• 한국진공학회지
• /
• 제8권2호
• /
• pp.102-110
• /
• 1999

The LIGA X-ray exposure step was modelled into three inequalities, by assuming that the X-ray energy attenuated within a resist is deposited only in the localized range of the resist. From these inequalities, equations for the minimum and maximum exposure times required for a good quality microstructure were obtained. Also, an equation for the thickness of an X-ray mask absorber was obtained from the exposure requirement of threshold dose deposition. The calculation method of the synchrotron radiation power from a synchrotron radiation source was introduced and applied to an X-ray exposure step. A power from a synchrotron radiation source was introduced and applied to an X-ray exposure step/ A power function of photon energy, approximating the attenuation length of the representative LIGA resist, PMMA, and the mean photon energy of the XZ-rays incident upon an X-ray mask absorber were applied to the above mentioned equations. Consequently, the tendencies of the minimum and maximum exposure and with respect to mean photon energy and thick ness of PMMA was obtained. Additionally, the tendencies of the necessary thickness of PMMA and photon energy of the X-ray mask absorber with respect to thickness of PMMA and photon energy of the X-rays incident upon an X-ray mask absorber were examined. The minimum exposure time increases monotonically with increasing mean photon energy for the same total power density and is not a function of the thickness of resist. The minimum exposure time increases with increasing mean photon energy for the same total power density in the case of the general LIGA process, where the thickness of PMMA is thinner than the attenuation length of PMMA. Additionally, the minimum exposure time increases monotonically with increasing thickness of PMMA. The maximally exposable thickness of resist is proportional to the attenuation length of the resist at the mean photon energy with its proportional constant of ln $(Dd_m/D_{dv})$. The necessary thickness of a gold X-ray mask absorber due to absorption edges of gold, increases smoothly with increasing PMMA thickness ratio, and is independent of the total power density itself. The simplicity of the derived equations has made clearly understandable the X-ray exposure phenomenon and the correlation among the exposure times, the attenuation coefficient and the thickness of an X-ray mask absorber, the attenuation coefficient and the thickness of the resist, and the synchrotron radiation power density.

• Korean Journal of Radiology
• /
• 제20권4호
• /
• pp.683-692
• /
• 2019

Objective: We aimed to evaluate correlations between computed tomography (CT) parameters and pulmonary function test (PFT) parameters according to disease severity in patients with chronic obstructive pulmonary disease (COPD), and to determine whether CT parameters can be used to predict PFT indices. Materials and Methods: A total of 370 patients with COPD were grouped based on disease severity according to the Global Initiative for Chronic Obstructive Lung Disease (GOLD) I-IV criteria. Emphysema index (EI), air-trapping index, and airway parameters such as the square root of wall area of a hypothetical airway with an internal perimeter of 10 mm (Pi10) were measured using automatic segmentation software. Clinical characteristics including PFT results and quantitative CT parameters according to GOLD criteria were compared using ANOVA. The correlations between CT parameters and PFT indices, including the ratio of forced expiratory volume in one second to forced vital capacity (FEV1/FVC) and FEV₁, were assessed. To evaluate whether CT parameters can be used to predict PFT indices, multiple linear regression analyses were performed for all patients, Group 1 (GOLD I and II), and Group 2 (GOLD III and IV). Results: Pulmonary function deteriorated with increase in disease severity according to the GOLD criteria (p < 0.001). Parenchymal attenuation parameters were significantly worse in patients with higher GOLD stages (P < 0.001), and Pi10 was highest for patients with GOLD III (4.41 ± 0.94 mm). Airway parameters were nonlinearly correlated with PFT results, and Pi10 demonstrated mild correlation with FEV1/FVC in patients with GOLD II and III (r = 0.16, p = 0.06 and r = 0.21, p = 0.04, respectively). Parenchymal attenuation parameters, airway parameters, EI, and Pi10 were identified as predictors of FEV₁/FVC for the entire study sample and for Group 1 (R² = 0.38 and 0.22, respectively; p < 0.001). However, only parenchymal attenuation parameter, EI, was identified as a predictor of FEV₁/FVC for Group 2 (R² = 0.37, p < 0.001). Similar results were obtained for FEV₁. Conclusion: Airway and parenchymal attenuation parameters are independent predictors of pulmonary function in patients with mild COPD, whereas parenchymal attenuation parameters are dominant independent predictors of pulmonary function in patients with severe COPD.

• 핵의학기술
• /
• 제18권1호
• /
• pp.49-61
• /
• 2014

인구의 고령화와 함께 골다공증성 척추압박골절 환자의 발병률은 매년 증가하는 추세이며 경피적 척추성형(percutaneous vertebroplasty, PVP)은 가장 많이 시행되는 표준화된 치료 방법이다. 시술 전 후의 정확한 진단평가에 있어 SPECT/CT 검사의 유용성이 우수하다는 연구 보고가 있으나 시술에 사용되는 골 시멘트(bone cement) 물질은 CT 영상에서 인공물(artifact)을 생성하여 영상품질에 영향을 미친다. 이에 본 연구에서는 골 시멘트가 SPECT/CT 영상에 미치는 영향을 평가하는 데 목적을 두었다. NEMA-1994 팬텀(phantom)에 배후방사능(3.6 kBq/ml), 열소(29.6 kBq/ml), 냉소(물)를 설정한 후 각 원통(cylinder)에 모형 시멘트를 삽입하여 영상 획득하였다. Astonish (Iterative: 4, Subset: 16)으로 재구성하였고, CT 보정 방법은 비감쇠보정(NAC), 감쇠보정(AC+SC-), 감쇠 및 산란보정(AC+SC+) 3가지 방법을 사용하였다. 각각의 보정방법에 따른 평균계수와 시멘트물질의 유 무에 따른 계수 변화율을 비교하고 대조도 회복 계수(contrast recovery coefficient, CRC)를 구했다. 또한, 압박골절 진단을 받은 환자 107명 중 PVP를 시행한 20명을 선별하여 추체를 골절, 정상, 시멘트로 나누고 연조직(척추기립근)을 포함 4곳의 평균 계수를 측정한 후, 뼈/연조직 간 계수 비(bone/soft tissue ratio, B/S ratio)을 구했다. NAC를 기준으로 AC+SC-, AC+SC+의 평균계수는 증가하였고, AC+SC-의 평균계수가 가장 높았으며, AC+SC+는 AC+SC-에 비해 상대적으로 낮았다. 시멘트 물질의 유 무에 따른 평균계수는 시멘트가 존재할 때 NAC, AC+SC-, AC+SC+에 따라 팬텀의 열소에서 12.4%, 6.5%, 1.5%, 냉소 75.2%, 85.4%, 102.9%, 배후방사능 13.6%, 18.2%, 9.1%, 임상영상의 골절부에서 33.1%, 41.4%, 63.5%, 정상부 53.1%, 61.6%, 67.7%, 연조직 10.0%, 4.7%, 3.6%의 증가율을 보였다. 반면 원통 내부의 시멘트 인접부에서 상대적 계수감소를 확인할 수 있었고, 병소에 대한 팬텀영상과 임상영상간의 계수 증가율은 상반된 양상을 보였다. 대조도 비를 나타내는 CRC와 B/S ratio는 NAC, AC+SC-, AC+SC+순으로 향상되었고, 팬텀의 냉소에서는 큰 변화 없이 일정하였다. 정량적 계수는 AC+SC-가, 대조도 비는 AC+SC+가 가장 높게 분석되었다. PVP 시행 환자의 척추 뼈 SPECT/CT 검사에서 AC+SC- 의 사용은 영상계수를 대폭 향상시켜 특히 병소의 농도가 높은 영상을 얻는 반면에 골 시멘트의 영향과 함께, 연부조직 및 산란영역의 영상잡음 계수까지 증가시키므로 대조도비를 향상시키는 AC+SC+의 적용을 병행한다면 임상진단에 유용할 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.490-495
• /
• 2003

The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores for the blocking filter of Power Line Communication(PLC) application were investigated as a function of additives. The highest density and permeability were 4.98 g/$\textrm{cm}^2$ and 8,221, respectively and were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$ mol%, added MoO$_3$ of 400 ppm, SiO$_2$ of 100 ppm, and CaO of 200 ppm. The uniform grains were organized, and the microstructures were densified due to reduction of pores in the specimen. The permeability was increased up to 13,904 as the temperature of specimen increased to 110$^{\circ}C$. However, it was decreased precipitously under 100 over 110$^{\circ}C$. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz, and the maximum temperature of specimen was 102$^{\circ}C$ at 1 MHz. In the consequence, the Mn-Zn ferrite core developed in this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93$^{\circ}C$ in the range of 100 kHz to 450 kHz bandwidth qualified for PLC. The blocking filters were designed for single phase and three phases using the in-line and non-contact core. The best attenuation ratios of -46.46 dB and -73.9 dB were measured in the range of 100 kHz to 450 kHz bandwidth, respectively.

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.501-510
• /
• 2000

초음파 에코파형의 시간-주파수해석법으로 Wigner 분포와 웨이브렛 변환 등과 같은 새로운 신호처리 기법이 비파괴평가 분야에 널리 응용되고 있다. 본 연구에서는 웨이브렛 변환(wavelet transform)에 의한 음속과 감쇠계수의 주파수의존성과 초음파 결함신호의 잡음제거의 유용성 유무를 실험적으로 검증하였다. Gabor 함수를 웨이브렛의 기본함수로 사용하였다. 초음파의 에코파형에 포함된 각 주파수성분의 속도와 감쇠계수의 주파수의존성을 추정할 수 있었으며, 초음파탐상에서 결함의 검출능 향상과 결함크기 산정의 정량화에 접근하기 위해 웨이브렛 변환에 의한 S/N비 신호처리 시뮬레이션 결과를 오스테나이트강 스테인레스 용접부에 가공한 EDM 노치의 초음파 결함신호에 적용한 결과 임상에코를 저감하고 S/N비를 개선하는 것이 가능하였다.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.113-120
• /
• 2019

To investigate surface properties and interception performances of the new modified PVDF membrane coated with Graphene Oxide (GO) and nano-$TiO_2$ (for short the modified membrane) via the interface polymerization method combined with the pumping suction filtration way, filtration experiments of the modified membrane on Humic Acid (HA) were conducted. Results showed that the contact angle (characterizing the hydrophilicity) of the modified membrane decreased from $80.6{\pm}1.8^{\circ}$ to $38.6{\pm}1.2^{\circ}$. The F element of PVDF membrane surface decreased from 60.91% to 17.79% after covered with GO and $TiO_2$. O/C element mass ratio has a fivefold increase, the percentage of O element on the modified membrane surface increased from 3.83 wt% to 20.87%. The modified membrane surface was packed with hydrophilic polar groups (like -COOH, -OH, C-O, C=O, N-H) and a functional hydrophilic GO-polyamide-$TiO_2$ composite configuration. This configuration provided a rigid network structure for the firm attachment of GO and $TiO_2$ on the surface of the membrane and for a higher flux as well. The total flux attenuation rate of the modified membrane decreased to 35.6% while 51.2% for the original one. The irreversible attenuation rate has dropped 71%. The static interception amount of HA on the modified membrane was $158.6mg/m^2$, a half of that of the original one ($295.0mg/m^2$). The flux recovery rate was increased by 50%. The interception rate of the modified membrane on HA increased by 12% approximately and its filtration cycle was 2-3 times of that of the original membrane.

• 대한조선학회논문집
• /
• 제59권2호
• /
• pp.64-71
• /
• 2022

In this paper, we simulate the collision of a solitary wave on a vertical wall in a uniform water channel and investigate the effect of damping on the amplitude attenuation. In order to take into account the damping effect, we introduce the Stokes damping whose dissipation is dependent on the velocity of wave motion on the surface of a thin layer of oil. That is, we use the improved Boussinesq equation with Stokes damping to describe the damped wave motion. Our work mainly focuses on the amplitude attenuation of a propagating solitary wave, which may depend on the Stokes damping together with the initial position and initial amplitude of the wave. We utilize the method of images and a powerful numerical tool (functional iteration method) for solving the improved Boussinesq equation, yielding an effective numerical simulation. This enables us to find the amplitudes of the incident wave and reflected one, whose ratio is a measure of the (wave) amplitude attenuation. Accordingly, we have shown that the reflection of a solitary wave by a vertical wall is dependent on not only the initial amplitude and position of a solitary but the Stokes damping.

• Korean Journal of Radiology
• /
• 제21권6호
• /
• pp.756-763
• /
• 2020

Objective: To evaluate the effects of attenuation threshold on CT pulmonary vascular volume ratios in children and young adults with congenital heart disease, and to suggest an optimal attenuation threshold. Materials and Methods: CT percentages of right pulmonary vascular volume were compared and correlated with percentages calculated from nuclear medicine right lung perfusion in 52 patients with congenital heart disease. The selected patients had undergone electrocardiography-synchronized cardiothoracic CT and lung perfusion scintigraphy within a 1-year interval, but not interim surgical or transcatheter intervention. The percentages of CT right pulmonary vascular volumes were calculated with fixed (80-600 Hounsfield units [HU]) and adaptive thresholds (average pulmonary artery enhancement [PA_avg] divided by 2.50, 2.00, 1.75, 1.63, 1.50, and 1.25). The optimal threshold exhibited the smallest mean difference, the lowest p-value in statistically significant paired comparisons, and the highest Pearson correlation coefficient. Results: The PA_avg value was 529.5 ± 164.8 HU (range, 250.1-956.6 HU). Results showed that fixed thresholds in the range of 320-400 HU, and adaptive thresholds of PA_avg/1.75-1.50 were optimal for quantifying CT pulmonary vascular volume ratios. The optimal thresholds demonstrated a small mean difference of ≤ 5%, no significant difference (> 0.2 for fixed thresholds, and > 0.5 for adaptive thresholds), and a high correlation coefficient (0.93 for fixed thresholds, and 0.91 for adaptive thresholds). Conclusion: The optimal fixed and adaptive thresholds for quantifying CT pulmonary vascular volume ratios appeared equally useful. However, when considering a wide range of PAavg, application of optimal adaptive thresholds may be more suitable than fixed thresholds in actual clinical practice.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.591-594
• /
• 2002

This paper presents a systematic method of probing channel characteristics and communication reliabilities of home power line communication network applied to the Internet accessed control of home appliances. The effects of the three performance deteriorating factors, i.e., additive noise, channel attenuation, and intersymbol interference, can be systematically measured by applying the channel probing waveform in the frequency range from 100㎑ to 450㎑. Probability of bit error is derived with the probed channel parameters of the signal attenuation, noise and signal-to-interference ratio read in the frequency domain. The agreement between the derived probability of bit ewer and the measured probability of bit error support the validity of the proposed approach of probing home power line channel characteristics. The experimental results performed with the constructed test-bed applying the Proposed channel probing method and the operation reliability measurement of the overall networked system also support the feasibility of commercially deploying the PLC modem installed home appliances and their services for the Internet accessed home automation in densely populated residential apartment complexes.

• 한국의학물리학회지:의학물리
• /
• 제18권3호
• /
• pp.172-178
• /
• 2007

가로축 방식이 아닌 세로축 방식으로 초음파를 송수신하여 골밀도 측정을 하는 장치를 개발하였다. 반사된 초음파의 시간 차이를 이용하는 speed of sound (SOS) 방식은 주파수 차이를 비교하는 broadband ultrasound attenuation (BUA) 방식에 비하여 더욱 정확한 결과를 얻을 수 있다. 측정부위의 경우 엄지는 초음파 수신율이 좋으나 피부 두께의 변위가 많은 단점을 고려하여 중지를 채택하여 정확성을 높였다. SOS 방식만을 사용하여 측정한 결과 기존의 dual-energy x-ray absorptiometry (DEXA) 방식과 비교하여 거의 동일한 정확도를 얻을 수 있었다.