• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.342-350
• /
• 2000

In this paper, the bit error performance for the reverse link of a synchronous direct sequence code division multiple access (DS-CDMA) system employing an imperfect power control scheme over a frequency selective Rayleigh fading channel is analyzed. The system capacity degradation due to power control error (PCE), which is approximated by a log-normally distributed random variable, is estimate as a function of a standard deviation of the PCE. In addition, the impact of the multipath intensity profile (MIP) shape and the number of resolvable paths on the performance of the synchronous transmission is investigated. To estimate the system capacity, the coded bit error performance is evaluated and compared with the conventional CDMA. It is found tat synchronous transmission has less sensitivity to imperfect power control and eases the power control requirements. In particular, as the decay constant $\delta$ of MIP increases, the synchronous transmission in the DS-CDMA reverse link results in a significant BER improvement over the asynchronous transmission even in the presence of imperfect power control. We further conclude that the capacity can be improved by employing the synchronous transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.277-287
• /
• 1992

In this paper, we study the performance eualuations of the FDDI Network, by mathmeticlal analysis and simulation, in which the Integrated Voice/Data transmission system with voice traffic in synchronous mode and data traffic inasynchronous mode.For the mean waiting times of Voice/Data packet, we use two-state of Marcov models for voice traffic with talkspurt and silenci state, and the data traffic would traffic would transmit at the silence state of voice traffic. By the mean wating times, we analyze the relations between synchronous and asynchronous mode. As a result, using Sync/Async mode with voice and data, voice was not under influnece of data traffic. and in the same time,data can be tanaxmitted in a short waiting time, too.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.511-520
• /
• 1989

Generally, Intelliget link is made of drawing picture that is amalgated in two conception of communication and processing. This is a new system of information transmission having fuction being able to handle een though the former information transmission can not be possible. That Intelligent link is to say that function of each segment by working software can be anailable at general purposed pipeline processing system, general purpose pipeline have a different working time in function of segmant, work asynchronizing pipeline. in the papers, graphic design is easy to understand the sense of sight model by Petri Net that is simple regulation. it can translate into working of asynchronzing pipeline by working of calculator of simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.876-884
• /
• 2008

In this paper, we propose an asynchronous MAC protocol to minimize energy usage and to maximize data throughput for a wireless sensor network in multi channel environments. Our proposed SPMC-MAC (Slim Preamble Multi-Channel Media Access Control) adopts the preamble sliming mechanism proposed in [6] that takes advantage of the knowledge about the wakeup time of the receiver node. The preamble contains the receiver's ID and a randomly selected channel ID for data communication, and it is transmitted over a dedicated common channel. The power control has the benefit of keeping an appropriate number of nodes with the communication range, resulting in reduced collision and interference. We compare our SPMC-MAC and X-MAC extensively in terms of energy consumption and throughput using mathematical analysis and simulation.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.691-696
• /
• 2005

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very-large-scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a $5{\times}5$ matrix of data cells in a Virtex-E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.3
• /
• pp.44-49
• /
• 2001

In general. requirements for QoS are different according to the type of services in wireline and wireless ATM, and real-time video service is more sensitive to cell transmission delay than to cell loss. Existing handoff schemes emphasizing prevention of cell loss had limitations in cell transmission delay to satisfy QoS. In this paper, a novel scheme to transmit ATM cells with low CLP (when CLP = 0) prior to others and discarding cells with high CLP (when CLP = 1) in ATM cell header among cells to be forwarded during handoffs in real-time VBR service is proposed. The proposed scheme is proven to be suitable for the satisfaction of QoS and appropriate for fast handoffs by giving high CLP value to less meaningful MPEG frames through simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.34-44
• /
• 2003

As the recent rapid development of internet technology and the wide spread of multimedia communications, massive increase of network traffic causes some problems such as the lack of network paths and the bad quality of service To resolve these problems, this paper presents a web-based traffic control system which supports QoS of realtime packet transmission for the multimedia communication The traffic control system presented in this paper applies the integrated service model and provides QoS of packet transmission by means of determining the packet transmission rate according to the policies of network manager and the optimal resource allocation considering the end-to-end traffic load It also provides QoS for the realtime packet transmission through the admission controller and the packet scheduler by the modified $WF^2Q^+$ algorithm support asynchronous and class-based queuing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12B
• /
• pp.1042-1051
• /
• 2004

The IEEE1394 is a favorable protocol for A/V networks recently in home and there are two types of transmission in this protocol which are asynchronous and isochronous. The more nodes participate in the IEEE1394 network, the more problems of resource exhaustion and connection repetition may occur. So this paper proposes a middleware for isochronous connection management and reliable multimedia data transmission in the IEEE1394-IEC61883 based home networks. In this paper, proposed middleware is supporting the various types of isochronous connection, guaranteeing the reliability of isochronous connection and providing the characteristic of a real-time data transmission. We support CORBA API for multimedia service and the proposed architecture was implemented using a test-bed and we verified the proposed architecture in a test-bed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1531-1539
• /
• 2017

The existing SSD storage tester processed logs in a 1-N structure between server and client using TCP and network file system. This method causes some problems for example, an increase in CPU usage and difficulty in exception handling, etc. In this paper, we implement a log processing message layer that can deal with asynchronous distributed processing using open source messaging system such as kafka, RabbitMQ and compare this layer with existing log transmission method. A log simulator was implemented to compare the transmission bandwidth and CPU usage. Test results show that the transmission using the message layer has higher performance than the transmission using the message layer, and the CPU usage does not show any significant difference The message layer can be implemented more easily than the conventional method and the efficiency is higher than that of the conventional method.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.275-278
• /
• 2000

Recently ATM(Asynchronous Transfer Mode) technology is facing challenges from Integrated Service IP(Internet Protocol), IP router, Gigabit Ethernet. Although ATM is approved by ITU-T as the standard technology in B-ISDN, its survival is still in question. In the ATM networks, the Guaranteed Frame Rate(GFR) service has been designed to accommodate non-real-time applications, such as TCP(Transmission Control Protocol)/IP based traffic. The GFR service not only guarantees a minimum throughput at the frame level, but also supports a fairshare of available resources. We have studied different discarding and scheduling schemes, and compared their throughput and fairness when TCP/IP Traffic is carried. Through simulations, we know that only per-VC queueing with weighted Round Robin(WRR) can guarantee Minimum Cell Rate Among all the Schemes that have been experimented, we recommend DT-EPD(Dynamic Threshold-Early Packet Discard) integrated with MCRplus(Minimum Cell Rate) to support the GFR service.