• Journal of Magnetics
• /
• 제18권2호
• /
• pp.117-124
• /
• 2013

Single-phase, brushless DC (BLDC) motors have unequal air-gaps to eliminate the dead-point where the developed torque is zero. Unfortunately, these unequal air-gaps can deteriorate the motor characteristics in the cogging torque. This paper proposes a novel design for a single-phase BLDC motor with an asymmetric notch to solve this problem. In the design method, the asymmetric notches were placed on the stator pole face, which affects the change in permanent magnet shape or the residual flux density of the permanent magnet. Parametric analysis was performed to determine the optimal size and position of the asymmetric notch to reduce the cogging torque. Finite element analysis (FEA) was used to calculate the cogging torque. A more than 28% lower cogging torque compared to the initial model with no notch was achieved.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.387-393
• /
• 2015

Torque ripple is necessarily generated in interior permanent magnet synchronous motors (IPMSMs) due to the non-sinusoidal distribution of flux density in the air gap and the magnetic reluctance by stator slots. This paper deals with an asymmetric rotor shape to reduce torque ripple which can make sinusoidal flux density distribution in the air gap. Meanwhile the average torque is relatively increased by the asymmetric rotor. Response surface method (RSM) is applied to find the optimum position of the permanent magnets for the IMPSM with improved torque performance. Consequently, an asymmetric structure is the result of RSM and the structure has disadvantage of a mechanical stiffness. Finally, the performance of suggested shape is verified by finite element analysis and structural analysis is conducted for the mechanical stiffness.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1080-1084
• /
• 1994

Asymmetric inducing effects of substituents attached at nitrogen, the 5-position and boron in oxazaborolidine rings on asymmetric borane reduction of ketones were investigated. Thus, the effect of N-substituents examined with the oxazaborolidines prepared from (lR,2S)-N-alkyl norephedrine derivatives showed the remarkable decrease of enantioselectivities of the product alcohols by the variation of the steric size of alkyl groups on nitrogen from Me${\leftrightarro}$n-Bu(${\simeq}$Bn)${\leftrightarro}$ neopentyl${\leftrightarro}$i-Pr, such as 83${\%}$ ee with 5b, 22${\%}$ ee with 5c, 23${\%}$ ee with 5f, 16${\%}$ ee with 5e, and 3${\%}$ ee with 5d for the reduction of acetophenone. The presence of diphenyl groups at the 5-position enhanced the enantioselectivities dramatically. The effect of B-alkyl substituents in the oxazaborolidines derived from (lR,2S)-ephedrine showed that the enantioselectivities of product alcohols decreased gradually when the substituents were changed from hydrogen to steric bulky groups such as methyl, n-butyl, thexyl and phenyl.

• 대한치과의사협회지
• /
• 제51권6호
• /
• pp.302-312
• /
• 2013

It has been established that disk displacement of the temporomandibular joint(TMJ) can cause mandibular asymmetry in growing subjects. One of the causes of internal derangement of TMJ seems to be the result of poor positioning of the joint structure in unilateral cross bite, and the subsequent occlusal trauma transferred to the functioning unit of the mandible, the joint and disc. Transverse discrepancy of the maxillary and the mandibular posterior dentoalveolar units was often found in mandibular asymmetric subjects. Most of the asymmetry in growing subjects becomes worse with further growth if left untreated. However once sufficient posterior overjet is gained through orthodontic treatment, many cases have shown improvement in facial asymmetry. Furthermore, the position of condyles in computed tomogram(con-beam CT) changed from anatomically unfavorable position to more concentric position.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권1호
• /
• pp.11-16
• /
• 2014

Objectives: The aim of this study was to evaluate the pattern of lingual split line when performing a bilateral sagittal split osteotomy (BSSO) for asymmetric prognathism. This was accomplished with the use of cone-beam computed tomography (CBCT) and three-dimensional (3D) software program. Materials and Methods: The study group was comprised of 40 patients (20 males and 20 females) with asymmetric prognathism, who underwent BSSO (80 splits; n=80) from January 2012 through June 2013. We observed the pattern of lingual split line using CBCT data and image analysis program. The deviated side was compared to the contralateral side in each patient. To analyze the contributing factors to the split pattern, we observed the position of the lateral cortical bone cut end and measured the thickness of the ramus that surrounds the mandibular lingula. Results: The lingual split patterns were classified into five types. The true "Hunsuck" line was 60.00% (n=48), and the bad split was 7.50% (n=6). Ramal thickness surrounding the lingual was $5.55{\pm}1.07$ mm (deviated) and $5.66{\pm}1.34$ mm (contralateral) (P =0.409). The position of the lateral cortical bone cut end was classified into three types: A, lingual; B, inferior; C, buccal. Type A comprised 66.25% (n=53), Type B comprised 22.50% (n=18), and Type C comprised 11.25% (n=9). Conclusion: In asymmetric prognathism patients, there were no differences in the ramal thickness between the deviated side and the contralateral side. Furthermore, no differences were found in the lingual split pattern. The lingual split pattern correlated with the position of the lateral cortical bone cut end. In addition, the 3D-CT reformation was a useful tool for evaluating the surgical results of BSSO of the mandible.

• Structural Engineering and Mechanics
• /
• 제33권3호
• /
• pp.339-355
• /
• 2009

The sealed, tuned liquid column gas damper (TLCGD) with gas-spring effect extends the frequency range of application up to about 5 Hz and efficiently increases the modal structural damping. In this paper the influence of several TLCGDs to reduce coupled translational and rotational vibrations of plan-asymmetric buildings under wind or seismic loads is investigated. The locations of the modal centers of velocity of rigidly assumed floors are crucial to select the design and the optimal position of the liquid absorbers. TLCGD's dynamics can be derived in detail using the extended non-stationary Bernoulli's equation for moving reference systems. Modal tuning of the TLCGD renders the optimal parameters by means of a geometrical transformation and in analogy to the classical tuned mass damper (TMD). Subsequently, fine-tuning is conveniently performed in the state space domain. Numerical simulations illustrate a significant reduction of the vibrations of plan-asymmetric buildings by the proposed TLCGDs.

• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.271-275
• /
• 2015

The floodlighting assists the pilot in taxiing the aircraft into and out of the final parking position and provide lighting suitable for passenger to embark and debark and for personnel to load and unload cargo. It is composed of sodium lamps which is consuming high energy. It needs to develop a dedicated LED lamp to replace the existing lamps. In this paper, We propose a suitable asymmetric angle of LED lamps to avoid a pilot's glare and to meet the standard illumination. For this, we analyze asymmetric angle of sodium lamps which are using in airport and confirm whether the illumination distribution and glare index meet the relating standards by using simulation method. Also, we study the needs of asymmetric characteristics of LED ramp by simulating the LED lamps with and without asymmetric characteristics of ramp respectively. With the simulation result, finally we propose the best asymmetric angle of LED lamp to meet the average illumination standard, and avoid a pilot's glare.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.622-627
• /
• 2019

본 논문에서는 비대칭 공극을 갖는 단상 영구자석 동기 전동기의 센서리스 운전을 위한 초기 회전자 위치 검출 알고리즘을 제안한다. 일반적인 센서리스 운전 기법 중 역기전력 기반의 센서리스 제어는 영속 및 저속운전에서 역기전력 정보를 추정하기 어렵다. 이를 위해 오픈 루프 기동 기법이 필수적으로 요구되고 일정한 방향으로의 회전을 위해서는 회전자의 초기 위치 검출이 반드시 필요하다. 본 논문에서는 단상 영구자석 동기 전동기의 자기적 특성을 이용하여 고주파 전압 주입 신호에 옵셋 전압을 추가하여 회전자 자극을 검출하는 기법을 제안한다. 다수의 실험 결과를 통하여 제안된 알고리즘의 유효성과 유용성을 검증하였다.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.406-417
• /
• 1997

초크랄스키법들 의한 8인치 실리콘 단결정 성장계에 대칭과 비대칭 커스프 자장을 인가하여 결정을 성장시켰을 때 축방향으로 일정한 산소농도분포를 가질 수 있는 적절한 인가 자장의 크기와 비대칭도에 대한 수치해석적 연구를 수행하였다. 결정이 성장할 때 커스프 자장의 형태가 유지되는 방법으로 도가니의 위치를 변화시키는 방법과 인가코일의 위치를 변화시키는 방법을 비교하였다. 대칭 커스프 자장이 인가된 경우, 축방향으로 일정한 산소농도를 얻을 수 있는 자장의 강도변화는 결정이 성장함에 따라 아래로 볼록한 형태를 띠었다. 축밟향으로 일정한 산소농도분포를 갖기 위해 도가니의 위치를 변화시키는 방법과 코일의 위치를 변화시키는 방법을 비교한 결과 비슷한 산소농도의 표준편차값을 가짐을 알 수 있었다. 비대칭 자장이 인가된 경우, 축방향으로 일정한 산소농도 분포를 얻기 위해서는 비대칭도는 결정이 성장함에 따라 점차 증가하는 양상을 보였다.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.514-523
• /
• 2021

Methods for absolute depth estimation have received lots of interest, and most algorithms are concerned about how to minimize the difference between an input defocused image and an estimated defocused image. These approaches may increase the complexity of the algorithms to calculate the defocused image from the estimation of the focused image. In this paper, we present a new method to recover depth of scene based on a sharpness-assessment algorithm. The proposed algorithm estimates the depth of scene by calculating the sharpness of deconvolved images with a specific point-spread function (PSF). While most depth estimation studies evaluate depth of the scene only behind a focal plane, the proposed method evaluates a broad depth range both nearer and farther than the focal plane. This is accomplished using an asymmetric aperture, so the PSF at a position nearer than the focal plane is different from that at a position farther than the focal plane. From the image taken with a focal plane of 160 cm, the depth of object over the broad range from 60 to 350 cm is estimated at 10 cm resolution. With an asymmetric aperture, we demonstrate the feasibility of the sharpness-assessment algorithm to recover absolute depth of scene from a single defocused image.