• The Journal of Korean Physical Therapy
• /
• v.27 no.4
• /
• pp.228-233
• /
• 2015

Purpose: Gait is the most basic element when evaluating the quality of life with activities of daily living under ordinary life circumstances. Symmetrical use of the lower extremities requires complicated coordination of all limbs. Thus, this study examined asymmetry of muscle activity quadriceps femoris and tibialis anterior as a baseline for training during over-ground walking and stair walking of stroke patients. Methods: Subjects were 14 stroke patients included as one experimental group. Gait speed used in this study was determined by the subject. Low extremity paretic and non-paretic EMG was compared using the surface EMG system. Results: The low extremity EMG difference was statistically significant during over-ground walking and stair walking (p<0.05). The result of low extremity EMG substituted symmetry ratio formula was compared to EMG symmetry ratio in both legs during over-ground walking and stair walking. The average symmetry ratio of quadriceps femoris during over-ground walking was 0.65, and average symmetry ratio of quadriceps femoris during stair walking was 0.47, with significant difference (p<0.05). Conclusion: EMG data was higher in stair walking than over-ground walking. However, in the comparison of symmetry ratio, asymmetric EMG of quadriceps femoris was significantly increased during stair walking. These findings suggested that application of stair walking for strengthening of both legs can be positive, but the key factor is maintaining asymmetrical posture of both legs. Therefore, physical therapists should make an effort to reduce asymmetry of quadriceps femoris power during stair walking by stroke patients.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.550-555
• /
• 2007

The aim of this study was to determine the effect of two lighting programs (continuous lighting (CL) 24L:0D and intermittent lighting (IL) 1L:3D) on the broiler performance, carcass traits, incidence of tibial dyschondroplasia (TD), relative asymmetry (RA), duration of induced tonic immobility (TI), heterophils-lymphocytes ratio (H/L), serum glucose, cholesterol and triglyceride levels. The chicks were randomly divided into 2 treatment groups consisting of 100 chicks per treatment, continuous lighting (CL) 24L:0D or intermittent lighting (IL) 1L:3D. Each treatment consists of 5 replicates of 20 chicks. The experimental period was 6 weeks. Use of IL decreased feed to gain ratio, improved immune response and reduced fearful. Body weight, carcass traits, TD and stress parameters (organ weights, RA, H/L, glucose, cholesterol and triglyceride levels) were not significant in different lighting groups. As a result IL was beneficial for producers and chickens than CL.

• Journal of International Academy of Physical Therapy Research
• /
• v.2 no.2
• /
• pp.294-300
• /
• 2011

The purpose of this study was to investigate the influence of the static pelvic inclination and declination in the static standing position on weight bearing rate and gait elements. Fourteen healthy adults in their twenties were participated. Two groups of healthy adults were allocated in this study: above and below the average of pelvic tilt. The correlation between the pelvic inclination, weight bearing rate and gait elements were measured. There was a statistical correlation between the pelvic tilt and step. Also, there was a statistical difference when we compared anterior declination with swing period and posterior declination with step. There was an asymmetric correlation between pelvic tilt and step. However, there was no statistical difference between the groups above and below the average of pelvic tilt. This result indicates that dipper pelvic inclination doesn't affect the asymmetry of step.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.429-431
• /
• 2009

Drawability and other mechanical properties of sheet metals are strongly dependent on their crystallographic orientations. In this paper the formability of the AA 5052 Al alloy sheets was investigated after asymmetric rolling and subsequent heat treatment. In most cases, after asymmetric rolling specimens showed a fine grain size and subsequent heat treated specimens showed that the ND // <111> texture component were observed. The anisotropy of formability is often described by the plastic strain ratios (r-value) as a function of the angle to the rolling direction in sheet metal. For a good formability, a high r-value is required in sheet metals. In the asymmetry rolled and subsequent heat treated Al alloy sheet, the variation of the plastic strain ratios have been investigated in this study, The plastic strain ratios of the asymmetry rolled and subsequent heat treated AA 5052 Al alloy sheets were higher than those of the original Al sheets. These could be related to the formation of ND // <111> texture components through asymmetric rolling in Al sheet.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1291-1293
• /
• 2005

Switched reluctance motors have the advantage a high torque/weight ratio, as the large reluctance torque is made by salient poles of both stator and rotor, and a high reliability. On the other hand, the switched reluctance motors have the disadvantage of a large ripple torque which is made by salient poles. So the application for the industrial fields have been limited to special cases. This paper describes the design of a 12/8 switched reluctance motor using a enemy layer method of the asymmetry rotor. The design is focussed to reduce the torque ripple and radial force in the demanded value. The three dimension finite element analysis method(3D-FEM) was used for decides a enemy layer angle of the asymmetry rotor. This paper presents modifications of the rotor pole shape which reduces the torque ripple.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.477-479
• /
• 2008

Drawability and other mechanical properties of sheet metals are strongly dependent on their crystallographic orientations. In this paper the formability of the AA 5052 Al alloy sheets was investigated after asymmetric rolling and subsequent heat treatment. In most cases, after asymmetric rolling specimens showed a fine grain size and subsequent heat treated specimens showed that the ND//<111> texture component were observed. The anisotropy of formability is often described by the plastic strain ratios (r-value) as a function of the angle to the rolling direction in sheet metal. For a good formability, a high r-value is required in sheet metals. In the asymmetry rolled and subsequent heat treated Al alloy sheet, the variation of the plastic strain ratios have been investigated in this study. The plastic strain ratios of the asymmetry rolled and subsequent heat treated AA 5052 Al alloy sheets were higher than those of the original Al sheets. These could be related to the formation of ND//<111> texture components through asymmetric rolling in Al sheet.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.87-97
• /
• 2011

Objective: Facial asymmetry is usually evaluated from the difference in length and angulation of the maxilla and mandible. However, asymmetric position or shape of the condyle can also affect the expression of asymmetry. The purpose of this study was to evaluate the correlation between condylar asymmetry and chin point deviation in facial asymmetry. Methods: Cone-beam CT images of fifty adult skeletal Class III patients were studied. Thirty patients who had more than 4 mm menton deviation were categorized in the asymmetric group. Twenty patients with less than 4 mm menton deviation were assigned to the symmetric group. Anteroposterior and transverse condyle positions were evaluated from the cranial base. The greatest mediolateral diameter (GMD) of the condyle in the axial plane and angulation to the coronal plane were measured. The height and volume of the condyles were evaluated. Results: The symmetric group had no statistical difference between both condyles in position, angulation, GMD, height and volume. In the asymmetric group, the non-deviated side condyle was larger in GMD, height and volume than the deviated side. There was no statistical difference in condyle position and angulation. The GMD, height difference and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. From the linear regression analysis, condylar volume ratio was a significant factor affecting chin deviation. Conclusions: These findings suggests that the non-deviated side condyle is larger than the deviated side. In addition, condylar asymmetry can affect the expression of facial asymmetry.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.302-312
• /
• 2020

This study examined whether there is a difference in cost asymmetry between a corporate listed on KOSDAQ and a corporate listed on KOSPI, and whether there is a difference in cost asymmetry depending on the size of the listed corporate. In the previous study, cost asymmetry was examined only for listed corporate, but the difference in size between KOSDAQ-listed corporate and KOSPI-listed corporate was not examined. However, according to many studies, since the characteristics of corporate and firm risks are different between corporate listed on KOSPI and corporate listed on KOSDAQ, or even for listed corporate, such an impact may affect the decision-making of internal resource allocation. The analysis was conducted that there would be a difference in the impact. For this study, the results of analyzing the KOSPI and KOSDAQ markets from 2011 to 2019 using the cost behavior model of Anderson et al. (2003), There was a difference in cost behavior in the KOSPI and KOSDAQ markets. Overall, as in previous studies, Cost Stickiness was appeared. but in the case of the KOSPI market, Cost Stickiness was mitigated.It was found that corporate with large corporate size made the decision to dispose of idle resources more clearly when sales decreased. In addition, it was observed that the higher the foreign investor's ownership ratio, the KOSPI market, and the larger the corporate size, the more clearly the Stickiness of cost was mitigated. This study expands research on cost asymmetry and reveals that there is a difference between the KOSPI market and the KOSDAQ market, and between the size of the corporate, and has a differentiation from previous studies.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.425-426
• /
• 2007

The physical and mechanical properties of the sheets metals are closely related to the presence of preferred crystallographic orientations which were produced by the manufacturing process. To obtain the aluminum alloys sheets with good Al sheet formability, the plastic strain ratio (or r-value) of AA1050 Al sheets after asymmetric rolling and subsequent heat treatment was studied. The AA1050 aluminum alloy sheets after asymmetric rolling with high reduction ratio and following heat treatment had the higher plastic strain ratio.

• The Korean Journal of Financial Management
• /
• v.22 no.1
• /
• pp.1-36
• /
• 2005

In this study, we analyzed determinant factors of leverage ratio and debt maturity for Korean firms in the simultaneous equation system using 2SLS (two stage least square) method under assumption that two variables are jointly determined in the capital structure decision. As a result of the analysis, we found that leverage ratio and debt maturity are positively related. Also, as for determinant factors of debt maturity, agency cost hypothesis, asset maturity matching hypothesis, signalling and liquidity risk hypothesis are all generally supported, and further leverage ratio are significantly positively related with firm size, but negatively related with default risk. However, when we divided samples into groups according to bank debt level and Chaebul affiliation, with contrast to existing study which worked on similar issues with OLS, we found no evidence supporting the argument that the information asymmetry problem is less severe in firms with more bank debt, whereas information asymmetry and financial constraint problems are more severe in non-Chaebul affiliated firms.