• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.47-52
• /
• 2016

This paper presents a control method for the performance improvement of a proportional solenoid actuator using a Pulse Width Modulation (PWM) signal. It is very difficult to obtain excellent response performance from a proportional solenoid actuator using a simple proportional controller with no PWM signal or dither because the mass and structure of a proportional solenoid actuator changes according to the application target, friction force in the proportional solenoid tube, operating force and displacement range. To solve the above problems, first, a controller with a PWM function for experimenting with attraction force characteristics was designed and manufactured. Secondly, an experimental setup for solenoid performance measurement with a force sensor and a displacement sensor was also manufactured. The attraction force characteristics according to the frequency and duty ratio variations of a PWM signal were tested and the relationships among the frequency, duty ratio, plunger mass and friction characteristics were analyzed. Finally, response characteristics improvements for proportional solenoid actuators are discussed.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.34-44
• /
• 1996

N-machine produces more than input energy at above 3000 rpm. any space energy is absorbed when the N-machine is rotating at a very high velocity. Laws of electromagnetics verify that normal conduction is due to that electrons moves from one three-dimensional crystallizing ${\pi}-bonding$ orbital to next. The ${\pi}-far$ infrared rays are generated from the resonance and rotation of the electrons on the orbitals of three-dimensional crystallizing ${\pi}-bonding$ atoms. Material in universe is composed of ${\pi}-rays$, which have alternative outward electric field. If the alternative outward electric fields of the ${\pi}-rays$ are resonant each other they make attraction force, which is the gravity. The collection of space energy is due to a attraction force between the radially alternating electric field and the ${\pi}-far$ infrared rays in the space. Electrons flow by absorbed density difference of ${\pi}-far$ infrared rays along a conduction wire, which also verifies that normal electron conduction is due to a flow from one three-dimensional crystallizing ${\pi}-bonding$ orbital to next.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1218-1223
• /
• 2009

LIM(Linear induction motor)s are the main type of motors used for urban Maglev vehicles because they are less expensive to operate at a lower speed than linear synchronous motors. An LIM generates an attraction force while running, which perturbs the air gap of the electromagnet. This undesirable air gap variation could result in the mechanical contact of an electromagnet with the reaction plate. For this reason, the magnitude of the air gap variation must be limited within a certain range. The air gap changes when running the 1/2 vehicle under development for testing are analyzed through a test on the test track at KIMM. The results from this study could be used to minimize the air gap variations due to attraction force from LIM.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.192-192
• /
• 2003

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.385-389
• /
• 2010

This paper presents a microfabricated nanowire diluter which dilutes the concentration of nanowires in solution instead of by the conventional centrifuge process. The device has 16 pairs of gold electrodes in a micro channel composed of a glass substrate and PDMS. We prepared nickel nanowires by the template-directed electrodeposition method using nanoporous anodized aluminum template (AAO). We injected the Dimethylformamide (DMF) solution containing nanowires into the inlet of the diluter while applying square wave voltages on the electrodes to trap the nanowires at the subsequent gold electrodes by means of dielectrophoretic attraction forces. The concentration of nanowires at the outlet of the micro channel was changed as we expected, which illustrates that the device can effectively dilute nanowires and can be applied to a controlled assembly of nanowires.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.997-1000
• /
• 1993

This paper proposes the linear induction motor with salient poles, transverse flux and the secondary aluminum conductor for a new type urban MAGLEV. Compared with the more usual kind of linear induction motor with longitudinal flux, TFLIM have flux paths tying transversely to the direction of motion. This shortens the magnetic circuit and produces the thrust, the attraction force and the lateral stabilization force simultaneously. Owing to these electrodynamic force, TFLIM will be usable to a new type urban MGLEV.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2018

FCV is installed with a automatic valve attached in an high pressure cylinder to control the hydrogen flow. The supply of hydrogen from the cylinder into the fuel cell stack is controlled via the on/off operation of a solenoid attached to the automatic valve. The solenoid needs to provide the necessary attraction force even at any saturation temperature caused by drive of the vehicle. In this study, the simplified prediction equations for the saturation temperature are suggested. The finite element analysis was performed by steady state technique, according to the boundary condition in order to predict the saturation temperature and attraction force. Finally, the saturation temperature was validated through comparison between the analysis results and measurement results. From the results, the measured saturation temperature $5.9^{\circ}C$ lower with respect to the analysis results. And the error of attraction force ranged from 1.0 to 2.1 N at testing conditions.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.264-268
• /
• 2005

Most of the train brakes depends on friction between wheels and tracks. This requires braking force reduced in order not to cause wheel slides since the friction decreases as the train speed increases and consequently results in extension of braking distance. The braking system called 'Linear eddy current brake' or simply' Eddy current brake' is a braking system for making a brake independent from friction, which consists in creating electromagnet by coiling around shoes attached. to bogies; having the shoes above the tracks approached to the tracks upon acknowledgement of a braking command; and authorizing braking force that is irrelevant to friction through magnetic repulsion between electromagnet attached to the tracks and train set by the use of the electromagnet's magnet field characteristics. An electromagnetic attraction braking system that consists in pressing pole shoes attached to bogies against the tracks by using electromagnet's attraction force is called 'Electromagnetic track brake' or simply 'Track brake'. This paper has been prepared in purpose of studying technological tendencies of the eddy current brake and the track brake so that it can be utilized as fundamental data for commissioning Korean high-speed trains with the eddy current brake hereafter.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.11-15
• /
• 2013

These days, the quality of goods is required to improve in the process of manufacturing the semiconductor through the short working hours and clean transportation. The non-contact transport device using magnetic levitation can be a solution in the manufacturing process. The non-contact transport device, using electromagnetic actuation, is the system that can actually transport them by only using attraction force from the electromagnetic source without authentic contact. Moreover, the system using electromagnetic force has a substantial number of benefits ranging from unrestricted design to unlimited expansion. Especially, the price is competitive. The non-contact transport device, using electromagnetic force, has another merits in controlling by giving the same amount of attraction force to ferromagnetic body. By controlling the currents given to coil, the operator is able to decide the direction of the transportation. In order to design the optimal system, we implemented five different things such as the presence of the links below the electromagnetic, the electromagnet changes due to coupling method, the change according to the thickness of the links below electromagnet, due to changes in between electromagnetic distance direction, and the size of the current. Through simulations and the optimum design, it seems to control easily and figure out the exact size of power. It might definitely be the non-contact transport that can sharply reduce tiny scratches and particles in the process of manufacturing the semiconductor.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.127-130
• /
• 1991

A magnetic levitation system with hybrid magnets, which is composed of permanent magnets and electromagnets, consumes less power than the conventional attraction type system. A parallel complementary controller on the lift controller is proposed to reduce the sensitivity for parameter variation and force disturbance. Simulation and experiment show that the lift system has robustness to force disturbance.