• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.7
• /
• pp.346-352
• /
• 2006

In Brushless DC Motor, there are Permanent Magnets (PMs) with driving circuit and sensor for detecting to rotor position and rotation speed. In the case of using hall IC sensor which response to magnetic flux, that is required to additional sensor magnet for rotor position detecting. Most of BLDC motor, However, take asymmetrical overhang of PM in rotor instead of additional sensor magnet for operating of hall IC sensor. The asymmetrical overhang of PM occur rotor thrust to z-axis direction that is lead to not only damage of bearing but also intensive noise and vibration. Therefore, the analysis of magnet overhang effect in the side of vibration and drive to hall If sensor is required to precise. In this paper, 2-D Finite Element Method is used to solve precise field computation and thrust of z-axis direction considering asymmetrical magnet overhang. And also the z-axis thrust from the analysis result is compared to experimental result. In conclusion, the purpose of this paper minimize to noise and vibration of BLDC Motor as analyzes to asymmetrical magnet overhang effect.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.109-111
• /
• 2006

This paper deals with a noise and vibration of brushless dc (BLDC) motors due to the asymmetrical overhang of permanent magnet. The asymmetrical overhang of permanent magnet is generating z-axis thrust which is lead to eccentric force and vibration of BLDC motor. The z-axis thrust considering asymmetrical overhang effect of permanent magnet is analyzed by using 3-D FEM and the result is compared to experimentation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.11
• /
• pp.564-571
• /
• 2006

In this paper, the estimation of Z-axis thrust ripple and vibration of BLDC motor with asymmetrical permanent magnet overhang is performed by 3-D Finite Element Method (3-D FEM) and vibration experimentation. The ripple of Z-axis thrust is due to armature reaction field in BLDC motor driven to squire wave. That is generating to Z-axis vibration. The analysis results of Z-axis thrust and the vibration by Z-axis thrust ripple is validated by comparison with experimental result.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.77-79
• /
• 2006

본 논문에서는 Brushless DC Motors(이하 BLDC Motor이라 함)의 비대칭 영구자석 오버행 구조에 의한 Z축 방향 추력, 진동 특성을 연구하였다 무부하인 경우에는 Z축방향 추력이 일정하므로 베어링에 하중으로만 작용하여 진동은 발생하지 않는다. 그러나 코일전류가 증가할수록 코일전류에 의한 증자, 감자작용으로 인하여 자속에 리플이 발생하며 Z축 방향 추력도 리플은 물론 진동이 발생한다. 따라서, 븐 연구에서는 전기자 전류 변화에 따른 자속밀도 및 Z축 방향 추력 특성을 해석하였으며 이를 실험치와 비교하였다.