt% titania and 0.6wt% $Ta_2O_5$, the sintered density is decreased, but the grain size is increased. In oxidizing atmosphere, the grain sizes for UO$_2$ doped with the above additives are smaller than that for pure UO$_2$. The grain size of Ta or Nb-doped UO$_2$ is decreased with increasing $CO_2$/CO ratio, but that of pure UO$_2$or T-doped UO$_2$ is increased. A large portion of second phases is observed in UO$_2$ doped with 0.lwt% TiO$_2$ sintered in hydrogen atmosphere, while, in $CO_2$/CO atmospheres, the second phases or dopant agglomerates are not observed. For UO$_2$-4wt%CeO$_2$ mixed oxide, the effect of additives on the gain growth is not so much as that for the pure UO$_2$. This is attributed to the formation of clusters by dopant cations and Ce ions, so that the additives contribute to a lesser exent to the grain growth for the mixed oxide.